鄂尔多斯盆地姬塬地区长8低渗透砂岩储层微观孔隙结构特征研究

以常规压汞、铸体图像、扫描电镜和薄片观察为基础,结合恒速压汞测试,对鄂尔多斯盆地姬塬地区长8低渗透砂岩储层微观孔隙结构特征进行研究。结果表明,姬塬地区长8储层孔隙类型多样,以残余粒间孔为主,孔隙结构可划分为4种类型。恒速压汞测试表明,姬塬长8储层为大孔细喉型。与特低渗透储层相比,超低渗透储层喉道分布范围更集中,小喉道所占比例更大,孔喉半径比分布范围更宽。特低、超低渗透储层差异主要体现在喉道的大小和分布上,喉道控制储层品质及渗流能力。在低渗透砂岩储层的开发中应尤其注重孔喉间的配置关系。     

某铅锌尾矿库对地下水环境影响及防治措施

铅锌尾矿的浸出液中含有重金属等对地下水环境有重要影响的污染因子。利用地下水数值模拟专业软件GMS,结合研究区水文地质条件,对不同工况下地下水环境的影响程度及范围进行模拟计算。结果表明,达到Ⅱ类工业固体废弃物处置场规定的防渗要求条件下,尾矿库运行浸出液下渗量有限(2.8 m3/d),并不会使区域地下水超出《地下水质量标准》Ⅲ类标准,而防渗层仅出现10%破损时,浸出液下渗量为(97.22 m3/d),使地下水下游方向50 m内地下水中Pb超出Ⅲ类标准,超标范围约0.0375 km2。反映出该类处置场中的防渗措施是对地下水环境保护的重要保证。     

坝上草原相关花粉源范围与相对花粉产量估算

基于坝上草原地区30个采样点表土花粉分析和植被调查的研究结果显示, 花粉组合以蒿属、藜科、禾本科、菊科和莎草科等草本植物为主, 基本能够反映草原植被特征, 但花粉百分比与其在植被中盖度差异明显。运用Extended R-Value(ERV)模型估算的坝上草原区相关花粉源范围大致为2100m, 当风速大于3.5m/s时, 基本稳定, 受风速影响不大。估算的相对花粉产量结果显示, 蒿属和藜科的相对花粉产量最高, 为禾本科的20倍左右; 其次为莎草科和菊科, 为禾本科的7~9倍; 百合科略高于禾本科; 旋花科、豆科、唇形科及委陵菜属的相对花粉产量则明显低于禾本科。利用相对花粉产量对花粉与植被关系的校正结果表明: 蒿属、藜科的校正效果明显, 其相对花粉产量可以作为定量重建古植被的参考; 莎草科、菊科、百合科和唇形科由于受植被和花粉数据梯度限制, 其相对花粉产量能否用于植被与花粉关系的校正有待通过更多植被群落调查进一步证实;其他花粉类型由于在花粉组合中含量多低于5 %, 所以在校正花粉与植被关系时的作用不明显。     

四川省赋煤构造单元划分及构造控煤作用分析

通过对四川省地质构造后期演化及其变形特征的综合研究,结合主要含煤岩系分布及聚煤特征,将四川省赋煤构造单元划分为川南-黔北、华蓥山、米苍山-大巴山、龙门山、川中、大凉山-攀枝花、盐源、巴颜喀拉、西秦岭9个二级赋煤构造带。以构造研究为主线,根据主要含煤岩系和煤层赋存特征与构造形态之间的关系,结合野外实地调查、煤田地质勘查资料以及典型控煤构造特征分析,研究区控煤构造可划分为5大类14种类型,虽然构造样式丰富,类型多样,但主要以挤压构造样式的褶皱断裂组合和逆冲断裂组合为主,其它各类构造样式虽有发育,但数量较少,规模一般也不大。     

Advance in Pollen Source Area

The conception of pollen source area has attracted broadly attention since it was proposed in the 1960s. In this paper,it can be subdivided into Normal Source Area of Pollen (NSAP) and Relevant Source Area of Pollen (RSAP) based on reviewing former studies and our recent work of vegetation survey and pollen analysis in the Northern China. The NSAP means a source area of pollen input a sedimentary basin,indicating a distance area beyond where the pollen contents of major pollen types do not show evident increase with increased distance. The RSAP means a source area of pollen assemblages in a basin has the closest relationship with surrounding plants,indicating a distance area beyond where the relationship between pollen assemblage and surrounding vegetation do not show obvious increase with increased distance. The changes of sedimentary basins radii and pollen grain size influence the NSAP and RSAP evidently. Wind speed also changes the NSAP, but does not significantly affect RSAP. The pollen of a sedimentary basin is composed of local pollen,regional pollen and extra regional pollen,which usually account for 30%~45%,25%~60% and 10%~30%,respectively. Local pollen which refers to the pollen coming within the RSAP range,is a reflection of the surrounding vegetation,and has important implications to the reconstruction and succession of local vegetation. Regional pollen which refers to the pollen coming from within the range of NSAP and excluding the range of local pollen,is the important carrier of studies for vegetation restoration and climate change. The pollen that comes outside the range of NSAP is called Extra regional pollen,which is mainly from greater distance by upper air flow,and has no indicator significance to the regional vegetation.     

