Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.     

Kinetic mechanism of competitive adsorption of disperse dye and anionic dye on fly ash

The adsorption behavior of four anionic dyes and one disperse dye in single solution and binary solutions on fly ash was investigated in order to elucidate the effect of competitive adsorption on the kinetics. The experimental findings showed that adsorption equilibriums of four anionic dyes were reached within 50 min either in the single solution or in binary mixtures. Competitive adsorption increased the time of attaining equilibrium of disperse dye. Desorption of dyes suggested the predominant adsorption mechanisms, that is, chemisorption for anionic dyes and physisorption for disperse dye. For the binary mixtures, the anionic dyes could be adsorbed preferentially on fly ash at the first stage. Second-order kinetic models fitted better to the equilibrium data of all dyes in the single solution as well as in the binary mixtures. The maximum rate constant of intraparticle diffusion and the minimum external mass transfer coefficient was found for disperse dye both in single and in binary solutions. The intraparticle diffusion constants and external mass transfer coefficients of the four anionic dyes in binary solution are similar to those obtained in single solution. The Biot number confirmed that the intraparticle diffusion was the rate-limiting step in the dye sorption process.     

Tectonics of the Dabieshan (eastern China) and possible exhumation mechanism of ultra high-pressure rocks

The Dabieshan is divided into three tectonic domains. The Southern Dabieshan is a stack of allochtons, from top to bottom: (i) unmetamorphosed Cambrian–Early Triassic series unconformably covered by Jurassic sandstone; (ii) weakly metamorphosed Proterozoic slate; (iii) HP rocks mostly retrogressed into greenschist facies; (iv) UHP allochton; (v) UHP-free gneisses. These units exhibit a NW–SE lineation and top-to-the-NW shearing reworked by S-verging folds. The Central Dabieshan is a migmatitic dome superimposed on UHP metamorphism and bounded by a detachement fault responsible for the exhumation of the UHP unit during its retrogression into amphibolite facies. In the Northern Dabieshan, early foliation and N–S trending compressional lineation are deformed by N-verging folds coeval to the syn-exhumation ductile structures of the Central Dabieshan. A geodynamic model involving coeval thrusting and normal faulting is discussed.     

Effects of low- to high-angle normal faults on sedimentary architectures in the Eocene Wenchang Formation,Enping Sag,Pearl River Mouth Basin,South China Sea

The effects of low- to high-angle (>30°) normal faults on sedimentary architectural units in the Eocene Wenchang Formation, Enping Sag, Pearl River Mouth Basin (PRMB), South China Sea were investigated utilising a high-quality 3D seismic data set and restored paleogeomorphology. It has been shown that sequence stratigraphic units and sedimentary architecture are significantly controlled by the low- to high-angle normal faults. The Wenchang Formation, a second-order sequence, can be subdivided into two para-second-sequences (the Lower and Upper Wenchang sequences, E₂W^L and E₂W^U) and seven third-order sequences (from base to top: SQ1～SQ7). The low-angle fault confined sequence architecture of the Wenchang Formation is mainly characterised by lateral stacking with the ratio of the vertical subsidence (V) to horizontal slip (H) being reduced from 1/2 for E₂W^L to 1/6 for E₂W^U. In contrast, the high-angle fault confined sequence is characterised by vertical stacking with the ratio of V/H close to 1 for sequences SQ1 to SQ7. In the 3D seismic area, the features of sediment-dispersal pattern were interpreted based on an integrated analysis of paleogeomorphology, seismic reflection characteristics, stratal thickness distribution and multiple attribute clustering. The results show that the large-scale fan delta, belt-shape lacustrine deposit and bird-foot braided delta systems mainly developed in the low-angle fault confined sequences, whereas small-scale fan delta, rhombus-shaped lacustrine deposit and lobe-shaped braided delta systems inherited tectono-sedimentary architectures in the high-angle fault confined sequences.     

Tracing the source of metals in Geogas from metal deposits in a loess-covered region北大核心CSCD

In order to test the distribution characteristics of metallogenic elements and the application effectiveness of the traee elements and REE for tracing the source of Geogas anomaly, the distribution characteristics of metallogenetic elements .trace elements and REE in different media of the Jiaolongzhang Pb-Zn deposit underneath the loess have been studied in this paper. Results indicate that the distribution characteristics of Geogas anomalous elements over the concealed orebodies are coincided with those of the enriched elements of ores, while the distribution characteristics of trace elements and REE in background Geogas samples are distinctly different from those of other media, indicating that the source of background Geogas materials is influenced by various factors( geological bodies, lab environment and blank reagent). The similar distribution characteristics of the trace elements in the Geogas samples of anomalous areas and in the ores suggested that Geogas anomaly is affected by concealed orebodies in depth. The difference between REE patterns of the Geogas samples of the anomalous area and those of other solid media might be caused by inadequate analytical precision and low collecting efficiency of the instrument. It is believed that the REE tracing method can provide the information on the source of Geogas anomaly if the analytical precision and collecting efficiency of REE could be constantly increased.     

