CO<Subscript>2</Subscript>-assisted removal of nutrients from municipal wastewater by microalgae <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Scenedesmus obliquus</Emphasis>

Axenic culture of microalgae Chlorella vulgaris ATCC^® 13482 and Scenedesmus obliquus FACHB 417 was used for phycoremediation of primary municipal wastewater. The main aim of this study was to measure the effects of normal air and CO₂-augmented air on the removal efficacy of nutrients (ammonia N and phosphate P) from municipal wastewater by the two microalgae. Batch experiments were carried out in cylindrical glass bottles of 1 L working volume at 25 °C and cool fluorescent light of 6500 lux maintaining 14/10 h of light/dark cycle with normal air supplied at 0.2 L min^?1 per liter of the liquid for both algal strains for the experimental period. In the next set of experiments, the treatment process was enhanced by using 1, 2 and 5% CO₂/air (vol./vol.) supply into microalgal cultures. The enrichment of inlet air with CO₂ was found to be beneficial. The maximum removal of 76.3 and 76% COD, 94.2 and 92.6% ammonia, and 94.8 and 93.1% phosphate after a period of 10 days was reported for C. vulgaris and S. obliquus, respectively, with 5% CO₂/air supply. Comparing the two microalgae, maximum removal rates of ammonia and phosphate by C. vulgaris were 4.12 and 1.75 mg L^?1 day^?1, respectively, at 5% CO₂/air supply. From kinetic study data, it was found that the specific rates of phosphate utilization (q _phsophate) by C. vulgaris and S. obliquus at 5% CO₂/air supply were 1.98 and 2.11 day^?1, respectively. Scale-up estimation of a reactor removing phosphate (the criteria pollutant) from 50 MLD wastewater influent was also done.     

Eco-friendly smart hydrogels for soil conditioning and sustain release fertilizer

In the agricultural industry, biomass waste generated along with the production of food, is transformed into value-added products. Also, the demand for the slow or control release fertilizer is increasing to reduce the cost of maintaining the agricultural land. These issues are tackled by converting biomass waste to a slow fertilizer release vehicle and biodegradable water retention material that could reduce the cost for fertilizer application and simultaneously preserved the soil from dryness. A series of carboxymethyl sago pulp (CMSP) hydrogels were prepared by electron beam irradiation. Slow release systems were evaluated by loading potassium nitrate (KNO₃) and ammonium nitrate (NH₄NO₃) into the CMSP hydrogels. These CMSP hydrogels endow slow release property, biodegradability and a soil moisture preservation property that could find greener application in agricultural industries. The results indicate that CMSP hydrogels have a great potential as an agent for slow release of fertilizers.     

Photodegradation of dimethyl phthalate (DMP) by UV–TiO<Subscript>2</Subscript> in aqueous solution: operational parameters and kinetic analysis

In this paper, the adsorption and degradation phenomenon involved in the photocatalytic degradation of dimethyl phthalates (DMPs) by titanium dioxide (TiO₂) was studied. A variety of operating variables were selected firstly. Then, it was proved that even for such weak adsorption properties molecules as DMP, adsorption was still an important prerequisite for photolysis. A surface-mediated reaction process was proposed that the photodegradation of DMP assisted by TiO₂ particles occurred primarily at the surface of the photocatalyst rather than in the homogeneous phase. According to Langmuir–Hinshelwood model, the adsorption constant determined from the dark adsorption was far less than that obtained in the light condition. Enhanced DMP adsorption on the surface of TiO₂ under irradiation was the possible reason for the improvement of photodegradation efficiency. Under the irradiation of light, a synergistic mechanism of adsorption and photocatalysis was responsible for DMP degradation. The quantitative analysis by adding scavengers indicated that ^·OH radical was primarily responsible for the photodegradation of DMP. It was further verified that ^·OH was produced much more from conduction band electrons rather than valance band holes toward photodegradation of DMP by adding foreign Cu²⁺.     

