工厂化养殖暗纹东方鱼屯致病菌的分离和鉴定

从不同养殖场患病暗纹东方鱼屯(Takifaguobscurus)的鳃、肠、肝、肌肉及溃疡部位分离到9株菌株,经人工感染致病性试验,其T-22、T-11、J-2、H-3、H-5表现出较强的致病性,出现症状与自然发病鱼相同。通过对菌体形态特征、培养特性和API20E细菌生化快速鉴定试条的测定,分别鉴定为温和气单胞菌(Aeromonassobria)、豚鼠气单胞菌(Aeromonascaviae)、嗜水气单胞菌(Aeromonashydrophila)、类志贺邻单胞菌(Plesiomonasshigelloides)、霍乱弧菌(Vibriocholerae)。证实这5株菌为致病菌。药敏试验结果表明9种药物对温和气单胞菌、豚鼠气单胞菌、霍乱弧菌均有较好的抑菌效果;嗜水气单胞菌表现出明显的耐药性。氟嗪酸、环丙沙星、复合磺胺对类志贺邻单胞菌有一定抑菌效果。     

Motive force of Qinghai-Tibet Plateau moving to east

A calculation formula on spherical pattern of Qinghai-Tibet plateau moving model is established. Tibet massif moves norward by east in speed of 28 mm/a, Ganshu-Qinghai massif moves to northeast in speed of 15 mm/a, Qomolangma Feng moves northward by a few east in speed of 35 ～42 mm/a. The low latitude perimeter is longer than the nigh latitude perimeter. When the Tibet massif moves northward, its latitude perimeter must be contracted and the Tibet massif must move eastward by Coriolis. Coriolis force is inertial in earth rotation. It makes the fall body turning to east and the rising block turning westward. In the Northern Hemisphere, it makes the northward body turning to east and the southward block turning to west.This is the reason why the tectonic zones of western Pacific are different from those of eastern Pacific.     

A field and theoretical analysis of garnet+chlorite+chloritoid+biotite assemblages from the tri-state (MA,CT, NY) area,USA

The prograde evolution of minerals in metapelites of a Barrovian sequence from the tri-state area (Massachusetts, Connecticut, New York) of the Taconic Range involves assemblages with garnet (Ga), chlorite (Ch), chloritoid (Ct), biotite (Bi) and staurolite (St). Detailed petrologic observations, mineral compositions and chemical zoning in garnet show: (1) garnet high in Mn and Fe but low in Mg is stable with chlorite at grades below those where chloritoid+biotite is found; (2) early formed garnet reacted partially to form Ct+Bi at intermediate grades; (3) at higher grades garnet (with low Mn)+chlorite is again produced, at the expense of chloritoid+biotite, suggesting a reversal in the continuous reaction involving the phases Ga, Ch, Ct and Bi. Thermodynamic modeling of the assemblage Ga+Ch+Ct+Bi±St in the MnKFMASH system reveals: (1) in the MnKFASH system the prograde reaction is Ga+Ch=Ct+Bi whereas in the KFMASH system the prograde reaction is the opposite: Ct+Bi=Ga+Ch; (2) the Ga–Ch–Ct–Bi–St invariant point in the KFMASH system occurs twice, at approximately 6.5 kbar, 545° C and 14.8 kbar, 580° C (although one of them may be metastable in a complex phase system); the appearance of the petrogenetic grid is markedly different from that of Albee, but similar to that of Spear and Cheney; (3) as a consequence, in the KFMASH system, chloritoid+biotite are stable over a wide range of P-T conditions whereas garnet+chlorite assemblages are restricted to a narrow band of P-T conditions; (4) MnO increases the stability field of Ga+Ch relative to both Ct+Bi at low temperatures, and St+Bi at high temperatures; (5) in natural samples the occurrence of Ct+Bi is controlled more by bulk Mg–Fe(-Mn) composition than P-T conditions. Specifically, Ct+Bi is restricted to bulk compositions with Fe/(Mg+Fe+Mn)>0.6. Rocks with Fe/(Mg+Fe+Mn)<0.5 are likely to display only chlorite+biotite at low grade. These observations are consistent with Wang and Spear and Spear and Cheney.     

Time scale of an early to mid-Paleozoic orogenic cycle of the long-lived Central Asian Orogenic Belt, Inner Mongolia of China: Implications for continental growth