The 2010 Yushu earthquake triggered landslide hazard mapping using GIS and weight of evidence modeling

The Yushu County, Qinghai Province, China, April 14, 2010, earthquake triggered thousands of landslides in a zone between 96°20′32.9″E and 97°10′8.9″E, and 32°52′6.7″N and 33°19′47.9″N. This study examines the use of geographic information system (GIS) technology and Bayesian statistics in creating a suitable landslide hazard-zone map of good predictive power. A total of 2,036 landslides were interpreted from high-resolution aerial photographs and multi-source satellite images pre- and post-earthquake, and verified by selected field checking before a final landslide-inventory map of the study area could be established using GIS software. The 2,036 landslides were randomly partitioned into two subsets: a training dataset, which contains 80 % (1,628 landslides), for training the model; and a testing dataset 20 % (408 landslides). Twelve earthquake triggered landslide associated controlling parameters, such as elevation, slope gradient, slope aspect, slope curvature, topographic position, distance from main surface ruptures, peak ground acceleration, distance from roads, normalized difference vegetation index, distance from drainages, lithology, and distance from all faults were obtained from variety of data sources. Landslide hazard indices were calculated using the weight of evidence model. The landslide hazard map was compared with training data and testing data to obtain the success rate and predictive rate of the model, respectively. The validation results showed satisfactory agreement between the hazard map and the existing landslide distribution data. The success rate is 80.607 %, and the predictive rate is 78.855 %. The resulting landslide hazard map showed five classes of landslide hazard, i.e., very high, high, moderate, low and very low. The landslide hazard evaluation map should be useful for environmental recovery planning and reconstruction work.     

A Revisited Purification of Li for ‘Na Breakthrough’ and its Isotopic Determination by MC‐ICP‐MS

The accurate and precise determination of Li isotopic composition by MC‐ICP‐MS suffers from the poor performance of traditional column chromatography. Previously established chromatographic processes cannot completely remove Na in complex geological samples, which is currently interpreted to be a result of Na breakthrough. In this study, Na breakthrough during single‐column purification was found to differ between simply artificial Na‐containing sample solutions, where a little Na residue was found, and silicate rocks, where a large amount of breakthrough occurred. A revised two‐step column purification for Li using 0.5 and 0.3 mol l^?1 HCl as eluents was designed to remove the Na. This modified method achieves high‐efficiency Li purification from Na and consequently avoiding high Na/Li ratio interference for subsequent MC‐ICP‐MS analyses. The proposed method was validated by the analysis of a series of reference materials, including Li₂CO₃ (IRMM‐016, ‐0.10‰), basalt (BCR‐2: 2.68‰; BHVO‐2: 4.39‰), andesite (AGV‐2: 6.46‰; RGM‐2: 2.59‰), granodiorite (GSP‐2: ?0.87‰) and seawater (CASS‐5, 30.88‰). This work reports early Na appearance prior to the elution curves in chromatography and emphasises its influence for subsequent Li isotope measurement. Based on the findings, the established two‐step method would be more secure than single‐column chemistry for Li purification.     

乳山金矿煌斑岩的Sm-Nd同位素研究

乳山金矿区发育多种与金矿脉在时空上密切伴生的煌斑岩脉。煌斑岩的稀土元素含量和配分曲线与胶东群残留体和昆嵛山花岗岩的均较相似；三者的εNd(t)、INd(t)和tDM亦甚为相近。胶东群的分异熔融作用，可较好地解释煌斑岩与花岗岩和胶东群残留体在成因上的渊源关系。     

白云鄂博赋矿白云岩与微晶丘和碳酸岩墙的碳氧同位素对比研究

本文通过方解石和白云石的碳和氧同位素分析,对比研究了白云鄂博赋矿白云岩、黑脑包微晶丘、北京西山微晶丘、宽沟北正常沉积灰岩和白云鄂博碳酸岩墙,从而探讨了赋矿白云岩的成因及其与超大型Fe-Nb-REE矿床的成因关系。结果为:①黑脑包腮林忽洞群顶部微晶丘和北京西山寒武系顶部微晶丘碳酸盐的δ~(13)C值都在0±2‰左右,δ~(18)O值为18.3‰～25.1‰,均具有典型海相沉积碳酸盐岩的特点;②白云鄂博东矿采场δ~(13)C值为-7.9‰～-1.1‰,δ~(18)O值为9.1‰～20.9‰;矿区东西两端δ~(13)C值-7.9‰～-0.6‰,δ~(18)O值8.6‰～25.7‰;均介于地幔流体与典型沉积碳酸盐岩之间。部分赋矿白云岩样品中白云石与方解石之间的碳氧同位素分馏△~(13)C和△~(18)O值均小于0‰,表明其受到过次生蚀变作用,低δ~(18)O值白云石样品所对应的负△~(18)O值反映了地幔镁质流体对沉积碳酸盐岩的强烈交代作用;③矿区—富稀土碳酸岩墙的δ~(13)C值为-7.2‰～-4.7‰,δ~(18)O价值为11.9‰～16.4‰,表明其碳酸岩岩浆并非原始地幔来源,而可能与俯冲板块携带的沉积碳酸盐岩与地幔流体在深部的高温混合熔融有关。碳酸岩墙中白云石与方解石之间的碳和氧同位素分馏均小于0‰,说明该碳酸岩墙中的白云石与方解石并非同成因矿物,至少其中之一为