Preservation of thermophilic mixed culture for anaerobic palm oil mill effluent treatment by convective drying methods

The generation of huge amount of liquid waste known as palm oil mill effluent is a major problem in oil palm industry. Meanwhile, anaerobic biodegradation of such organic effluent at thermophilic condition is a promising treatment technology due to its high efficiency. However, storage and transportation of thermophilic mixed culture sludge are challenging due to constant biogas generation and heating requirement. Hence, drying of thermophilic sludge was conducted to obtain dormant thermophiles and thus enables easier handling. In this study, thermophilic sludge was dried using heat pump at 22 and 32 °C as well as hot air oven at 40, 50, 60, and 70 °C. Subsequently, quality of dried sludge was examined based on most probable number enumeration, chemical oxygen demand, and methane yield. Average drying rate was found to increase from 3.21 to 17.84 g H₂O/m² min as drying temperatures increases while average moisture diffusivity values ranges from 5.07 × 10^?9 to 4.34 × 10^?8 m²/s. Oven drying of thermophilic mixed culture resulted in highest chemical oxygen demand removal and lowest log reduction of anaerobes at 53.41% and 2.16, respectively, while heat pump drying resulted in the highest methane yield and lowest log reduction of methanogens at 53.4 ml CH₄/g COD and 2.09, respectively. To conclude, heat pump at 22 °C was most suitable drying technique for thermophilic mixed culture as the original methane-producing capability was largely retained after drying, at a slightly lower yet still comparable chemical oxygen demand removal when palm oil mill effluent was treated with the rehydrated culture.     

Soil wettability in ground engineering: fundamentals,methods, and applications

Wettability is a fundamental property controlling the extent of wetting in flat and granular solids. In natural soils, wettability affects a wide variety of processes including infiltration, preferential flow and surface runoff. In mineral processing, wettability is paramount in enhancing the efficiency of separation of minerals from gangue. The manipulation of surface wettability is equally crucial in many industrial applications. For instance, superhydrophobic surfaces are those on which water drops roll off easily and as such are used for self-cleaning applications. Therefore, while wettability is strongly cross-disciplinary, its evolution has been discipline-specific with a direct extrapolation or transfer of concepts, approaches, and methods to ground engineering unlikely to remain valid. This paper synthesizes relevant aspects from surface chemistry, materials science, mining engineering, and soil science, and discusses their implications within the context of new granular materials that resist wetting, for use in barriers or ground improvement and, in unsaturated soils, where the effects of wettability have been documented.     

Hydro-thermal coupled analysis for health monitoring of embankment dams

Measuring and analyzing internal dam temperature may provide insight into evaluating the integrity of earthen dams. Temperature in a dam, with the advent of modern distributed temperature sensing (DTS) technique, is conveniently measured. The analysis of the temperature is conducted based on a hydro-thermal coupled analysis technique. In this study, DTS-based temperature data and VS2DHI (a finite difference code for analyzing two-dimensional heat transport in porous media) were used to analyze the hydro-thermal coupled behavior in a dam. The results of this analysis show that the temperature variation in an earthen dam is closely related to seepage conditions. Additionally, a localized high-temperature (26 °C) zone found in the measured data of the dam, which raised concern to engineers on site, is explained through either hot water infiltration into the foundation layer or lower permeability of the foundation layer than the magnitude that appeared in the design document. These findings demonstrate that hydro-thermal coupled analysis has the potential for evaluating the integrity of earthen dams.     

Developing a seismic source model for the Arabian Plate

A seismic source model is developed for the entire Arabian Plate, which has been affected by a number of earthquakes in the past and in recent times. Delineation and characterization of the sources responsible for these seismic activities are crucial inputs for any seismic hazard study. Available earthquake data and installation of local seismic networks in most of the Arabian Plate countries made it feasible to delineate the seismic sources that have a hazardous potential on the region. Boundaries of the seismic zones are essentially identified based upon the seismicity, available data on active faults and their potential to generate effective earthquakes, prevailing focal mechanism, available geophysical maps, and the volcanic activity in the Arabian Shield. Variations in the characteristics given by the above datasets provide the bases for delineating individual seismic zones. The present model consists of 57 seismic zones extending along the Makran Subduction Zone, Zagros Fold-Thrust Belt, Eastern Anatolian Fault, Aqaba-Dead Sea Fault, Red Sea, Gulf of Aden, Owen Fracture Zone, Arabian Intraplate, and a background seismic zone, which models the floating seismicity that is unrelated to any of the distinctly identified seismic zones. The features of the newly developed model make the seismic hazard results likely be more realistic.     

