New Ar‐Ar Isotopic Ages of the Southern Tianshan Mountains,Kyrgyzstan and their Geological Implications

正Objective The Late Paleozoic Southern Tianshan Ocean is usually considered to be the last-closed ocean in the Tianshan Orogeny.However,there is still no consensus if this is indeed the case.Blueschist,eclogite and ophiolite are present in the Atbashi Range,Kyrgyzstan,which are believed to be the relics of the Southern Tianshan Ocean.New data obtained through Ar-Ar isotopic analysis in this     

Mixing of Enriched Lithospheric Mantle-Derived and Crustal Magmas: Evidence from the Habo Cenozoic Porphyry in Western Yunnan

New zircon U–Pb ages, whole-rock geochemistry and zircon Hf isotopes from the Habo porphyry Western Yunnan, China, were determined to provide constraints on the timing of uplift of the Eastern Tibetan Plateau. The intrusive rocks consist of shoshonitic porphyry (syenite porphyry and monzonite porphyry). Zircon laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U–Pb dating indicates coeval emplacement ages of ~35 Ma. The porphyries have alkaline affinities, enrichment in large ion lithophile elements (LILEs) and light rare earth elements (LREEs) (e.g., Rb, Th, U, Pb), with depletion of high field strength elements (HFSEs) (e.g., Nb, Ti, Ta) and weak Eu anomalies. They display uniform Lu–Hf isotopic compositions with negative zircon εHf(t) values ranging from -3.9 to -0.6. The chemical characteristics of the syenite porphyries indicated that they most likely originated from the lower crust, with mantle-derived material involved in their generation. Geochemically, the monzonite porphyries are similar to the syenite porphyries; however, the lower MgO contents suggest that they were produced by different degrees of partial melting of the same lower crust source. Combined with the geochemical and isotopic data in this paper, imply that the alkali-rich porphyries of the Habo polymetallic deposit were derived from the partial melting of lower crust, enriched by mantle magma, formed in a conversion stage from stress extrusion (a strike-slip shear process) to local stress relaxation (a strike-slip pull-apart process) at the Ailaoshao tectonic zone.     

Ore-forming Fluid and Mineral Source of the Hongshi Copper Deposit in the Kalatage Area, East Tianshan, Xinjiang, NW China

The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.     

安哥拉罗安达湿陷性砂的载荷试验研究

安哥拉罗安达广泛分布的湿陷性砂（Quelo砂）,是一种对水十分敏感的特殊砂土,具有浸水后强度降低,并产生湿陷变形的特殊性质,由于缺乏相应的资料和工程经验,其湿陷程度和承载特性是评价的难点。本文通过天然和浸水饱和条件下的载荷试验,实测和研究了罗安达Quelo砂的湿陷变形特点和不同条件下的承载力特征。试验研究结果显示,罗安达Quelo砂是一种湿陷程度为轻微—中等的湿陷性土;Quelo砂的承载力对水分异常敏感,地基土含水率的微小变化即可导致承载力数倍的降低,且饱和后的承载力较小,试验场地浸水饱和后的地基承载力深度修正系数可取1.07。试验表明,在工程实践中考虑地基土含水率变化对地基承载力的影响,不采用消除地基全部湿陷量或部分湿陷量的方法,而将红砂地基当做一般地基进行设计是可行的。     

锚固岩体的单轴压缩力学特性及其各向异性特征分析

通过对含有锚杆的水泥砂浆试件进行单轴压缩试验,系统地研究了锚杆的布置方式对试件强度和变形特性的影响。研究结果表明:(1) 当锚杆横截面的连线呈直线或者正方形时,随着锚杆数量的增加,试件的抗压强度、弹性模量均会逐渐增加,试件峰值应变的变化没有固定规律;(2) 当锚杆横截面的连线呈直线时且试件中的锚杆数量相同时,荷载方向垂直于锚杆横截面的连线时试件的抗压强度和弹性模量,大于荷载方向平行于锚杆横截面的连线时试件的抗压强度和弹性模量。     

重塑压实黏土Ⅰ型断裂试验研究

为探究重塑黏土Ⅰ型断裂韧度,本文在前人研究基础上,通过对应变控制式直剪仪进行改造,消除了传统三点弯曲试验对土体断裂韧度测试所带来的影响,研制了土体Ⅰ型断裂韧度测试仪,并对重塑黏土进行了一系列试验。试验结果表明:新研制出的土体Ⅰ型断裂韧度测试仪具有较好的可靠性;对具有相同物理状态的试样,U 形裂纹试样的断裂韧度最大,三角形裂纹试样的断裂韧度最小;试样的含水率和干密度其断裂韧度KIC具有显著影响,随含水率增加,断裂韧度呈现先增后减的变化规律,而随干密度增加,断裂韧度几乎线性增加;在试验采用的加载速率范围内,加载速率对断裂韧度的影响较小。     

考虑方位漂移的水平井井眼轨道设计

目前,深层页岩气水平井在钻井过程中经常出现方位漂移的问题,方位漂移严重影响了水平井的井眼轨迹控制,进而影响水平井的准确中靶。在现场施工中,通常根据施工区以前的钻井经验,在进行定向造斜时,先估计出一个“方位超前角”,这种现场的做法有着很大的不确定性,并且可能出现较大误差。本文提出了考虑方位漂移的水平井井眼轨道优化设计的方法,解决了仅凭现场经验给出的“超前角”不准确的问题。考虑方位漂移的水平井井眼轨道优化设计按照井段划分,将地层因素与井身剖面结合起来求取井段的平均方位漂移率。根据该方法研制开发了考虑方位漂移的水平井井眼轨道优化设计软件,并通过举例进行了验证,证明了方法是可行的。     

地质导向技术在L型煤层气水平井 T-P05井中的应用

通过分析山西L型煤层气水平井的技术难点,着重建立造斜着陆与水平段导向两大导向模型,形成了以标志层划分与对比、地层倾角推算、地质建模和实时轨迹控制四个方面为主的L型煤层气水平井地质导向技术流程,该技术在T-P05井的成功应用,不仅丰富了煤层气水平井地质导向技术的内容与方法,更进一步验证了该技术在现场具有较强的可操作性和良好的应用前景,值得大力推广。     

贵州松桃大屋锰矿床主要地质特征与找矿预测

松桃大屋锰矿是贵州省地矿局103地质队于上世纪70年代勘查评价的中型锰矿床。锰矿产于南华系大塘坡组第一段黑色岩系底部,矿体呈层状、似层状产出,矿层走向北东约70°,矿体平均厚1. 42 m,平均品位18. 85%。矿区从北西向南东,含锰岩系、锰矿体从无到有。大屋锰矿床只保留了古天然气渗漏沉积成矿系统中的过渡相和边缘相,中心相应在齐公坡一带,但已被剥蚀殆尽。通过构造古地理恢复分析,推测南华纪大屋地堑盆地长大于14 km、宽约4 km,沿北东70°方向展布。预测盆地北东柳树塘、大坳至孟溪一带还具有发现中-大型规模锰矿床的潜力。