A traverse through the western Kunlun (Xinjiang,China): tentative geodynamic implications for the Paleozoic and Mesozoic

The northern part of the western Kunlun (southern margin of the Tarim basin) represents a Sinian rifted margin. To the south of this margin, the Sinian to Paleozoic Proto-Tethys Ocean formed. South-directed subduction of this ocean, beneath the continental southern Kunlun block during the Paleozoic, resulted in the collision between the northern and southern Kunlun blocks during the Devonian. The northern part of the Paleo-Tethys Ocean, located to the south of the southern Kunlun, was subducted to the north beneath the southern Kunlun during the Late Paleozoic to Early Mesozoic. This caused the formation of a subduction-accretion complex, including a sizeable accretionary wedge to the south of the southern Kunlun. A microcontinent (or oceanic plateau?), which we refer to as “Uygur terrane,” collided with the subduction complex during the Late Triassic. Both elements together represent the Kara-Kunlun. Final closure of the Paleo-Tethys Ocean took place during the Early Jurassic when the next southerly located continental block collided with the Kara-Kunlun area. From at least the Late Paleozoic to the Early Jurassic, the Tarim basin must be considered a back-arc region. The Kengxiwar lineament, which “connects” the Karakorum fault in the west and the Ruogiang-Xingxingxia/Altyn-Tagh fault zone in the east, shows signs of a polyphase strike-slip fault along which dextral and sinistral shearing occurred.     

Middle Miocene thermal metamorphism due to the infiltration of high-temperature fluid in the Sanbagawa metamorphic belt,southwest Japan

 The Middle Miocene Tobe hornfels in the Sanbagawa metamorphic belt, western Shikoku, southwest Japan, is characterized by an abnormally steep metamorphic gradient compared with other hornfelses associated with intrusive bodies. The basic hornfels, originally Sanbagawa greenschist rocks, is divided into the following three metamorphic zones: plagioclase, hornblende, and orthopyroxene. The plagioclase zone is defined by the appearance of calcic plagioclase, the hornblende zone by the assemblage of hornblende+calcic plagioclase+quartz, and the orthopyroxene zone is characterized by the assemblage of orthopyroxene + clinopyroxene + plagioclase + quartz. Calcic amphibole compositions change from actinolite to hornblende as a result of the continuous reactions during prograde metamorphism. Petrographical and thermometric studies indicate a metamorphic temperature range of 300–475°C for the plagioclase zone, 475–680°C for the hornblende zone, and 680–730°C for the orthopyroxene zone. The temperature gradient based on petrological studies is approximately 5°C/m, which is unusually high. Geological and petrological studies demonstrate that the hornfelses were formed by the focusing of high-temperature fluids through zones of relatively high fracture permeability. The steep thermal gradient in the Tobe hornfels body is consistent with a large fluid flux, greater than 8.3 × 10^–7 m³ m^–2S^–1, over the relatively short duration of metamorphism, approximately 100 years. Received: 10 October 1995 / Accepted: 28 May 1996     

Application of an optimum design technique for determining the coefficient of consolidation by using piezocone test data

For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation from piezocone test results. However, depending on assumptions and analytical techniques, it could vary considerably, even for a specific degree of consolidation. In this paper a method is proposed to determine a consistent coefficient of consolidation by applying the concept of an optimum design technique over all ranges of the degree of consolidation. Initial excess pore pressure distribution is assumed to be capable of being obtained by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of a two-dimensional linear-uncoupled axi-symmetric consolidation analysis. The minimization of differences between measured and predicted excess pore pressure was carried out by the BFGS unconstrained optimum design algorithm with a one-dimensional golden section search technique. By analyzing numerical examples and in-situ test results, it was found that the adopted optimum design technique gives consistent and convergent results.     

