Comprehensive analyses of the initiation and landslide-generated wave processes of the 24 June 2015 Hongyanzi landslide at the Three Gorges Reservoir,China

Reservoir landslides pose a great threat to shipping safety, human lives and properties, and the operation of the hydropower station. In this paper, the 24 June 2015 Hongyanzi landslide at the Three Gorges Reservoir is considered as an example to study the initiation mechanism and landslide-generated wave process of a reservoir landslide. The finite difference method and limit equilibrium analysis are used to analyze the deformation and failure characteristics of the Hongyanzi slope. Simulation results show that a large deformation (about 358 mm) happens in the shallow deposits under intermittent rainfall condition, and the slope is in a limit state. At the same time, continuous rapid drawdown of the water level (about ?0.55 m/day during 8–24 June 2015) reduced the support and accelerated the drainage of the water for the bank slope. A coupling effect of intermittent rainfall and rapid drawdown of the water level was the triggering factor of the 24 June Hongyanzi landslide. Landslide-generated wave process was simulated using a fluid–solid coupling method by integrating the general moving object collision model. Simulation results show that the landslide-generated wave is dominated by the impulse wave, which is generated by sliding masses entering the river with high speed. The maximum wave height is about 5.90 m, and the wave would decay gradually as it spreads because of friction and energy dissipation. To prevent reservoir landslides, the speed for the rising or drawdown of the water level should be controlled, and most importantly, rapid drawdown should be avoided.     

Molybdenum Mass Fractions and Isotopic Compositions of International Geological Reference Materials

The double‐spike method with multi‐collector inductively coupled plasma‐mass spectrometry was used to measure the Mo mass fractions and isotopic compositions of a set of geological reference materials including the mineral molybdenite, seawater, coral, as well as igneous and sedimentary rocks. The long‐term reproducibility of the Mo isotopic measurements, based on two‐year analyses of NIST SRM 3134 reference solutions and seawater samples, was ≤ 0.07‰ (two standard deviations, 2s, n = 167) for δ^98/95Mo. Accuracy was evaluated by analyses of Atlantic seawater, which yielded a mean δ^98/95Mo of 2.03 ± 0.06‰ (2s, n = 30, relative to NIST SRM 3134 = 0‰) and mass fraction of 0.0104 ± 0.0006 μg g^?1 (2s, n = 30), which is indistinguishable from seawater samples taken world‐wide and measured in other laboratories. The comprehensive data set presented in this study serves as a reference for quality assurance and interlaboratory comparison of high‐precision Mo mass fractions and isotopic compositions.     

The August 27, 2014, rock avalanche and related impulse water waves in Fuquan,Guizhou, China

At about 8:30 p.m. on 27 August 2014, a catastrophic rock avalanche suddenly occurred in Fuquan, Yunnan, southwestern China. This landslide and related impulse water waves destroyed two villages and killed 23 persons. The impulse waves occurred after initiation of the landslide, caused by the main part of the slide mass rapidly plunging into a water-filled quarry below the source area. The wave, comprising muddy water and rock debris, impacted the opposite slope of the quarry on the western side of the runout path and washed away three homes in Xinwan village. Part of the displaced material traveled a horizontal distance of about 40 m from its source and destroyed the village of Xiaoba. To provide information for potential landslide hazard zonation in this area, a combined landslide–wave simulation was undertaken. A dynamic landslide analysis (DAN-W) model is used to simulate the landslide propagation before entering the quarry, while Fluent (Ansys Inc., USA) is used to simulate the impulse wave generation and propagation. Output data from the DAN-W simulation are used as input parameters for wave modeling, and there is good agreement between the observed and simulated results of the landslide propagation. Notably, the locations affected by recordable waves according to the simulation correspond to those recorded by field investigation.     

