Ultimate Bending Capacity of Strain Hardening Steel Pipes

Based on Hencky’s total strain theory of plasticity, ultimate bending capacity of steel pipes can be determined analytically assuming an elastic-linear strain hardening material, the simplified analytical solution is proposed as well. Good agreement is observed when ultimate bending capacities obtained from analytical solutions are compared with experimental results from full-size tests of steel pipes. Parametric study conducted as part of this paper indicates that the strain hardening effect has significant influence on the ultimate bending capacity of steel pipes. It is shown that pipe considering strain hardening yields higher bending capacity than that of pipe assumed as elastic-perfectly plastic material. Thus, the ignorance of strain hardening effect, as commonly assumed in current codes, may underestimate the ultimate bending capacity of steel pipes. The solutions proposed in this paper are applicable in the design of offshore/onshore steel pipes, supports of offshore platforms and other tubular structural steel members.     

新疆乌鲁木齐东部早二叠世枕状玄武岩火山岩系的发现及大地构造意义

新疆乌鲁木齐东部野生动物园附近的下二叠统下部发育了一套以枕状玄武岩为代表的火山岩系。该玄武岩在公路上发育有两层,上部一层较厚,可达7～8m,下部一层2～3m。岩枕近圆形、肾状、枕状、条带状或蠕虫状等,多呈顶突底凹。岩枕长轴平行排列,长轴基本顺层面分布;有的岩枕中含大量海百合茎、珊瑚及腕足等生物化石。在TAS图中大部分样品位于玄武粗安岩,而在K_2O-SiO_2图上主要落在低K拉斑玄武岩区间。MnOTiO_2-P_2O_5图解显示以岛弧为主,常量元素的特征总体上更接近岛弧玄武岩。在Hf/3-Th-Ta图解上也以岛弧为主;在Zr/4-2Nb-Y图解显示以火山弧为主,常量元素的特点总体上更接近岛弧玄武岩。微量元素原始地幔标准化蛛网图表明为同源岩浆产物,具高度相似的演化过程,多种微量元素判别图揭示岛弧-弧后盆地环境;稀土总量明显较低,在稀土元素球粒陨石标准化图解上,其稀土分布曲线一致性较好,呈轻稀土富集右倾型,Eu为负异常,揭示了乌东玄武岩岩浆有一定分异。稀土元素配分曲线与弧后盆地玄武岩(BABB)具有很好的一致性。U-Pb和谐年龄为283±8Ma,结合地层及古生物资料推测乌东玄武岩喷发的时间为早二叠世早期。乌东枕状玄武岩-灰岩之下有一套(磨拉石)底砾岩,初定为石炭-二叠系的界限。底砾岩之下为下石炭统的中厚层灰岩,具有明显的喀斯特化,为不整合接触,揭示在两者之间发生了造山作用。通过对新疆乌东早二叠世早期的枕状玄武岩的地质特征、地球化学特征、形成环境和时代的研究,表明乌东一带早二叠世主要为一个岛弧和弧后盆地环境,进一步揭示了北天山北缘石炭-二叠世碰撞闭合造山之后又发生了松弛扩张形成了弧后盆地,海水再度大规模入侵。最终的闭合碰撞造山的时间最早可能在晚二叠世。由于乌东枕状玄武岩在喷出地表后受到了生物化石和陆源碎屑的污染,再加上侵入过程中地壳的污染,使其具有非常复杂的地球化学特点和多解性。乌东玄武岩的研究对于了解博格达山、甚至天山中段在晚古生代的构造沉积演化及造山作用具有重要意义,同时对准噶尔盆地、吐哈盆地及三塘湖盆地油气资源的形成与分布具有重要意义。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

40Ar‐39Ar Dating of the Mahuaping W‐Be deposit,Northwestern Yunnnan Province,China, and its Geological Significance

正Objective Located near the intersection of Yangtze craton,TibetSanjiang orogen and Songpan-Ganzi orogen of Northwest Yunnan Province,the Mahuaping deposit is a unique large-scale tungsten-beryllium-fluorite ore deposit ever discovered in this area.In recent years,many studies have been carried out in Sanjiang Tethyan metallogenic belt and     

New Ar‐Ar Isotopic Ages of the Southern Tianshan Mountains,Kyrgyzstan and their Geological Implications

正Objective The Late Paleozoic Southern Tianshan Ocean is usually considered to be the last-closed ocean in the Tianshan Orogeny.However,there is still no consensus if this is indeed the case.Blueschist,eclogite and ophiolite are present in the Atbashi Range,Kyrgyzstan,which are believed to be the relics of the Southern Tianshan Ocean.New data obtained through Ar-Ar isotopic analysis in this     

Provenance Study of Fe–Ti Oxide Minerals in the Quaternary Sediments in Yichang Area and Its Implication of Formation Time of the Yangtze Three Gorges, China

The Three Gorges are considered to be critical to understand the formation of Yangtze River. Recent research results suggest that the Yangtze Three Gorges was created during the Quaternary but the exact time is debatable. Fe–Ti oxide minerals are seldom used to study sediment provenance, expecially using scanning electron microscopy(SEM), and energy dispersive spectrometer(EDS). In this study, the provenance of Quaternary sediments in Yichang area, which is located to the east of the Yangtze Three Gorges, was investigated by using SEM and EDS to research Fe–Ti oxides. The Panzhihua vanadium titanomagnetite and Emeishan basalt outcrop are located to the west of the Three Gorges. Further, the materials from them are observed in the Quaternary sediments of Yichang area. Fe–Ti oxide minerals from the Huangling granite are observed in the Yunchi and Shanxiyao Formations, which were formed before 0.75 Ma B.P., whereas Fe–Ti oxide minerals from the Huangling granite, Panzhihua vanadium titanomagnetite, and Emeishan basalt are observed in the riverbed and fifth-terrace sediments of the Yangtze River, which were formed after 0.73 Ma B.P.. Thus, we can infer that the Three Gorges formed after the deposition of the Shanxi Formation and before the fifth-terrace; i.e., 0.75–0.73 Ma B.P..