The pegmatites of the Nova Era–Itabira–Ferros pegmatite district and the emerald mineralisation of Capoeirana and Belmont (Minas Gerais, Brazil): geochemistry and Rb–Sr dating

The chemical composition and Rb–Sr ages of mica, feldspar, and whole rock samples from the emerald mineralisation of Capoeirana and Belmont, from emerald-barren pegmatites and of the Borrachudos granitic gneiss, Monlevade banded and granitic gneisses from the area of Nova Era–Itabira–Ferros (Minas Gerais, Brazil) as well as from the Guanhães gneiss (Minas Gerais, Brazil) have been determined. The Borrachudos granitic and Monlevade banded gneiss with connected pegmatitic schlieren and pegmatite veins, as well as the Guanhães gneiss, got their actual textures and mineralogical composition at about 1.9 Ga in the context of the Transamazonic tectonothermal event.The Monlevade banded gneiss belongs to a volcano-metasedimentary greenstone belt sequence, which is the typical country rock of the emerald occurrences. The main emerald-forming event at Belmont and Capoeirana was a metasomatic reaction of Be-rich anatectic pegmatites with Cr-rich ultrabasic rocks during the Transamazonic event. At Capoeirana, K–feldspar-bearing Be-rich pegmatites were transformed during the emerald-forming process into plagioclase–quartz rocks. Rb–Sr ages on biotite of about 480 Ma from the emerald mineralisation result from the rejuvenation of Transamazonic biotite by the Brasiliano event.The widespread macroscopically unmetamorphosed pegmatites of the study area formed in the Brasiliano event at 477±14 Ma. These pegmatites resulted to be emerald-barren although the differentiation degree, as given by diagrams such as Cs vs. K/Rb for muscovite and K–feldspar, starts from ceramic and ends with Be pegmatites. Some pegmatites display a marked internal differentiation.

Abstract

Foram determinadas as composições químicas e as idades Rb–Sr de mica branca, feldspato potássico e de rochas totais das mineralizações de esmeraldas de Capoeirana e Belmont, de pegmatitos sem esmeraldas e dos gnaisses Borrachudos, Monlevade e Guanhães da região de Nova Era–Itabira–Ferros (Minas Gerais, Brazil). Os gnaisses graníticos Borrachudos, os gnaisses bandados Monlevade, seus respectivos pegmatitos e veios/schlieren pegmatóides, e os gnaisses Guanhães, adquiriram suas texturas e composições mineralógicas atuais há cerca de 1.9 Ga no contexto do evento Transamazônico.As rochas regionais encaixantes típicas das ocorrências de esmeraldas são os gnaisses Monlevade que pertencem a uma sequência metavulcano-sedimentar de tipo greenstone belt. O evento principal de formação de esmeraldas em Belmont e Capoeirana foi uma reação metassomática dos pegmatitos anatéticos ricos em Be com rochas ultrabásicas ricas em Cr durante o evento Transamazônico em torno de 1.9 Ga. Em Capoeirana nesse contexto os pegmatitos com feldspato potássico ricos em Be foram transformados em rochas de plagioclasio–quartzo. As idades Rb–Sr de cerca de 480 Ma de minerais das mineralizações de esmeralda resultaram da reequilibração de biotitas e feldspatos Transamazônicos durante o evento Brasiliano.Os pegmatitos não-metamórficos e sem esmeralda da região estudada foram formados no evento Brasiliano há 477±14 Ma. O grau de diferenciação dos pegmatitos, estudado em diagramas indicadores específicos como por exemplo Cs vs. K/Rb de micas brancas e feldspatos potássicos, varia desde pegmatitos cerámicos até muscovita-pegmatitos, à pegmatitos de metais raros e até berilíferos. Alguns dos pegmatitos apresentam marcante diferenciação interna.     

A combinatorial data model for representing topological relations among 3D geographical features in micro‐spatial environments

This research is motivated by the need for 3D GIS data models that allow for 3D spatial query, analysis and visualization of the subunits and internal network structure of ‘micro‐spatial environments’ (the 3D spatial structure within buildings). It explores a new way of representing the topological relationships among 3D geographical features such as buildings and their internal partitions or subunits. The 3D topological data model is called the combinatorial data model (CDM). It is a logical data model that simplifies and abstracts the complex topological relationships among 3D features through a hierarchical network structure called the node‐relation structure (NRS). This logical network structure is abstracted by using the property of Poincaré duality. It is modelled and presented in the paper using graph‐theoretic formalisms. The model was implemented with real data for evaluating its effectiveness for performing 3D spatial queries and visualization.     