Nd and Sr isotopic constraints on the origin of igneous rocks resulting from the opening of the Japan Sea, southwestern Japan

Strontium and Nd isotopic compositions and trace element abundances were determined for Cretaceous to late Cenozoic igneous rocks from the Japan Sea side of Southwest Japan in order to investigate the effect of the opening of the Japan Sea on igneous activity. The ⁸⁷Sr/⁸⁶Sr ratios for both high and low silica rocks decrease with decreasing age since the middle Miocene, when the opening occurred. Similarly, ¹⁴³Nd/¹⁴⁴Nd values for these rocks increase with decreasing age, and are negatively correlated with ⁸⁷Sr/⁸⁶Sr ratios. A two-component mixing process can best account for these isotopic and chemical characteristics. One end-member is likely the subcontinental lithospheric mantle (SCLM) and its derivative mafic to intermediate materials which had ɛ_Nd values of around +3. The other endmember consists of mafic to intermediate rocks with low ɛ_Nd values (e.g., −8), probably located in the lower crust. The mantle upwelling associated with the opening of the Japan Sea did not supply typical MORB or MORB-source materials to the crust, but did provide the heat that caused the melting of lithospheric mantle and lower crust. Received: 29 August 1996 / Accepted: 6 May 1997     

H2O activity in concentrated KCl and KCl-NaCl solutions at high temperatures and pressures measured by the brucite-periclase equilibrium

H₂O activities in supercritical fluids in the system KCl-H₂O-(MgO) were measured at pressures of 1, 2, 4, 7, 10 and 15  kbar by numerous reversals of vapor compositions in equilibrium with brucite and periclase. Measurements spanned the range 550–900 °C. A change of state of solute KCl occurs as pressures increase above 2 kbar, by which H₂O activity becomes very low and, at pressures of 4 kbar and above, nearly coincident with the square of the mole fraction (x _H2O). The effect undoubtedly results primarily from ionic dissociation as H₂O density (ρ_H2O) approaches 1 gm/cm³, and is more pronounced than in the NaCl-H₂O system at the same P-T-X conditions. Six values of solute KCl activity were yielded by terminal points of the isobaric brucite-periclase T-x _H2O curves where sylvite saturation occurs. The H₂O mole fraction of the isobaric invariant assemblage brucite-periclase-sylvite-fluid is near 0.52 at all pressures, and the corresponding temperatures span only 100 °C between 1 and 15 kbar. This remarkable convergence of the isobaric equilibrium curves reflects the great influence of pressure on lowering of both KCl and H₂O activities. The H₂O and KCl activities can be expressed by the formulas: a _H2O = γ_H2O[x _H2O+(1 + (1 + α)x _KCl)], and a _KCL = γ_KCl[(1 + α)x _KCl/(x _H2O +(1 + α)x _KCl)]^(1 + α), where α is a degree of dissociation parameter which increases from zero at the lowest pressures to near one at high pressures and the γ's are activity coefficients based on an empirical regular solution parameter W: ln γ_i = (1 − x_i)²W. Least squares fitting of our H₂O and KCl activity data evaluates the parameters: α = exp(4.166 −2.709/ρ_H2O) − 212.1P/T, and W = (−589.6 − 23.10P) /T, with ρ_H2O in gm/cm³, P in kbar and T in K. The standard deviation from the measured activities is only ± 0.014. The equations define isobaric liquidus curves, which are in perfect agreement with previous DTA liquidus measurements at 0.5–2 kbar, but which depart progressively from their extrapolation to higher pressures because of the pressure-induced dissociation effect. The great similarity of the NaCl-H₂O and KCl-H₂O systems suggests that H₂O activities in the ternary NaCl-KCl-H₂O system can be described with reasonable accuracy by assuming proportionality between the binary systems. This assumption was verified by a few reconnaissance measurements at 10 kbar of the brucite-periclase equilibrium with a Na/(Na + K) ratio of 0.5 and of the saturation temperature for Na/(Na + K) of 0.35 and 0.50. At that pressure the brucite-periclase curves reach a lowest x _H2O of 0.45 and a temperature of 587 °C before salt saturation occurs, values considerably lower than in either binary. This double-salt eutectic effect may have a significant application to natural polyionic hypersaline solutions in the deep crust and upper mantle in that higher solute concentrations and very low H₂O activities may be realized in complex solutions before salt saturation occurs. Concentrated salt solutions seem, from this standpoint, and also because of high mechanical mobility and alkali-exchanging potential, feasible as metasomatic fluids for a variety of deep-crust and upper mantle processes. Received: 9 August 1996 / Accepted: 15 November 1996     