We present a detailed, new time scale for an orogenic cycle (oceanic accretion–subduction–collision) that provides significant insights into Paleozoic continental growth processes in the southeastern segment of the long-lived Central Asian Orogenic Belt (CAOB). The most prominent tectonic feature in Inner Mongolia is the association of paired orogens. A southern orogen forms a typical arc-trench complex, in which a supra-subduction zone ophiolite records successive phases during its life cycle: birth (ca. 497–477 Ma), when the ocean floor of the ophiolite was formed; (2) youth (ca. 473–470 Ma), characterized by mantle wedge magmatism; (3) shortly after maturity (ca. 461–450 Ma), high-Mg adakite and adakite were produced by slab melting and subsequent interaction of the melt with the mantle wedge; (4) death, caused by subduction of a ridge crest (ca. 451–434 Ma) and by ridge collision with the ophiolite (ca. 428–423 Ma). The evolution of the magmatic arc exhibits three major coherent phases: arc volcanism (ca. 488–444 Ma); adakite plutonism (ca. 448–438 Ma) and collision (ca. 419–415 Ma) of the arc with a passive continental margin. The northern orogen, a product of ridge-trench interaction, evolved progressively from coeval generation of near-trench plutons (ca. 498–461 Ma) and juvenile arc crust (ca. 484–469 Ma), to ridge subduction (ca. 440–434 Ma), microcontinent accretion (ca. 430–420 Ma), and finally to forearc formation. The paired orogens followed a consistent progression from ocean floor subduction/arc formation (ca. 500–438 Ma), ridge subduction (ca. 451–434 Ma) to microcontinent accretion/collision (ca. 430–415 Ma); ridge subduction records the turning point that transformed oceanic lithosphere into continental crust. The recognition of this orogenic cycle followed by Permian–early Triassic terminal collision of the CAOB provides compelling evidence for episodic continental growth.     

Statistical analysis of sand grain/bed collision process recorded by high-speed digital camera

A high‐speed digital camera was employed to record the sand grain/bed collision process. With image processing and a statistical method, a series of parameters of the collision process were obtained. The results show that the collision process of a grain with rebounding can be represented by two parameters: the kinetic energy restitution coefficient and the collision angle. Both parameters satisfy a normal distribution, and they are dependent on one another. With an increase of the collision angle, the distribution of the kinetic energy restitution gradually reduces from a broad to a narrow range with low values. The percentage of vertical velocity restitution coefficients greater than 1 can reach 70% or more, which ensures that the settling time of the sand grains in the air increases and that they receive more energy from the air to progress the saltation movement.     

遗迹化石在层序地层学研究中的应用

以济阳坳陷古近系沙河街组和塔里木盆地志留系为例,探讨了遗迹化石与层序地层学的关系,表现在3个方面:1)层序界面的识别层序界面位置发育有特征性的受基底控制的遗迹相,且界面上下遗迹组合类型发生变化;2)准层序界面的识别较深水环境中,界面上下生物扰动强度明显差异,界面之下扰动强度较大,扰动指数可达到3,而界面之上几乎没有生物扰动,且在同一准层序内部,由下至上,扰动强度逐渐增大;3)旋回层序的识别:在潮控滨线环境中,单个准层序内部,由下至上,高能环境的Skolithos遗迹组合逐渐变为中低能环境的Planolites-Palaeophycus遗迹组合和低能环境的Cochlichnus-Planolites遗迹组合,由下至上呈现旋回性变化特征。     

软玉子料的形状规律及其应用

通过对软玉子料形状总结,发现子料多呈扁平状,其长宽比较小,磨圆好的子料形状可分为11类。这些特征可用于子料鉴别与特殊材料制作。     

碱消解-高效液相色谱-电感耦合等离子体质谱法测定生物样品中的甲基汞和乙基汞

建立了碱消解-高效液相色谱-电感耦合等离子体质谱联用系统测定生物样品中甲基汞(MeHg)与乙基汞(EtHg)的分析方法。为提高灵敏度,选用微流量的PFA雾化器,在优化的检测条件下,MeHg及EtHg检出限可达到0.036μg/L和0.03μg/L;线性范围达到4个数量级,两条工作曲线线性相关系数为1。对1.78μg/L MeHg、1.65μg/L EtHg的混合标准溶液重复测定7次,色谱峰面积的相对标准偏差(RSD)分别为1.79%和1.44%。对标准物质BCR 464(金枪鱼)的分析结果表明,测定值与标准值基本吻合,但略低于标准值;甲基汞和乙基汞的加标回收率分别为85.9%和84.5%。高效液相色谱与质谱联用技术的高灵敏度和低检出限能够满足生物样品中汞形态定量分析的要求。     

滇西北保山核桃坪铅锌矿床成矿流体来源的同位素地球化学证据

滇西北核桃坪铅锌矿是保山地块内沿澜沧江断裂带发育的一个大型铅锌多金属矿床,矿体严格受近SN向的断裂带及层间破碎带控制,赋存于上寒武统核桃坪组和沙河厂组大理岩化灰岩及矽卡岩中。文章在分析矿床地质特征的基础上,通过对V1矿体的氢、氧、碳、硫、硅和铅同位素地球化学的示踪研究,探讨了成矿溶液中水、碳、硅、硫和铅的来源以及成矿流体的演化问题。研究表明,V1矿体中矿石的石英δ18O水值变化范围为6·1‰~7·6‰,平均为6·7‰,其δDV-SMOW值变化范围为-100‰~-108‰,平均为-104‰,说明成矿流体主要来自深部岩浆分异水,并在后期成矿作用过程中有地层建造水和大气降水的加入;矿石中方解石的δ13CV-PDB和δ18O水值分别为-6·6‰~-5·9‰和5·0‰~5·2‰,反映成矿流体的碳、氧具有深部流体与围岩发生交代反应的特征。硅、硫和铅同位素具深部岩浆或地幔来源的特点,但遭受后期壳源物质的混染。据此提出该矿床是与深部岩浆热液或幔源流体贯入有关的构造热液脉型矿床,其成矿作用受控于深部过程的驱动和控制,可为指导地质找矿提供依据。     

