水位改正中的基准面空间内插及其误差约束

分析了水位改正中隐含的基准面空间内插形式,理论推导了基准面空间内插的数学描述,表明水位改正中隐含的基准面空间内插方式与潮汐比较参数的内插方式相一致,基准面空间内插误差为基准面相对平均海面的垂直差距的空间内插误差。仿真实验对此进行了验证。现阶段减弱与控制该误差的最可行手段是,由L值模型仿真不同验潮站空间配置下基准面空间内插误差的空间分布,为验潮站布设设计提供先验信息。而未来建立以平均海面为基本海洋垂直基准的综合海洋垂直基准框架是最有效手段。海洋测量水深数据的处理和计算机存储都应保留以平均海面为基准面的成果,通过垂直基准转换方式可满足多用途需求。     

Typical Equilibrium Beach Profile Models and Their Significances from Different Segments of A Headland-Bay Beach

This study introduces three typical models on equilibrium beach profile, and discusses the application limitations of these models. Then this study examines the selections for applying these models on different coastal segments of a headland-bay beach in west Guangdong, South China, and explores the physical significances of those parameters in the models. The results indicate that: (1) Bodge’s model is more in line with the equilibrium beach profile of the tangential or transitional segment, whereas Lee’s model is more consistent with the shadow profile; (2) most of the parameters in three models have clear physical significances in accordance with the actual characteristics of this headland-bay beach; and (3) both the selections for the equilibrium beach profile from different segments and significances of most of the parameters in three models are in essence correlated with the morphodynamic states at various coastal locations.     

深海细菌Pseudomonas sp. IOFA1中甲醛歧化酶FM11的纯化及性质研究

从印度洋深海沉积物中分离出一株能够高效降解甲醛的假单胞菌(Pseudomonas sp.IOFA1),该菌株可在40 min内完全降解100 mg/cm~3的甲醛.通过阴离子交换柱层析对菌株破碎液中的粗酶液进行纯化,得到一条具有甲醛降解活性的单一蛋白条带.经MALDI-TOF/TOF质谱鉴定,该蛋白为甲醛歧化酶蛋白(FM11).序列分析表明FM11与其它物种已知醛脱氢酶的氨基酸序列最高相似性为65%;结构域分析表明FM11含有2个保守的锌结合位点和一个NAD结合位点.酶学性质分析结果显示,FM11的最适反应温度为40℃,在25~50℃范围内能够保留95%以上的酶活力,尤其是在高于70℃的高温环境下仍保有约50%的活力,表现出广泛的温度适应性.FM11具有非常广泛的最适反应pH值范围(pH值为5~9),且在pH值4和pH值10时仍分别保留50%和80%左右的酶活力,表现出广泛的pH适应性.在pH值为5~7的条件下孵育1 h后,FM11仍保有97%以上的酶活,且在pH值为7~10条件下孵育1 h后,仍保留90%以上的酶活,表现出极好的酸性和碱性稳定性.Ca~(2+)、Mg~(2+)在低浓度时(0.5 mmol/dm~3)对FM11有较明显的激活作用.这些研究为我们进一步开发Pseudomonas sp.IOFA1甲醛歧化酶在降解甲醛方面的用途奠定了基础.     

The Late Triassic I–Type Granites from the Longmu Co–Shuanghu Suture Zone in the interior of Tibetan Plateau, China: Petrogenesis and Implication for Slab Break–Off

