黄茅海河口湾现代动力地貌体系和冲淤过程分析

1980—1993年对黄茅海河口湾进行沉积物采样和水流测定及水深测量。根据水动力和地形条件，冲淤分析及Mclaren模型研究河口湾的动力地貌体系、冲淤特征和现代沉积物运移。结果表明：（1）水下地形主要为下泄流或上溯流控制的“深槽－槽沟－浅滩－湾口”的动力地貌体系，反映了河口湾“东进西出”的水流格局；（2）整个河口湾以淤积为主，只有崖门深槽有较明显的优势冲刷特征，并随着崖门深槽向海推移和河口湾“东进西出”水动力作用，黄茅海落潮三角洲相应向西南进积；（3）应用Mclaren模型揭示了黄茅海河口湾现代沉积物运移规律，同样反映了河口湾具有“东进西出”的运移趋势。     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

星载SAR浅海水下地形和水深测量模拟仿真──水下地形高度、坡度和方向与可测水深分析

根据星载合成孔径雷达(SAR)浅海水下地形和水深成像机理,建立了浅海水下地形和水深雷达后向散射截面仿真模型.利用该模型模拟并分析了不同地形条件下,浅海水下地形的雷达后向散射截面.分析结果表明,水下地形高度越高,SAR可测量的水深越深;水下地形坡度越大,越易被SAR所观测.水下地形的星载SAR测量还与水下地形的方向有关,与卫星飞行方向平行的水下地形最易被SAR观测,与卫星飞行方向垂直的水下地形最不易被SAR观测.     

南麂列岛海洋自然保护区潮间带贝类资源时空分布

为了解南麂列岛海洋自然保护区潮间带贝类十多年来的动态变化,在1992年研究基础上,于2003年度再赴南麂列岛对岩、沙相贝类进行了研究.本次调查鉴定出贝类105种,其中岩相93种、沙相12种,6种为南麂列岛新记录种,对岩相、沙相贝类组合的生态特征进行了分析,岩相多样性和均匀度指数(1.25~2.20和0.54~0.70)高于沙相的(0.23~0.95和0.17~0.94).岩相贝类数量为3025.70g/m2和2660个/m2,生物量垂直分布为低潮区最高(6471.99g/m2),中潮区居中(3772.09g/m2),高潮区最小(78.35g/m2),栖息密度为中潮区最大(4245个/m2),低潮区居中(2973个/m2),高潮区最小(439个/m2).沙相贝类数量为16.81g/m2和11个/m2,低潮区(29.43g/m2和11个/m2)大于中潮区(14.01g/m2和10个/m2).通过与以往资料比对发现,岩礁贝类数量有所增加,沙滩贝类数量则明显下降,监控区贝类数量明显多于其他区域,对贝类资源变化产生影响的相关因子作了分析探讨.     

我国近海沉积层地震速度特征

我国近海纵向上发育了新生界、中生界碎屑岩和古生界沉积地层。在分析整理收集到的地层速度资料的基础上,分析了地层速度的变化规律:沉积层地震速度随地层的埋深增加而增加,新地层速度低、老地层速度高;欠压实地层的砂岩速度与泥岩速度基本相当或低于泥岩速度,正常地层的砂岩速度大于泥岩速度;砂岩储层的速度随孔隙度的增加而降低,流体成分的变化对速度的影响不大。     

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.     

The Structure of A Turbulent Jet in A Crossflow-Effect of Jet-Crossflow Velocity

A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined jets without excess streamwise momentum are considered. The numerical results of the Standard two-equation k-ε model show that the turbulent structure can be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R> 4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallel with the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20-60. The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated, vvith distinct double concentr     

台湾海峡南部灯光围网捕捞的水温选择及其季节变化

对1989－1998年台湾海峡南部渔场生产记录资料分析结果表明：灯光围网捕捞主要捕捞年适宜水温16．1－30℃，年较佳水温20．1－30℃，年最佳选择水温21．2－29℃。环境水温过高或过低，不利于灯光围网生产。各季度的选择水温，冬季为21．2－24℃，春季为21．1－27℃，夏季为26．1－29℃，秋季为25．1－28℃；各月选择水温为该月环境水温的中间值至偏高2℃，多数比中间值偏高1－2℃。选择水温范围的宽幅3－5℃；随环境水温升高或降低，鱼类对水温选择发生同的、同步的变化，是一种渐进的过程；在环境水温上升或持续高温，温跃层存在、底层低温涌升水强盛的条件下，灯光围网的作业效率均受影响。     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.