Attenuation differences in layer 2A in intermediate- and slow-spreading oceanic crust

In situ seismic attenuationQ⁻¹logs are derived from borehole velocity profiles and reveal sharp boundaries between morphologies of the extrusive volcanic layers in intermediate- and slow-spreading oceanic crust.Q⁻¹logs are calculated from the scattering attenuation associated with vertical velocity heterogeneity in Ocean Drilling Program Holes 504B and 896A and in Hole 395A, located in 5.9–7.3 Ma crust on the Pacific and Atlantic plates, respectively. Our results strongly tie crustal properties to seismic measurables and observed geological structures: we find that the scattering attenuation can be used to identify the extrusive volcanic sequence because it is closely related to changes in the degree of vertical heterogeneity. We interpret a distinct decrease in the Q⁻¹log at the transition below the extrusive volcanic layer to correspond with the seismic layer 2A/2B boundary. The boundary is located at 465 m depth below the sea floor in both Hole 395A and 504B, although this is likely to be a coincidence of the sediment thickness at these sites. Layer 2A is estimated to be approximately 150 m thick in Hole 504B and > 300 m thick in Hole 395A. Cyclic sequences of high-porosity pillows and low-porosity massive units in the uppermost 100 m of volcanics in Hole 395A result in large velocity heterogeneities which cause > 5 times more attenuation in this layer than in Hole 504B. In Hole 896A, by contrast, fewer pillows, more massive flows, and a greater volume of carbonate veins decrease the velocity heterogeneity and attenuation significantly over only 1 km distance from Hole 504B. We conclude that the attenuation in the extrusive volcanics of the ocean crust is largely controlled by variation in local heterogeneity and morphology as well as by subsequent hydrothermal alteration. The observed differences inQ⁻¹profiles and layer 2A thickness at these sites may be attributed to variations in the volume and duration of volcanic activity at mid-ocean spreading centers for these Pacific and Atlantic ridge segments.     

Regionalization of unit hydrograph parameters: 1. Comparison of regression analysis techniques

Hydrologic regionalization is a useful tool that allows for the transfer of hydrological information from gaged sites to ungaged sites. This study developed regional regression equations that relate the two parameters in Nash's IUH model to the basin characteristics for 42 major watersheds in Taiwan. In the process of developing the regional equations, different regression procedures including the conventional univariate regression, multivariate regression, and seemingly unrelated regression were used. Multivariate regression and seeming unrelated regression were applied because there exists a rather strong correlation between the Nash's IUH parameters. Furthermore, a validation study was conducted to examine the predictability of regional equations derived by different regression procedures. The study indicates that hydrologic regionalization involving several dependent variables should consider their correlations in the process of establishing the regional equations. The consideration of such correlation will enhance the predictability of resulting regional equations as compared with the ones from the conventional univariate regression procedure.     

Regionalization of unit hydrograph Parameters: 2. Uncertainty analysis

Hydrologic model parameters obtained from regional regression equations are subject to uncertainty. Consequently, hydrologic model outputs based on the stochastic parameters are random. This paper presents a systematic analysis of uncertainty associated with the two parameters, N and K, in Nash's IUH model from different regional regression equations. The uncertainty features associated with N and K are further incorporated to assess the uncertainty of the resulting IUH. Numerical results indicate that uncertainty of N and K from the regional regression equations are too significant to be ignored.     

Afternoon mid-latitude current system and low-latitude geomagnetic field asymmetry during geomagnetic storms

For four geomagnetic storms of middle intensity the relationship between the low-latitude magnetic field asymmetry using ASY indices and the intensity of the auroral eastward and westward electro-jet was considered. It was asked whether there exists a connection between ASY and the eastward electrojet. To answer this question equivalent current systems were estimated in mid-latitudes. It was found that the observations obviously show no correlative relationship between the low-latitude magnetic-field asymmetry and the eastward electrojet, whereas one exists between ASY and the westward electrojet. To explain the generally accepted common three-dimensional current system between the partial ring current and the eastward electrojet, a condensor model of the three-dimensional current system was developed. It could be shown that the short periodic variations of the partial ring current are shielded by the condensor and cannot influence the eastward-electrojet current.