Investigation of CO2 behavior and study on design of optimal injection into Gorae-V aquifer

This study presents the Bottom-hole pressure (BHP) behavior with different wettabilities and the optimal design scheme to effectively inject CO₂ into the Gorae-V aquifer. As a result, the injection rate and injectivity were increased as the wettability condition became more water-wet. However, the more wettability condition becomes water-wet, the more the ultimate CO₂ injection volume decreases. When the injectivity was 346 ton/day/Mpa at the Gorae-V aquifer, the aquifer can sustain CO₂ injection at a rate of 2,425 tons per day over this time period. A design for a complete CCS system was developed based on the existing off-shore pipeline in combination with new on-shore CO₂ transport infrastructure, and a pressure of 12.8 MPa is required at the CO₂ source to maintain this injection rate.     

Microbial community changes in contaminated soils in response to phenanthrene amendment

Leachate and reclaimed wastewater have become the important sources of polycyclic aromatic hydrocarbons in soils. However, the information on bioremediation of leachate and reclaimed wastewater-contaminated soils is still lacking. Identification of changes in microbial structure or of enriched genera related to biodegradation could aid identification of particular organisms or consortia capable of degrading polycyclic aromatic hydrocarbons in these contaminated soils. In this study, terminal restriction fragment length polymorphism, coupled with 16S Ribosomal ribonucleic acid clone library analysis, was applied to investigate the composition of bacterial community in leachate-contaminated soil or grassland soil irrigated reclaimed wastewater and the response to phenanthrene amendment. Results showed that phenanthrene amendment had significant but different impacts on microbial community structure, dependent on soil source. Several greatly enriched terminal restriction fragments with phenanthrene biodegradation were identified. Moreover, genus rhizobacteria, possibly linked to phenanthrene biodegradation, was firstly reported in this study. This work might provide some new insights into bioremediation of polycyclic aromatic hydrocarbons-contaminated soils.     

Investigating the impact of the properties of pilot points on calibration of groundwater models: case study of a karst catchment in Rote Island,Indonesia

A robust configuration of pilot points in the parameterisation step of a model is crucial to accurately obtain a satisfactory model performance. However, the recommendations provided by the majority of recent researchers on pilot-point use are considered somewhat impractical. In this study, a practical approach is proposed for using pilot-point properties (i.e. number, distance and distribution method) in the calibration step of a groundwater model. For the first time, the relative distance–area ratio (d/A) and head-zonation-based (HZB) method are introduced, to assign pilot points into the model domain by incorporating a user-friendly zone ratio. This study provides some insights into the trade-off between maximising and restricting the number of pilot points, and offers a relative basis for selecting the pilot-point properties and distribution method in the development of a physically based groundwater model. The grid-based (GB) method is found to perform comparably better than the HZB method in terms of model performance and computational time. When using the GB method, this study recommends a distance–area ratio of 0.05, a distance–x-grid length ratio (d/X _grid) of 0.10, and a distance–y-grid length ratio (d/Y _grid) of 0.20.     

Subduction-related 200 Ma Talun metagranite,SE Taiwan: an age constraint for palaeo-Pacific plate subduction beneath South China Block during the Mesozoic

Various tectonic models have been proposed to account for the widely distributed igneous activities in the southeastern part of the South China Block (SCB) during the Triassic–Jurassic period. One of the major contending debates is on the timing of initiation of the palaeo-Pacific plate subduction under the SCB, due to lack of unequivocal evidence for arc magmatism during the period in this region.

The 191 ± 10 Ma (N = 5, MSWD = 12) calc-alkalic high-K I-type Talun metagranite occurs in the southern Tailuko belt of the Tananao metamorphic complex, Taiwan. In terms of age, this metagranite belongs to the Early Yanshanian igneous activity in the southeastern part of the SCB. However, its geographic position does not accord with the well-known general oceanward younging trend of the Yansnanian igneous rocks. In view of the large age uncertainty reported, this metagranite is redated in this study. Some zircons of this metagranite are high in U content and are metamict. Zircons with low U contents are analysed by SHRIMP yielding a more precise age of 200 ± 2 Ma (N = 10, MSWD = 4). In particular, the εHf(t) of these dated zircons ranges from +4.5 to +12.9. The metagranite mainly consists of quartz, K-feldspar, plagioclase, with minor amounts of garnet, biotite, zircon, apatite, and pyrrhotite. Chlorite and calcite are secondary phases overprinted by the later tectonic event(s). Its initial Sr isotope compositional range is 0.70473–0.70588, and εNd(t), +2.4 to +3.6. The results demonstrate that the genesis of this metagranite could be attributed to the assimilation-fractionation of a depleted mantle-derived basaltic magma, which was most likely related to arc magmatism. The present study therefore offers key evidence that during the Mesozoic, the palaeo-Pacific plate subduction underneath the SCB would have taken place no later than the very early Jurassic.