灵武市体育中心沉降监测分析

根据相关规范,对灵武市体育中心建设过程进行沉降监测,通过监测结果得到沉降量和沉降速率随时间的变化趋势并进行预测分析,得到该建筑物的沉降变形规律,用于了解工程安全情况。     

Inpho交互式方位角定义在ADS影像生产中的应用与研究

目前,Inpho全数字摄影测量系统针对航空三线阵影像具有较为成熟的处理流程。但是随着摄区环境和飞行成本要求的不断提高,航线方向不再局限于坐标轴方向,斜飞模式逐渐增多。本文在Inpho系统DOM影像制作原理的基础上,对比研究交互式方位角定义在ADS影像生产中的普遍适用性,进一步优化Inpho系统针对ADS数据的解决方案。     

矿业城市土地利用/覆被变化的水文效应研究

矿业城市受到矿山开发与城市扩张的双重影响,生态环境遭到严重破坏,水环境问题尤为突出。本文以煤矿城市河南省鹤壁市为研究区,根据汤河流域1970—2015年土地利用覆被时空变化特征设定5种不同时期土地利用情景,采用SWAT模型模拟分析5期土地利用/覆被变化的水文效应以及变化规律。研究结果显示,1970—2015年间,土地利用变化引起流域内蒸散发量、土壤下渗量和地下径流量年均分别减少-1. 48 mm、-0.38 mm、-0.29 mm,地表径流量年均增加0.76 mm,汛期与非汛期径流增加;在不同水文年份,土地利用变化对平水年的年径流影响最为明显,对枯水年年径流的影响大于丰水年。本文主要提出了以矿业城市土地利用变化对水循环的影响,该方法对矿区范围内水资源的科学管理具有一定的参考意义。     

一种实用型无人机三维模型重建方法

针对无人机三维模型无法单体化及难以构建实用模型的问题,文章研究了一种实用型无人机三维模型重建方法。首先,利用无人机倾斜摄影测量技术获取研究区5个角度高清数据,通过空中三角测量、加密点云、三维重建、产品输出等智能化技术处理生成了DOM、DSM、三维模型;其次,研究无人机DOM(可见光波段)的特性,利用面向对象分类方法提取了研究区地类信息;最后,借助Skyline平台,根据高度属性将提取的地类信息转换为2.5维矢量,使之与三维模型无偏差叠加,构建实用型无人机三维模型。结果表明:三维模型外观逼真,具有查询、检索、定位等实用功能,有效地改变了无人机三维模型仅有漫游的现象,同时研究的技术方法对于构建三维智慧城市具有重大意义。     

基于多种测绘装备协同工作在白河滑坡灾害中的应用

无人机低空摄影测量技术在应对各类地质灾害方面有着明显优势。本文以安康市白河县茅坪镇山体滑坡灾害为例,介绍了灾害应急中两大无人机系统以及IBIS微形变监测设备所发挥的巨大作用,阐述了无人机飞行设计、现场快速影像处理技术、灾区三维模型构建技术以及潜在危险区域形变量实时监测,并通过获取的数据成果对灾情进行了分析。     

More than two hundred and fifty thousand spectroscopic binary or variable star candidates discovered by LAMOST

About 786.4 thousand stars were observed by LAMOST twice or more during the first stage of its spectroscopic survey. The radial velocity differences for about 256 thousand targets are larger than10 km s^-1 and they are possible spectroscopic binary or variable candidates(SBVCs). It is shown that most SBVCs are slightly metal poorer than the Sun. There are two peaks in the temperature distribution of SBVCs around 5760 K and 4870 K, while there are three peaks in the distribution of the gravitational acceleration at 2.461, 4.171 and 4.621 cm s^-2. The locations of SBVCs on the [Fe/H]-T, [Fe/H]-log g, log g-T and H-R diagrams are investigated. It is found that the detected SBVCs could be classified into four groups. The first group has higher log g～4.621 and lower T ～ 4870 K which are mainly cool red dwarf binaries. The second group of SBVCs has logg around 4.171 cm s^-2 that includes binaries and pulsating stars such as δSet and γ Dor variables. The gravitational accelerations of the third group of SBVCs are higher and some of them are below the zero-age main sequence. They may be contact binaries in which the primary components are losing energy to the secondaries in the common envelopes and are at a special stellar evolutionary stage.The last group is composed of giants or supergiants with log g around 2.461 cm s^-2 that may be evolved pulsating stars. One target(C134624.29+333921.2) is confirmed as an eclipsing binary with a period of 0.65 days. A preliminary analysis suggests that it is a detached binary with a mass ratio of 0.46. The primary fills its critical Roche lobe by about 89%, indicating that mass transfer will occur between the two components.     

X-ray activity from different types of stars

X-ray emission is an important indicator of stellar activity. In this paper, we study stellar Xray activity using the XMM-Newton and LAMOST data for different types of stars. We provide a sample including 1259 X-ray-emitting stars, of which 1090 have accurate stellar parameter estimations. Our sample size is much larger than those used in previous works. We find a bimodal distribution of the X-ray to optical flux ratio(log(fX/fV)) for G and K stars. We interpret that this bimodality is due to two subpopulations with different coronal heating rates. Furthermore, using the full widths at half maxima calculated from Hα and Hβ lines, we show that these stars in the inactive peaks have smaller rotational velocities. This is consistent with the magnetic dynamo theory that presumes stars with low rotational velocities have low levels of stellar activity. We also examine the correlation between log(fX/fV) and luminosity of the excess emission in the Hα line, and find a tight relation between the coronal and chromospheric activity indicators.     

基于全过程的本科毕业设计质量评价体系构建

对毕业设计质量评价方法进行分析,总结出考核方式单一、成绩评定不够客观及监督检查力度小是毕业设计质量评价存在的主要问题。本文从毕业设计质量考核过程化、毕业设计成果呈现方式多样化和毕业设计质量检查制度化3方面构建教师和学生共同评价的全过程质量评价体系,为全面客观评价毕业设计质量提供参考。     

深度卷积神经网络支持下的遥感影像飞机检测

针对YOLOv3算法对小目标检测较差及出现较多漏检的问题,本文提出了一种优化的YOLOv3算法.首先使用K-means算法计算出与数据集相适用的锚框;其次将扩张卷积引入到YOLOv3网络,用来增强网络高层的感受野,改善小目标的检测效果;然后使用深度可分离卷积取代YOLOv3网络残差模块中的普通卷积,可减少计算量,从而得到一种新型卷积神经网络结构;最后在数据集上进行对比试验.结果表明,优化的YOLOv3算法能够检测出更多目标,降低漏检率,相比于YOLOv3算法,其召回率提高11.86%,F1-score提高2.99%.     

顾及局部与结构特征的稀疏多项式逻辑回归高光谱图像分类方法

稀疏多项式逻辑回归在分类中仅利用图像光谱信息,导致分类效果不太理想.本文提出了一种顾及局部与结构特征的稀疏多项式逻辑回归高光谱图像分类方法.首先利用加权均值滤波与拓展形态学多属性剖面对原始高光谱图像进行局部与结构特征提取;然后对二者进行加权平均特征级融合以获取更具唯一性的像元特征;最后由稀疏多项式逻辑回归分类器对融合结果进行分类.结果表明,本文方法能有效地提高分类精度,而且具有较强的稳健性.