不同海域沉积物对尿素吸附的实验模拟研究

本文对采自渤海、黄海和东海3个典型海域的沉积物进行了尿素吸附/解吸的实验室模拟研究,用Freundlich吸附模型和Henry吸附模型分析了不同沉积物对尿素吸附的热力学特性,并研究了温度、沉积物粒径、有机质含量等因素对尿素在沉积物表面吸附的影响。结果表明,沉积物对尿素的吸附/解吸过程总体呈现3个阶段:快速吸附阶段（0~5 h）—慢速吸附阶段（5~12 h）—平衡阶段（12 h之后）。当水体中的尿素浓度较低时,沉积物解吸释放尿素,随着上覆水中尿素浓度逐渐增加,沉积物对上覆水中的尿素产生吸附行为,各海区沉积物对尿素的吸附能力由强至弱依次为渤海、东海、黄海,这可能与沉积物的类型有关。Freundlich方程和Henry方程均可模拟沉积物对尿素的吸附,温度、粒径以及沉积物中有机质含量等因素均对尿素在沉积物上的吸附产生影响,随着温度升高,尿素在沉积物上的吸附量变小,沉积物粒径越小,有机质含量越高,吸附尿素的能力越强,因此,揭示尿素在沉积物表面的环境行为时,必须考虑以上因素的影响。     

Constructing the Optimal Model of the Geoelectric Section Using Vertical Electrical Sounding Data: Case Study of the Central Part of the Garm Research Area

Izvestiya, Atmospheric and Oceanic Physics - In geophysical studies, particularly when searching for precursors of earthquakes, there are problems of investigating the geoelectric structure of the...     

一种基于GPU和内存映射文件的高分辨率遥感图像快速处理方法

高分辨率遥感图像处理经常面临程序执行时间过长和内存空间不足的问题,虽然并行计算技术可以提高遥感图像的处理速度,但是无法降低算法占用的巨大内存空间。为了解决这一问题,本文提出了一种利用CUDA和内存映射文件的高分辨率遥感图像快速处理方法,并以K-Means算法为例进行了实现。其中,CUDA技术可以有效利用GPU强大的并行计算能力,而内存映射文件技术降低了磁盘I/O速度较慢对算法性能的影响。实验结果表明,本文方法比传统K-Means聚类算法计算速度提高了30倍左右,内存使用量降低了90%以上。     

Strength Analysis on Brace Structure for Semi-Submersible in Consideration of Wave Slamming

Slamming on bracings of column stabilized units shall be considered as a possible limiting criterion under transit condition based on the requirements in DNV-OS-C103. However, the wave slamming loads under survival condition were ignored for the strength analysis of the brace structures in many semi-submersible projects. In this paper, a method of strength analysis of brace structure is proposed based on the reconstruction and extrapolation of numerical model. The full-scale mooring system, the wind, wave and current loads can be considered simultaneously. Firstly, the model tests of the semi-submersible platform in wind tunnel and wave tanker have been carried out. Secondly, the numerical models of the platform are reconstructed and extrapolated based on the results of model tests. Then, a nonlinear numerical analysis has been conducted to study the wave slamming load on brace in semi-submersible platform through the reconstructed and extrapolated numerical model. For the randomness of wave load, ten subcases under each condition have been carried out. The value of the 90% Gumble distribution values of the ten subcases are used. Finally, the strength on brace structure has been analyzed considering the wave slamming. The wave slamming loads have been compared between the survival condition and transit condition with the method. The results indicate that wave slamming under survival condition is more critical than that under transit condition. Meanwhile, the wave slamming is significant to the structural strength of the brace. It should be overall considered in the strength analysis of the brace structure.     

Dynamic Performance Investigation of A Spar-Type Floating Wind Turbine Under Different Sea Conditions

Both numerical calculation and model test are important techniques to study and forecast the dynamic responses of the floating offshore wind turbine (FOWT). However, both the methods have their own limitations at present. In this study, the dynamic responses of a 5 MW OC3 spar-type floating wind turbine designed for a water depth of 200 m are numerically investigated and validated by a 1:50 scaled model test. Moreover, the discrepancies between the numerical calculations and model tests are obtained and discussed. According to the discussions, it is found that the surge and pitch are coupled with the mooring tensions, but the heave is independent of them. Surge and pitch are mainly induced by wave under wind wave conditions. Wind and current will induce the low-frequency average responses, while wave will induce the fluctuation ranges of the responses. In addition, wave will induce the wavefrequency responses but wind and current will restrain the ranges of the responses.     

