逆断层地震近场地震动影响场和地表形变模拟

本文设计了一个MW7.0级地震的简单的逆断层有限移动源破裂模型,计算了断层周围64个观测点的加速度、速度和位移时程及峰值,简单讨论了近场地震动峰值、断层附近地表永久位移(或地表形变)的分布特点,并讨论了永久位移和地面运动速度大脉冲的关系。重点研究了断层附近三分量的永久位移(或地表形变)大小、方向和地震动作用特点。     

基于脉冲响应数据的ARMA法建模以及模态参数识别

本文提出了基于脉冲响应数据的ARMA法建模以及模态参数识别的新方法。该方法利用单位脉冲响应函数与ARMA模型G reen函数等价的特点,通过脉冲响应函数来估计系统响应的自相关系数,然后建立推广的Yu le-W alker方程以求得ARMA模型自回归系数并进行参数识别。最后通过算例,对一个模拟系统进行了参数识别,对采样频率、识别精度、模型阶数之间的影响规律进行了分析。     

超高强混凝土短柱抗震性能的试验研究

通过对12根剪跨比λ=2．0的超高强混凝土短柱在低周反复荷载下抗震性能的试验研究,分析了其破坏形态,并研究了轴压比和配箍率对试件滞回特性和抗震延性的影响,提出了满足一定延性要求（μ△≥3．0）超高强混凝土短柱的轴压比限值和箍筋加密区的最小配箍特征值的建议值。该值可为现行规范的修订提供参考。     

A comparative study between China and U.S. on seismic design philosophy and practice of a long span arch bridge

This paper presents the first of a series of case studies on the seismic design of long span bridges （cable-stayed bridges, suspension bridges and arch bridges） under a cooperative research project on seismic behavior and design of highway bridges between the State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University and the Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo. The objective of this series of case studies is to examine the differences and similarities on the seismic design practice of long span bridges in China and the U.S., to identify research needs and to develop design guidelines beneficial to bridge engineers in both countries. Unlike short to medium span bridges, long span bridges are not included in most seismic design specifications, mainly because they are location dependent and structurally unique. In this paper, an available model of a steel tied half through arch bridge with a main span of 550m in China is discussed. Analysis is focused on comparisons of the seismic responses due to different ground motions. Seismic design criteria and seismic performance requirements for long span bridges in both countries were first introduced and compared, and then three near field earthquake records with large vertical components were selected as the excitations to examine the seismic behavior and seismic vulnerability of the bridge. Results show that （1） the selected near field ground motions cause larger responses to key components （critical sections） of the bridge （such as arch rib ends） with a maximum increase of more than twice those caused by the site specific ground motions; （2） piers, longitudinal girders and arch crowns are more vulnerable to vertical motions, especially their axial forces; and （3） large vertical components of near field ground motions may not significantly affect the bridge＇s internal forces provided that their peak acceleration spectra ordinates only appear at periods of less than 0.2s. However, they may have more influence on the longitudinal displacements of sliding bearings due to their large displacement spectra ordinates at the fundamental period of the bridge.     

Determination of the degree 120 time-variable gravity field in the Sichuan-Yunnan region using Slepian functions and terrestrial measurements

The terrestrial time-variable gravity measurements are characterized by a high signal-to-noise ratio and sensitivity to the sources of mass change in the Earth's crust. These gravity data have many applications, such as surface deformation, groundwater storage changes, and mass migration before and after earthquakes. Based on repeated terrestrial gravity measurements at 198 gravity stations in the Sichuan-Yunnan region (SYR) from 2015 to 2017, we determine a time series of degree 120 gravity fields using the localized spherical harmonic (Slepian) basis functions. Our results show that adopting the first 6 Slepian basis functions is sufficient for effective localized Slepian modeling in the SYR. The differences between two gravity campaigns at the same time of year show an obvious correlation with tectonic features. The degree 120 timevariable gravity models presented in this paper will benefit the study of the regional mass migration inside the crust of the SYR and supplement the existing geophysical models for the China Seismic Experimental Site.     