The measurement of soil gases and shallow temperature for determination of active faults in a geothermal area: a case study from Ömer–Gecek,Afyonkarahisar (West Anatolia)

Afyonkarahisar is a very important geothermal province of western Anatolia and has low and medium enthalpy geothermal areas. This study has been carried out for the preparation of distribution maps of soil gases (radon and carbon dioxide) and shallow soil temperature and the exploration of permeable tectonic regions associated with geothermal systems and reveal the origins of radon and carbon dioxide gases. The western district of the study area is characterized by the high radon concentration (168.30 kBq/m³), carbon dioxide ratio (0.30%), and soil temperature (21.0 °C) values. Fethibey and Demirçevre faults, which allow the circulation of geothermal fluids, have been detected in the distribution maps of radon, carbon dioxide, and shallow depth temperature and the directions of the curves in these maps correspond to the strikes of Demirçevre faults. The effect of the fault plays an important role in the change of carbon dioxide concentration along the W-E directional geological section prepared to determine the change of soil gas and shallow depth temperature values depending on lithological differences, fault existence, and geothermal reservoir depth. On the other hand, it was determined that Rn²²² concentration and soil temperature changed as a function of geothermal reservoir depth or lithological difference. Tuffs in Köprülü volcano-sedimentary units are the main source of radon due to their higher uranium contents. Besides, the carbon dioxide in Ömer–Gecek soils has geothermal origin because of the highest carbon dioxide content (99.3%) in non-condense gas. The similarities in patterns of soil temperature, radon, and carbon dioxide indicate that the variation in soil temperatures is related to radon and carbon dioxide emissions. It is concluded that soil gas and temperature measurements can be used to determine the active faults in the initial stage of geothermal exploration successfully.     

Petrophysical characterisation of tight sandstone gas reservoirs using nuclear magnetic resonance: a case study of the upper Paleozoic strata in the Kangning area,eastern margin of the Ordos Basin,China

Residual and movable porosity are significant parameters for characterising petrophysical properties, especially in tight reservoirs. Eight tight sandstone samples from the upper Paleozoic gas-bearing strata in the Kangning area, from the eastern margin of the Ordos Basin, were analysed using nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), petrography, and porosity and permeability tests. The lithology and pore types were identified and classified using petrography and SEM. The residual and movable porosity were obtained with NMR. In addition, NMR was used to visualise pore structure and pore size distribution. The results suggest that the upper Paleozoic sandstones in the study area mainly comprise feldspathic litharenite and litharenite. The sandstone porosity and permeability are low, with means of 5.9% and 0.549 mD, respectively. Four pore types exist in the tight sandstones: residual primary pores, grain dissolution pores, micropores (clay-dominated) and microfractures. The T₂ spectra under water-saturated conditions correlate with pore size and can be used to distinguish small and large pores based on the transverse relaxation time cutoff value of 10 ms, which corresponds to a pore diameter of 0.232 μm. Small pores account for 72% of the pores in the tight sandstones. The continuous bimodal T₂ spectra suggest good connectivity between small and large pores, despite the low porosity and permeability. In this study, the movable porosity of the major tight sandstone gas reservoirs is higher than the residual porosity, which confirms the effective evaluation of movable porosity to tight sandstone reservoirs, based on NMR experiments.     

N and C Isotopic Compositions of the Lower Triassic of Southern Primorye and Reconstruction of the Habitat Conditions of Marine Organisms

N and C isotopic data are recorded and presented for the first time for the Lower Triassic claystones of Southern Primorye (Abrek Section). Five N isotope intervals and 11 more or less pronounced negative C isotope excursions, likely to reflect instability of the temperature regime and the oceanographic situation in the Early Triassic, are recognized in the section. The most favorable conditions for ammonoid recovery and other marine organisms in the Early Triassic (after the end- Permian ecological crisis) were associated with the late Induan—early Olenekian transgression and probable cooling.