西藏驱龙超大型斑岩铜矿床:地质、蚀变与成矿

驱龙超大型矿床是一个产于后碰撞伸展环境下、与大洋俯冲无关的新型斑岩铜矿。文章通过对驱龙铜矿床地质、蚀变与矿化的详细研究,建立了驱龙中新世岩浆演化序列,初步查明了岩浆浅成侵位的构造控制要素,厘定了主要的围岩蚀变类型及空间展布规律,查明了引起各期蚀变事件的地质记录及矿化的空间分布规律,并探讨了成矿物质沉淀的机制,初步建立了该矿床的成矿模型。研究表明,驱龙铜矿中新世斑岩是闪长质深部岩浆房不断演化的产物,花岗闪长岩中新发现的、结晶时间为22.2Ma左右的闪长质包体可近似代表深部岩浆房组分,依次产出的花岗闪长岩、呈岩株或岩枝产出的P斑岩、X斑岩及最晚期的闪长玢岩(15.7±0.2)Ma,均为深部岩浆房连续演化的产物,岩浆持续6Ma左右。岩浆演化过程中角闪石、斜长石不断的结晶分异,导致了岩石常量元素、稀土元素及微量元素组成的规律性变化,斑岩埃达克质的特征也因岩浆演化过程中角闪石等矿物的不断结晶分异而引起。X斑岩中锆石的Hf同位素特征表明,岩石可能形成于新生下地壳的部分熔融。大面积产出的花岗闪长岩为驱龙铜矿最主要的含矿围岩,容纳了驱龙矿床70%以上的矿体,主要由斜长石、钾长石和石英组成,具花岗结构-似斑状结构,近EW向产出,其浅成就位可能受背斜控制,其后的各期斑岩均沿该侵位中心上侵,而冈底斯地壳中新世的快速抬升与剥蚀是导致含矿斑岩浅成侵位的根本原因;矿区内的SN向裂隙带既不控岩,也不控矿。浅成侵位的斑岩及深部岩浆房均发生了流体出溶。发生了大量流体出溶的深部岩浆房,是矿区早期蚀变流体的主要来源,显微晶洞构造及单向固结结构(UST)是流体出溶的地质记录。蚀变主要有3种类型,分别为早期的钾硅酸盐化、青磐岩化以及晚期的长石分解。钾硅酸盐化可分为2个阶段,即蚀变矿物以次生钾长石为主的早期钾硅酸盐化和以次生黑云母为主的晚期钾硅酸盐化。青磐岩化因产出的岩石类型不同,蚀变矿物组合具有明显差异性:产于叶巴组地层中的青磐岩化相对较强,蚀变矿物以绿帘石为主;产于花岗闪长岩中的青磐岩化相对较弱,蚀变矿物以绿泥石为主。晚期长石分解蚀变以破坏长石类矿物为特征,蚀变矿物主要为绢云母-绿泥石-粘土等。石英和硬石膏贯穿于上述各种蚀变中。空间上,钾硅酸盐化位于斑岩体及其周围地区,青磐岩化位于钾硅酸岩化外侧。后期形成的长石分解蚀变强烈叠加了早期钾硅酸盐化,介于钾硅酸盐化带与青磐岩化带之间。与早期钾长石化有关的脉体主要为不规则石英-钾长石脉,与晚期黑云母化有关的脉体主要为不规则至板状的石英-硬石膏脉、黑云母脉,与青磐岩化有关的脉体主要为板状的绿帘石-石英脉,与晚期长石分解蚀变有关的脉体主要为板状黄铜矿-黄铁矿脉及黄铁矿脉;在早期钾硅酸盐蚀变与晚期长石分解蚀变转换阶段,发育一组板状的石英-硫化物脉。早期不规则的脉体形成于斑岩结晶早期、矿区裂隙小规模发育阶段;晚期的板状脉体形成于斑岩弱固结或固结之后、矿区大规模连通裂隙发育阶段。驱龙矿区的铜矿化分布较为均一,主体产于花岗闪长岩中,其中,铜矿化主体形成于黑云母化蚀变阶段,转变阶段及长石分解阶段也有大量铜的形成;钼主要形成于转换阶段,长石分解蚀变阶段也有产出。黑云母化阶段,铜的沉淀与角闪石黑云母化、斜长石钾长石化过程中Ca2 的大量释放有关;转换阶段,铜钼矿化可能与压力和(或)温度骤降有关;晚期铜矿化与长石矿化蚀变阶段,斜长石绿泥石化、黑云母绿帘石化过程中Ca2 及Fe2 的释放有关。