Occurrence and characteristics of sporadic sodium layer observed by lidar at a mid-latitude location

Na lidar observations of SSL during the past 5 years at a mid-latitude location (Wuhan, China, 31°N, 114°E) are reported in this paper. From 26 SSL events detected in about 230 h of observation, an SSL occurrence rate of 1 event/9 h at our location was obtained. This result, combined with that reported by Nagasawa and Abo (Geophys. Res. Lett. 22 (1995) 263) at Tokyo, Japan, reveals that the SSL occurrence can be relatively frequent at some mid-latitude locations. The statistical analyses of main parameters for the 26 SSL events were made, and the results were compared with those previously reported. By examining the corresponding data from a nearby ionosonde, it was found that there was a fairly good correlation between SSL and Es. Of the 18 pairs of SSL and Es events checked, 15 of SSL were accompanied by Es, and 8 pairs of them were correlated within 1 h in time and within 5 km in altitude. From the analyses of observed perturbations during SSL development, the role of dynamic processes of atmosphere in the SSL formations were emphasized.     

Coastal sea level variability in the US West Coast Ocean Forecast System (WCOFS)

Sea level variability along the US West Coast is analyzed using multi-year time series records from tide gauges and a high-resolution regional ocean model, the base of the West Coast Ocean Forecast System (WCOFS). One of the metrics utilized is the frequency of occurrences when model prediction is within 0.15 m from the observed sea level, F. A target level of F?=?90% is set by an operational agency. A combination of the tidal sea level from a shallow water inverse model, inverted barometer (IB) term computed using surface air pressure from a mesoscale atmospheric model, and low-pass filtered sea level from WCOFS representing the effect of coastal ocean dynamics (DYN) provides the most straightforward approach to reaching levels F>80%. The IB and DYN components each add between 5 and 15% to F. Given the importance of the DYN term bringing F closer to the operational requirement and its role as an indicator of the coastal ocean processes on scales from days to interannual, additional verification of the WCOFS subtidal sea level is provided in terms of the model-data correlation, standard deviation of the band-pass filtered (2–60 days) time series, the annual cycle amplitude, and alongshore sea level coherence in the range of 5–120-day periods. Model-data correlation in sea level increases from south to north along the US coast. The rms amplitude of model sea level variability in the 2–60-day band and its annual amplitude are weaker than observed north of 42 N, in the Pacific Northwest (PNW) coast region. The alongshore coherence amplitude and phase patterns are similar in the model and observations. Availability of the multi-year model solution allows computation and analysis of spatial maps of the coherence amplitude. For a reference location in the Southern California Bight, relatively short-period sea level motions (near 10 days) are incoherent with those north of the Santa Barbara Channel (in part, due to coastal trapped wave scattering and/or dissipation). At a range of periods around 60 days, the coastal sea level in Southern California is coherent with the sea surface height (SSH) variability over the shelf break in Oregon, Washington, and British Columbia, more than with the coastal SSH at the same latitudes.     

Finite element analysis for a finite conductivity fracture in an infinite poroelastic medium

In the technology of oil recovery, oil production rate can be increased by generation of a vertical conductive fracture adjacent to the well-bore. In this paper the seepage flow and isothermal deformation in both the oil formation and the fracture are studied by modelling the formation as a two-dimensional infinite poroelastic medium and the conductive fracture as a one-dimensional poroelastic material, saturated by a one-phase compressible fluid. The plane strain condition is employed. Solutions for a growing conductive fracture and a stationary conductive fracture in the infinite medium are obtained by means of the finite element method based on a variational principle for the formation which can impose the governing equations of the fracture. Infinite elements are used outside the finite element domain. Numerical results indicate that the injection rate, the applied pressure and the crack mouth opening displacement at the well-bore oscillate during the propagation of the conductive fracture. The production rate of a well with the conductive fracture is compared with that of a well without the conductive fracture. Finally, a new definition of the conductivity coefficient for the conductive fracture is presented. Copyright © 1999 John Wiley & Sons, Ltd.     

Tracing origins of sewage and organic matter using dissolved sterols in Masan and Haengam Bay,Korea

Masan and Haengam Bays in Korea are highly polluted and semi-enclosed. Domestic and industrial effluents are directly or indirectly discharged into the bays through sewage treatment plants (STP) and creeks. In this study, 15 dissolved sterol compounds were determined in order to understand their sources and relative contribution. Freshwater samples were taken from 13 creeks and at two STP sites on a monthly basis. Total dissolved sterol concentrations ranged from 993 to 4158 ng/L. The concentrations of sterols in winter were higher than in summer. Among the sterols analyzed, cholesterol, β-sitosterol, coprostanol and cholestanone were major compounds in creek water. Seawater samples were concurrently collected at 21 stations in Masan Bay. Total sterol concentrations ranged 118–6,956 ng/L. Inner bay showed high concentrations of sterols in summer, while outer bay showed high sterol concentrations in winter. Among the sterols, cholesterol, β-sitosterol and brassicasterol were major compounds in seawater. In order to examine the contribution of urban sewage, the concentration of coprostanol and fecal sterol ratios were calculated. Most of the creek water, inner bay and near STP outlet samples were affected by sewage. Terrestrial organic matters accounted for a high proportion of dissolved organic matter origin. Fecal origins were relatively high in the inner bay areas and in the STP outlet, while sterols of marine origin were high in the outer bay areas.     

