Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

紫外线照射剂量对九孔鲍胚胎及幼虫的影响

采用不同的紫外线照射剂量的海水诱导九孔鲍产卵,观察其对卵子的受精率、畸形率和孵化率的影响.紫外线照射剂量的配制方法是:用紫外线照射过的最大剂量的海水与新鲜海水混合配制出各种剂量的海水.实验把雌亲鲍分成7组,每组20只,分别用紫外线照射剂量为0(对照组)、450、600、750、900、1 050和1 200mW.h/dm3的海水进行刺激产卵.试验重复3次.结果表明,紫外线照射剂量在1 200mW.h/dm3以内,对卵子的受精率影响不大;紫外线照射剂量在750mW.h/dm3以内,对卵子的畸形率影响不大,但在900~1 200mW.h/dm3,对卵子的畸形率影响很大;紫外线照射剂量在600mW.h/dm3以内,对卵子的孵化率没有什么影响,但在750~1 200mW.h/dm3,对卵子的孵化率影响很大.综合考虑卵子的受精率、畸形率和孵化率,九孔鲍催产的适宜的紫外线照射剂量应为450~750mW.h/dm3.     

南海及周边部分地区特提斯构造遗迹:问题与思考

对全球二叠纪－三叠纪古气候特征的研究表明，东特提斯地区晚三叠世古气候标志具有带状分布的特征。北巴拉望地块卡拉棉群岛科龙岛的晚三叠世沉积中发育反映较干燥古气候特征的鲕状灰岩，因此在古气候特征方面，北巴拉望地块晚三叠世地层不能与华南和印支地块同期地层对比，而应该与印度地块北缘喜马拉雅地区（向西）和琉球群岛（向东）对比。根据该古气候分析，北巴拉望地块在晚三叠世时应该位于南部亚热带较干燥气候带内，其晚三叠世的古地理位置比印支地块更靠南。对南海及南海周边部分地特提斯构造遗迹的研究，将有助于深入了解南海北部陆缘区相关构造带的性质及正确恢复南海扩张之前该区的地质发展历史。南海北部陆缘区也是研究解决特提斯构造向东延伸问题以及特提斯构造－太平洋构造时空转化问题的关键地区。     

大黄鱼病原弧菌拮抗放线菌的筛选与人工诱变

从厦门集美海滩底泥分离得到38株放线菌，用琼脂块法测定它们对大黄鱼病原弧菌-溶藻弧菌和副溶血弧菌的拮抗效果，选择两株拮抗效果较好的放线菌进行诱变，测定诱变后各菌株的抗菌效果，并选择抗菌效果较好的菌株进行第二次诱变，如此反复诱变3次，共得到97株放线菌，结果表明；38株放线菌中的22株对两株病原菌有一定的拮抗作用；用紫外线照射可以获得少量对两株病原菌拮抗作用加强的菌株。     

Wave-Current Forces on Small Square Cylinders (Part I)

-Based on the extended Morison Equation and model tests, the in-line forces on small square cylinders caused by waves (regular and irregular) and currents are analyzed in detail in this paper. The hydrodynamic coefficient CD and Cu related to KC number and the effect of direction of wave incidence are also given, which can be used in engineering practice.     

Model Test of Sand Restraining Force on Pipeline

This paper describes the model tests for determining the axial friction and the lateral resistance of sand to pipeline by using fine sand and prototype pipeline, and the calculation method based on limit analysis theory is verified. The effect of cyclic loading is considered in the test.     

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.     

Dynamic Analysis of a Single-Column Platform (II)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Wave-Current Forces on Slender Circular Cylinders

- A series model tests of wave forces by both regular and irregular waves combined with currents on single piles and bipiles in tandem and parallel arrays have been carried out. Based on Morison Equation, linear wave theory and linear wave spectrum theory as well, the characteristics of inline, lift and resultant forces on cylinders have been analyzed respectively. The drag, inertia and lift coefficients CD, CM and CL f皉 single piles related to KC number and the grouping effect coefficients of inline, lift and resultant forces on bipiles in tandem and parallel arrays related to KC number are given in this paper.