DNQ3型能见度仪故障分析及校准方法研究

为有效提高国家地面气象观测站能见度仪观测数据准确性和设备运行稳定性,对能见度仪开展日常维护、核查校准、数据质控和故障修复等工作显得尤为重要。该文通过对DNQ3型前向散射能见度仪硬件结构和基本工作原理的介绍,以及对一些典型故障进行分析,总结出能见度仪的检测维修流程,归纳了对应的故障解决措施,凝练出该型能见度仪的核查校准和疑误数据质控方法,为一线业务人员开展能见度仪常规维护、故障排查、运行监控等提供借鉴。     

Numerical Simulation of Random Wave Overtopping of Rubble Mound Breakwater with Armor Units

Based on the open source code OpenFOAM,a three-dimensional model is presented for simulation of the interaction between waves and rubble mound breakwater with armor units.The armor units with their real geometries are depicted through computational grids.The volume-averaged RANS equation and the seepage equation containing nonlinear term are used to describe the percolation in the core and underlayer of the breakwater.Grids independence analysis are carried out,the horizontal and vertical grid size are recommended to take as one-fifteenth of the mean nominal diameter D₅₀ of the armor units and one-fifteenth of the wave height respectively.Random wave overtopping of rubble mound breakwater with armor units is simulated through the proposed model.The results show good agreement between the simulated and measured overtopping discharge rates for different types of armor units.The developed numerical model can be used to evaluate the random wave overtopping in design of rubble mound breakwater with artificial armor blocs.     

基于一维综合孔径微波辐射计的海面温度反演研究

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.     

2017年春季季风间期南海中北部浮游植物生长与微型浮游动物摄食

Phytoplankton growth rates and mortality rates were experimentally examined at 21 stations during the 2017 spring intermonsoon(April to early May) in the northern and central South China Sea(SCS) using the dilution technique, with emphasis on a comparison between the northern and central SCS areas which had different environmental factors. There had been higher temperature but lower nutrients and chlorophyll a concentrations in the central SCS than those in the northern SCS. The mean rates of phytoplankton growth(μ_0) and microzooplankton grazing(m) were(0.88±0.33) d~(–1) and(0.55±0.22) d~(–1) in the central SCS, and both higher than those in the northern SCS with the values of μ_0((0.81±0.16) d~(–1)) and m((0.30±0.09) d~(–1)), respectively.Phytoplankton growth and microzooplankton grazing rates were significantly coupled in both areas. The microzooplankton grazing impact(m/μ_0) on phytoplankton was also higher in the central SCS(0.63±0.12) than that in the northern SCS(0.37±0.06). The microzooplankton abundance was significantly correlated with temperature in the surface. Temperature might more effectively promote the microzooplankton grazing rate than phytoplankton growth rate, which might contribute to higher m and m/μ_0 in the central SCS. Compared with temperature, nutrients mainly affected the growth rate of phytoplankton. In the nutrient enrichment treatment,the phytoplankton growth rate(μn) was higher than μ_0 in the central SCS, suggesting phytoplankton growth in the central SCS was nutrient limited. The ratio of μ_0/μn was significantly correlated with nutrients concentrations in the both areas, indicating the limitation of nutrients was related to the concentrations of background nutrients in the study stations.     

2010-2018年北极夏季中国北极科学考察航行期间被动微波遥感海冰密集度与船基目视观测资料的比较

为了更有效地将卫星数据应用于北极航行导航,被动微波（PM）产品的海冰密集度（SIC）与从中国北极科学考察中收集到的船基目视观测（OBS）资料进行了比较。在2010、2012、2014、2016和2018年的北极夏季总共收集了3667组目测数据。PM SIC取自基于SSMIS传感器的NASA-Team（NT）、Bootstrap（BT）以及Climate Data Record（CDR）算法和基于AMSR-E/AMSR-2传感器的BT、enhanced NT（NT2）以及ARTIST Sea Ice（ASI）算法。使用PM SIC的日算术平均值和OBS SIC的日加权平均值进行比较。比较了PM SIC和OBS SIC之间的相关系数,偏差和均方根偏差,包括总体趋势以及在轻度/普通/严重冰况下的情况。使用OBS数据,浮冰尺寸和冰厚对不同PM产品SIC反演的影响可以通过计算浮冰尺寸编码和冰厚的日加权平均值来评估。我们的结果显示相关系数的范围为0.89（AMSR-E/AMSR-2 NT2）到0.95（SSMIS NT）,偏差的范围为-3.96%（SSMIS NT）到12.05%（AMSR-E/AMSR-2）,均方根偏差的范围为10.81%（SSMIS NT）到20.15%（AMSR-E/AMSR-2 NT2）。浮冰尺寸对PM产品的SIC反演有显著的影响,大多数PM产品倾向于在小浮冰尺寸情况下低估SIC,而在大浮冰尺寸情况下高估SIC。超过30 cm的冰厚对于PM产品的SIC反演没有明显影响。总体来看,在北极夏季,SSMIS NT SIC与OBS SIC之间有着最好的一致性,而AMSR-E/AMSR-2 NT2 SIC与OBS SIC的一致性最差。