On the sampling of airborne measurements of radiative properties of cloud fields: Results from International Cirrus Experiment (ICE), 1987

Summary During the first pilot phase of the International Cirrus Experiment (ICE) in September/October 1987 radiation measurements were carried out above and below broken cloud fields over the German Bight. Analyses of the measurements of 25.9.1987 (broken cumulus cloud field) showed an unexpected high absorption of solar radiation but not those of 28.9.1987 (stratocumulus/stratus cloud field). This might be explained by a partial negligence of cloud side factor under the viewing geometry of the pyranometer and other reasons. The light guide effect (leakage) within holes can account for the depletion of cloud reflectance and the enhancement of cloud transmittance at large cloud cover, as observed during the measurements on 28.9.1987. The fluctuation of the irradiances, which can be characterized by the intermittency parameter, has been related to the corresponding cloud cover by a regression equation. On the condition of similarity, this scaling parameter derived from sample measurements could be extrapolated to that of the whole cloud field. Thus, the estimation of the irradiance spectrum for the whole cloud field may be possible, from samples taken with aircraft and imaging data.With 5 Figures     

Impacts of land use change and groundwater management on long-term nitrate-nitrogen and chloride trends in groundwater of Jeju Island,Korea

Impacts of land use changes and groundwater management actions on groundwater quality were evaluated at the island scale with spatiotemporal trends of NO₃-N and Cl concentrations in groundwater of Jeju Island, Korea. The temporal trends from 1993 to 2012 in the concentrations of NO₃-N and Cl from more than 3900 wells were estimated using the Mann–Kendall trend test and Sen’s slope analysis and compared with the land use change trend for the period 1995–2009. The results indicate that the upward trends in NO₃-N were associated with the expansion of agricultural lands, whereas Cl trends were considered to be affected by other factors in addition to the land use changes. In the mid-mountainous region, the deterioration in the groundwater quality by the both NO₃-N and Cl was expected due to the continuous expansion of agricultural lands. In the lowland area, the NO₃-N and Cl components showed different trends depending on the regions. In the eastern area, increasing trends in NO₃-N were observed due to the development of new agricultural areas, while the Cl concentration was observed to decrease as a result of the regulation on groundwater extraction to reduce seawater intrusion. Our study highlights that a comprehensive interpretation of trends in NO₃-N and Cl and land use changes for long-term periods can provide useful insights to prepare for suitable groundwater management plans in the whole island perspective.     

An examination of the validation of a model of the hydro/thermo/mechanical behaviour of engineered clay barriers

This paper focuses attention on the development of a numerical model of the hydro/thermo/mechanical behaviour of unsaturated clay and its consequent verification and validation. The work presented describes on-going collaboration between the Cardiff School of Engineering and Atomic Energy of Canada. The model development, which was carried out at Cardiff, can be described as being based on a mechanistic approach to coupled heat, moisture and air flow. This is then linked to a deformation analysis of the material within a ‘consolidation’ type of model. The whole is solved via the finite element method to yield a computer software code named COMPASS (COde for Modelling PArtly Saturated Soil). Some aspects of verification and validation of the model have been addressed in-house. However, the purpose of current AECL work is to provide an independent, rigorous, structured programme of validation and the paper will also explore the further validation of COMPASS within this context. © 1998 by John Wiley & Sons, Ltd.     