Determination of the Total Ozone Content in Cloudy Conditions based on Data from the IKFS-2 Spectrometer onboard the Meteor-M no. 2 Satellite

Izvestiya, Atmospheric and Oceanic Physics - A new technique has been developed to obtain the total ozone content (TOC) under cloudy conditions from the spectra of outgoing thermal IR radiation...     

Porosity Distribution Characteristics and Geological Analysis of Brine Storage Medium in the Qaidam Basin,Western China

Underground brine is an unusual water resource that contains abundant mineral resources. It is distributed widely in the Qaidam Basin, western China, a hyperarid inland basin located in the northern Tibetan Plateau. Pores in the brine storage medium act as storage space and transmission channels of underground brine. Therefore, the porosity of brine storage medium determines its ability to store brine. In this study, Mahai Salt Lake was used as the research area as a modern saline lake located in the north area of the Qaidam Basin. A total of 100 porosity samples were collected from eight sampling points in two profiles of the research area at sampling depths of 1.30–314.78 m. The porosity distribution characteristics and influencing factors in brine storage medium were analysed according to the measured porosity data. Based on analysis of the pore structure characteristics, the brine storage medium contains intercrystalline pores, unlike conventional freshwater storage mediums. Moreover, the primary salt rock is susceptible to dissolution by lighter brine, facilitating the formation of secondary porosity. Due to the formation of secondary pores, a porosity greater than 20% remains even at buried depths greater than 100 m. Based on the geological statistical analysis, due to the geographic location, salt formation time, and depositional environment, the porosity values of Mahai Salt Lake do not exhibit a wider distribution, but also show more extreme values than a nearby salt lake. Based on the porosity characteristics by depth, due to the presence of secondary pores, flooding, stratigraphic static pressure, and other factors, porosity shows fluctuations with increasing depth.     

捷联式航空重力扰动矢量解算及误差补偿

介绍捷联式航空重力矢量测量的基本原理,利用波数相关滤波（WCF）、比力线性校正的方法对重力扰动的水平和垂向分量进行误差补偿,评定内符合精度。对国产捷联式航空重力矢量仪的某次试验数据进行处理,以验证和评估航空重力矢量仪的性能。结果表明,在半波长分辨率为7.5 km时,6条重复测线的重力扰动水平分量经波数相关滤波处理后,东、北向分量的平均内符合精度分别从9.77 mGal、9.18 mGal提高到5.95 mGal、3.83 mGal;对比力的垂向分量线性校正后,将解算的重力扰动垂向分量再用WCF方法处理,其平均内符合精度从1.27 mGal提高到0.59 mGal。     

InSAR滑坡探测技术研究——以金沙江乌东德水电站段为例

采用3类InSAR产品和DEM数据开展金沙江流域乌东德水电站段的潜在滑坡探测,成功识别出多处已知和未知的滑坡点,并探测出滑坡体的形态及稳定性,提供了一种高效的大范围滑坡探测技术。同时采用小基线集InSAR技术对金坪子滑坡进行监测,不仅获得该滑坡的空间分区特征,也获取重点滑坡区的时间序列结果,并且与地面监测结果比较,精度达1.8 cm。展示了不同InSAR技术在不同尺度滑坡调查与监测中的应用特点。     

Responses of soil moisture to vegetation restoration type and slope length on the loess hillslope

Soil moisture, a critical variable in the hydrologic cycle, is highly influenced by vegetation restoration type. However, the relationship between spatial variation of soil moisture, vegetation restoration type and slope length is controversial. Therefore, soil moisture across soil layers (0-400 cm depth) was measured before and after the rainy season in severe drought (2015) and normal hydrological year (2016) in three vegetation restoration areas (artificial forestland, natural forestland and grassland), on the hillslopes of the Caijiachuan Catchment in the Loess area, China. The results showed that artificial forestland had the lowest soil moisture and most severe water deficit in 100-200 cm soil layers. Water depletion was higher in artificial and natural forestlands than in natural grassland. Moreover, soil moisture in the shallow soil layers (0-100 cm) under the three vegetation restoration types did not significantly vary with slope length, but a significant increase with slope length was observed in deep soil layers (below 100 cm). In 2015, a severe drought hydrological year, higher water depletion was observed at lower slope positions under three vegetation restoration types due to higher transpiration and evapotranspiration and unlikely recharge from upslope runoff. However, in 2016, a normal hydrological year, there was lower water depletion, even infiltration recharge at lower slope positions, indicating receiving a large amount of water from upslope. Vegetation restoration type, precipitation, slope length and soil depth during a rainy season, in descending order of influence, had significant effects on soil moisture. Generally, natural grassland is more beneficial for vegetation restoration than natural and artificial forestlands, and the results can provide useful information for understanding hydrological processes and improving vegetation restoration practices on the Loess Plateau