The Jiangaidarina granitic mass(JM) is an important part of the magmatic belt in Longmu CoShuanghu Suture Zone(LSSZ) in the central Tibetan Plateau. An integrated research involving wholerock geochemistry, zircon LA-ICP-MS U-Pb ages and Hf isotopic compositions was carried out to define the timing, genesis and tectonic setting of the JM. Zircon LA-ICP-MS U-Pb ages have been obtained ranging from 210 to 215 Ma, rather than the Early Jurassic as previously thought. Fifteen granite samples contain hornblendes and show a negative correlation between P_2 O_5 and SiO_2, indicating that the JM is an I-type granite. All the granites are enriched in LREE relative to HREE, with negative Eu anomalies(Eu/Eu*=0.56-0.81), and have similar trace elements patterns, with depletion of Ba, Nb, Sr and P. These suggest that the JM was fractionated, and this is also proved by the characteristic of negative correlations between oxide elements(TiO_2, MgO, FeOt, MnO, CaO) and SiO_2. Almost all ε_(Hf)(t) values of the granites are between-10.3 and-5.8, implying that the JM has a crustal source intimately related with the South Qiangtang Block(SQB), except for one(+10.2), showing a minor contribution from mantle source.Moreover, relatively low Na_2 O/K_2 O ratios(0.42-0.93) and high A/CNK values(0.91-1.50) reflect that the JM was predominately derived from the medium-high potassium basaltic crust, interacted with greywacke. Our new geochemical data and geochronological results imply that the Late Triassic magmas were generated in a post-collisional tectonic setting, probably caused by slab break-off of the Longmu Co-Shuanghu Tethyan Ocean(LSTO). This mechanism caused the asthenosphere upwelling, formed extension setting, offered an enormous amount of heat, and provided favorable conditions for emplacement of voluminous felsic magmas. Furthermore, the LSTO could be completely closed during the Middle Triassic, succeed by continental collision and later the slab broke off in the Late Triassic.     

New Ar‐Ar Isotopic Ages of the Southern Tianshan Mountains,Kyrgyzstan and their Geological Implications

正Objective The Late Paleozoic Southern Tianshan Ocean is usually considered to be the last-closed ocean in the Tianshan Orogeny.However,there is still no consensus if this is indeed the case.Blueschist,eclogite and ophiolite are present in the Atbashi Range,Kyrgyzstan,which are believed to be the relics of the Southern Tianshan Ocean.New data obtained through Ar-Ar isotopic analysis in this     

Mixing of Enriched Lithospheric Mantle-Derived and Crustal Magmas: Evidence from the Habo Cenozoic Porphyry in Western Yunnan

New zircon U–Pb ages, whole-rock geochemistry and zircon Hf isotopes from the Habo porphyry Western Yunnan, China, were determined to provide constraints on the timing of uplift of the Eastern Tibetan Plateau. The intrusive rocks consist of shoshonitic porphyry (syenite porphyry and monzonite porphyry). Zircon laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U–Pb dating indicates coeval emplacement ages of ~35 Ma. The porphyries have alkaline affinities, enrichment in large ion lithophile elements (LILEs) and light rare earth elements (LREEs) (e.g., Rb, Th, U, Pb), with depletion of high field strength elements (HFSEs) (e.g., Nb, Ti, Ta) and weak Eu anomalies. They display uniform Lu–Hf isotopic compositions with negative zircon εHf(t) values ranging from -3.9 to -0.6. The chemical characteristics of the syenite porphyries indicated that they most likely originated from the lower crust, with mantle-derived material involved in their generation. Geochemically, the monzonite porphyries are similar to the syenite porphyries; however, the lower MgO contents suggest that they were produced by different degrees of partial melting of the same lower crust source. Combined with the geochemical and isotopic data in this paper, imply that the alkali-rich porphyries of the Habo polymetallic deposit were derived from the partial melting of lower crust, enriched by mantle magma, formed in a conversion stage from stress extrusion (a strike-slip shear process) to local stress relaxation (a strike-slip pull-apart process) at the Ailaoshao tectonic zone.     

Ore-forming Fluid and Mineral Source of the Hongshi Copper Deposit in the Kalatage Area, East Tianshan, Xinjiang, NW China

The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.     

安哥拉罗安达湿陷性砂的载荷试验研究

安哥拉罗安达广泛分布的湿陷性砂（Quelo砂）,是一种对水十分敏感的特殊砂土,具有浸水后强度降低,并产生湿陷变形的特殊性质,由于缺乏相应的资料和工程经验,其湿陷程度和承载特性是评价的难点。本文通过天然和浸水饱和条件下的载荷试验,实测和研究了罗安达Quelo砂的湿陷变形特点和不同条件下的承载力特征。试验研究结果显示,罗安达Quelo砂是一种湿陷程度为轻微—中等的湿陷性土;Quelo砂的承载力对水分异常敏感,地基土含水率的微小变化即可导致承载力数倍的降低,且饱和后的承载力较小,试验场地浸水饱和后的地基承载力深度修正系数可取1.07。试验表明,在工程实践中考虑地基土含水率变化对地基承载力的影响,不采用消除地基全部湿陷量或部分湿陷量的方法,而将红砂地基当做一般地基进行设计是可行的。