Microbial communities in the deep subsurface

The diversity of microbial populations and microbial communities within the earth's subsurface is summarized in this review. Scientists are currently exploring the subsurface and addressing questions of microbial diversity, the interactions among microorganisms, and mechanisms for maintenance of subsurface microbial communities. Heterotrophic anaerobic microbial communities exist in relatively permeable sandstone or sandy sediments, located adjacent to organic-rich deposits. These microorganisms appear to be maintained by the consumption of organic compounds derived from adjacent deposits. Sources of organic material serving as electron donors include lignite-rich Eocene sediments beneath the Texas coastal plain, organic-rich Cretaceous shales from the southwestern US, as well as Cretaceous clays containing organic materials and fermentative bacteria from the Atlantic Coastal Plain. Additionally, highly diverse microbial communities occur in regions where a source of organic matter is not apparent but where igneous rock is present. Examples include the basalt-rich subsurface of the Columbia River valley and the granitic subsurface regions of Sweden and Canada. These subsurface microbial communities appear to be maintained by the action of lithotrophic bacteria growing on H₂ that is chemically generated within the subsurface. Other deep-dwelling microbial communities exist within the deep sediments of oceans. These systems often rely on anaerobic metabolism and sulfate reduction. Microbial colonization extends to the depths below which high temperatures limit the ability of microbes to survive. Energy sources for the organisms living in the oceanic subsurface may originate as oceanic sedimentary deposits. In this review, each of these microbial communities is discussed in detail with specific reference to their energy sources, their observed growth patterns, and their diverse composition. This information is critical to develop further understanding of subsurface geochemical processes and to develop new approaches to subsurface remediation. Résumé La diversité des populations et des communautés microbiennes dans le sol et le sous-sol est présentée dans cet article. Les chercheurs s'interrogent fréquemment sur la diversité microbienne du sous-sol, sur les interactions entre organismes et sur les mécanismes qui permettent le maintien des communautés microbiennes souterraines. Il existe des communautés microbiennes anérobies hétérotrophes dans des grès ou dans des sédiments sableux relativement perméables, à proximité de dépôts riches en matières organiques. Ces micro-organismes semblent se maintenir grâce à la consommation de composés organiques provenant des dépôts organiques voisins. Les sources de matériel organique jouant le rôle de donneur d'électrons sont constituées par des sédiments éocènes riches en lignite situés sous la plaine littorale du Texas, les schistes riches en matières organiques du Crétacé du sud-ouest des États-Unis, ainsi que les argiles contenant des matériaux organiques et des bactéries de fermentation de la plaine littorale atlantique. En outre, il existe des communautés fortement diversifiées dans des régions où aucune source de matière organique n'existe, mais où sont présentes des roches ignées. Le sous-sol riche en basalte de la vallée de la Columbia au Canada et les régions granitiques de Suède en sont des exemples. Ces communautés microbiennes souterraines semblent se maintenir par l'action de bactéries lithotrophes se développant grâce à l'hydrogène qui est produit par réactions chimiques dans le sous-sol. Il existe d'autres communautés microbiennes de profondeur dans les sédiments profonds des océans. Ces systèmes sont souvent associés à un métabolisme anérobie et à une réduction des sulfates. La colonisation microbienne s'étend jusqu'à des profondeurs où les températures élevées limitent leur capacité de survie. Les sources d'énergie pour ces organismes vivant dans les fonds des océans peuvent être les dépôts sédimentaires océaniques. Dans cette revue, chacune des communautés microbiennes est discutée en détail en se référant spécifiquement à leurs sources d'énergie, au schéma observé de leur développement et à leur composition diversifiée. Cette information est donnée de façon critique dans le but d'améliorer la compréhension des processus géochimiques intervenant dans le sous-sol et de développer de nouvelles approches pour la dépollution souterraine. Resumen En este artículo se resume la diversidad de las poblaciones y comunidades microbianas en el subsuelo. A partir de exploraciones realizadas en el subsuelo, los científicos se están cuestionando en la actualidad aspectos relativos a la diversidad microbiana, las interacciones entre los distintos microorganismos y los mecanismos para el mantenimiento de las comunidades de microbios. Se ha comprobado la presencia de comunidades microbianas anaerobias y heterótrofas en areniscas relativamente permeables y en sedimentos arenosos ubicados cerca de depósitos ricos en materia orgánica, de la cual se alimentan. Algunas fuentes de material orgánico, que actúan como donantes de electrones, son: sedimentos del Eoceno ricos en lignito, bajo la planicie costera de Texas; pizarras del Cretácico ricas en materia orgánica, al sudoeste del país; y arcillas cretácicas con materia orgánica y bacterias fermentativas, en la llanura Atlántica. También existen comunidades microbianas de gran diversidad en rocas ígneas, aunque la fuente de materia orgánica no es tan evidente. Algunos ejemplos son la subsuperficie del valle del Río Columbia, rico en basaltos, y las regiones graníticas de Suecia y Canadá. Estas comunidades microbianas subsuperficiales se mantienen por la acción de bacterias litotrópicas, que crecen en ambiente de H₂, generado en la subsuperficie. También existen comunidades microbianas a gran profundidad, como por ejemplo en los sedimentos oceánicos. Estos sistemas subsisten con un metabolismo anaerobio en un ambiente sulfato-reductor. La colonización microbiana se extiende hasta profundidades tales que las altas temperaturas limitan su supervivencia. Las fuentes de energía para estos organismos pueden ser los depósitos sedimentarios oceánicos. En este artículo se discute cada una de estas comunidades en detalle, en particular sus fuentes de energía, su esquema de crecimiento y la diversidad de su composición. Esta información es de gran interés para permitir un mayor entendimiento de los procesos geoquímicos en profundidad y para desarrollar nuevos métodos de rehabilitación.