海洋生态文明建设对海域使用论证工作的具体指导

海洋生态文明建设是我国生态文明建设的重要组成部分。海域使用论证作为各类用海项目用海可行性分析的技术性分析工作,在论证工作中引导用海项目贯彻海洋生态文明建设理念,落实海洋生态文明建设具体方案,极具现实意义。文章按照海域使用论证工作流程,依据海洋生态文明建设具体方案,按阶段分析了海域使用论证工作的具体工作内容,以求通过海域使用论证工作落实海洋生态文明建设对用海项目的具体指导。     

Experimental study of motion characteristics of rock slopes with weak intercalation under seismic excitation

In order to investigate the effect of a weak intercalation on slope stability, a large-scale shaking table model test was conducted to study the dynamic response of rock slope models with weak intercalation. The dynamic response of the prototype slopes were studied in laboratory with the consideration of law of similitude. The initiation failure was observed in the rock slope model with a counter-tilt thin-weak intercalation firstly, not in the slope model with a horizontal thin-weak intercalation. Furthermore, it was interesting that the fracture site is shifted from crest top to the slope surface near the weak intercalation, which is different with the location of failure position in a normal layered slope. We also discussed the effect of the dip angle and the thickness of weak intercalation on the failure mechanism and instability mode of the layered rock slope. From the experimental result, it was noted that the stability of the slope with a counter-tilt weak intercalation could be worse than that of the other slopes under seismic excitation. The findings showed the difference of failure in slopes with a horizontal and counter weak intercalation, and implicated the further evaluation of failure of layered slopes caused by seismic loads.     

Biodegradation of <Emphasis Type="Italic">Enteromorpha</Emphasis> polysaccharides by intestinal micro-community from <Emphasis Type="Italic">Siganus oramin</Emphasis>

Micro-communities are supposed to have more potential functions of biodegradation of polysaccharides than single strain; however, the intestinal micro-communities involved in the biodegradation of Enteromorpha polysaccharides (EP) were seldom reported. In order to obtain the EP-degrading micro-community, the intestines of Siganus oramin was obtained to isolate the micro-communities, which were enriched by 0.3% of EP as the sole carbon source. A stable micro-community with EP degradative capability was achieved after seven generations of subculture, named H1. Results showed that H1 was able to degrade 75% of EP within 24 hours, and the activity of EP lyases reached 500 U mL^?1 in 32 hours. With denaturing gradient gel electrophoresis (DGGE) and 16S rRNA gene clone library analysis, ten bacteria closely related to Marinomonas pontica, Microbacterium sp., Leucobacter chironomi, Cyclobacterium sp., Algoriphagus winogradskyi, Pseudoalteromonas sp. and Vibrio sp. were determined. Furthermore, compared with the DGGE bands sequence and the clone library analysis, the dominant bacteria of the EP-biodegrading micro- community were Pseudoalteromonas sp. and Vibrio sp., with the respective proportion of 38% and 46%, and they should play an important role in EP degradation together with other degrading bacteria in the micro-community H1.     

Phase characteristic analysis of continuous depth air-gun source wavelet

Air guns are important sources for marine seismic exploration. Far-field wavelet of air gun arrays, as a necessary parameter for pre-stack processing and source models, plays an important role during marine seismic data processing and interpretation. When an air gun fires, it generates a series of air bubbles. Similar to onshore seismic exploration, the water forms a plastic fluid near the bubble; the farther the air gun is located from the measurement, the more steady and more accurately represented the wavelet will be. In practice, hydrophones should be placed more than 100 m from the air gun; however, traditional seismic cables cannot meet this requirement. On the other hand, vertical cables provide a viable solution to this problem. This study uses a vertical cable to receive wavelets from 38 air guns and data are collected offshore Southeast Qiong, where the water depth is over 1000 m. In this study, the wavelets measured using this technique coincide very well with the simulated wavelets and can therefore represent the real shape of the wavelets. This experiment fills a technology gap in China.     

Testing and modeling of the mechanical behavior of dolomite in the Wudongde hydropower plant

In order to understand the mechanical behaviours of the surrounding rocks in the underground caverns of the Wudongde hydropower plant, triaxial tests are performed on a type of dolomite. It is revealed that damage induced by crack development is the main factor controlling the nonlinear plastic deformation and failure behaviour of the dolomite in both pre- and post-peak regimes. Based on this understanding, a coupled elastoplastic damage model is developed for capturing the dolomite’s mechanical behaviours. In the model, the effects of plasticity and damage on rocks is described by introducing plastic hardening and damage softening commonly in the plastic yield surface. Which are both derived from a suitable Helmholtz free energy function. The model is used to simulate the triaxial tests. Comparisons between test results and the numerical modelling show that the developed model is capable of describing the macro mechanical behaviours of the Wudongde dolomite.