Proximal and distal styles of pegmatite-related metasomatic emerald mineralization at Ianapera,southern Madagascar

The Ianapera emerald deposit is located in the Neoproterozoic Vohibory Block of southern Madagascar. The local geology consists of intercalated migmatitic gneissic units and calcareous metasedimentary rocks, containing boudinaged metamorphosed mafic/ultramafic lenses, all intruded by pegmatite veins. These units occur near the hinge of the tightly folded Ianapera antiform, within a few kilometers of the Ampanihy shear zone. Emerald mineralization is hosted by metasomatic phlogopite veins, and bodies developed within the mafic/ultramafic rocks. Based on field and textural relationships, we distinguish proximal and distal styles of mineralization. Proximal mineralization occurs at the contact of pegmatite veins with mafic/ultramafic units; in the distal style, pegmatites are not observed. Three types of emeralds could be distinguished, mainly on the basis of color and mineral zoning. Some of these emeralds have the most Al-depleted and Cr-rich composition ever recorded. Another characteristic feature to the Ianapera deposit and, to our knowledge, yet unreported, is the association of some emeralds with scapolite in metasomatised mafic rocks. Mineral inclusions are common in most emeralds and include phlogopite, carbonates, barite, K-feldspar, quartz, pyrite, zircon, monazite, bastnaesite, phenakite, plus Fe and Cr oxides. However, feldspar and rare earth element-bearing minerals occur predominantly in proximal emeralds, which also have a more incompatible trace-element signature than distal emeralds. We propose a model related to syn- to post-tectonic magmatic-hydrothermal activity. Pegmatitic bodies intruded units of the Ianapera antiform probably during tectonic relaxation. Exsolution of fluids rich in halogens and incompatible elements from the cooling pegmatites caused hydrothermal metasomatism of Cr-bearing mafic/ultramafic rocks in direct contact with the pegmatites. Local fracturing favored fluid infiltration, permitting the formation of distal mineralization. Emerald composition was controlled by the chemistry of the host rock. The presence of carbonate mineral inclusions in the emeralds and the high F-activity indicated by elevated F-contents in newly formed minerals suggest transport of Be as a fluoride-carbonate complex. It seems likely that beryl formation was triggered by precipitation of F-rich phlogopite, which removed the complexing ligand from the fluid.     

Tin partition behavior and implications for the Furong tin ore formation associated with peralkaline intrusive granite in Hunan Province,China

Tin deposits are often closely associated with granitic intrusions. In this study, we analyzed tin partition coefficients between different fluids and melts (\({\text{D}}_{Sn}^{aq.fl./melt}\)) as well as various crystals and melts \({\text{D}}_{Sn}^{aq.fl./melt}\)(\({\text{D}}_{Sn}^{crystal/melt}\)) from the Furong tin deposit associated with the Qitianling A-type granite. Our experimental results indicate that tin partition behavior is affected by the chemical compositions of fluids, melts, and minerals. Tin is prone to partitioning into the residual magma in fractional crystallization or other differential magmatic processes if the magma originated from crustal sources with high alkali content, high volatile content, and low oxygen fugacity. Highly evolved residual peralkaline granitic magma enriched in tin can lead to tin mineralization in a later stage. Furthermore, the volatiles F and Cl in the magma play important roles in tin partitioning behavior. Low F contents in the melt phase and high Cl content in the aqueous fluid phase are favorable factors for tin partitioning in the aqueous fluid phase. High Cl content in the aqueous fluid catalyzes water–rock interaction and leads to the extraction of tin from tin-bearing minerals. All these findings support a hydrothermal origin for the tin deposits. In light of the geotectonic setting, petrochemical characteristics, and mineralizing physicochemical conditions of the Furong tin deposit, it is inferred that the ore-forming fluid of the Furong tin ore deposit could have derived from the Qitianling peralkaline intrusion.     

Spatio-temporal trends of heavy metals and source apportionment in Tolo Harbour,Hong Kong

This study provided a picture of the spatial and temporal distributions of Cr, Co, Ni Cu, Zn, As, Cd and Pb in bottom sediments of Tolo Harbour. The concentrations of the eight heavy metals differed significantly between sites due to the poor tidal flushing in Tolo Harbour. The levels of Cu, Zn, Cd and Pb were generally enriched in sediments from inner Tolo Harbour, while sediments from outer Tolo Harbour (Tolo Channel) had higher levels of Cr, Co and Ni. The redox sensitive element arsenic showed no distinct spatial pattern in Tolo Harbour. The decreasing levels of Cu, Zn, Pb and Cd in sediments with increasing distance from land demonstrated a typical diffusion pattern from land to the direction of sea. Two hot spots of Cu, Zn, Pb and Cd in sediments were located near Tai Po and Sha Tin new town, indicating that Cu, Zn, Pb and Zn were from land-derived sources. The sites with relatively high levels of Cr, Co and Ni in sediments were located in areas close to waste spoil in sea floor. The natural and anthropogenic inputs from Sha Tin and Tai Po to Tolo Harbour were mostly responsible for Cu, Zn, Cd and Pb enrichment in sediments from inner Tolo Harbour. The waste spoil in sea floor was believed to contribute to the Cr, Co and Ni in outer Tolo Harbour. The results of correlation coefficient between the eight heavy metals showed that Cu, Zn, Cd and Pb were strongly positively correlated, and Cr, Co and Ni were also significantly correlated with each other. The best explanation of strong correlation was their similar source. As, however, is not well correlated with the other seven heavy metals. The average concentrations of Cu and Zn displayed general increasing trends from 1978 to 2006 in Tolo Harbour, while the mean levels of Cr and Pb displayed a substantial decrease from 1978 to 1987, then a slight increase after 1987. No distinct temporal trends of the concentrations of Ni and As were observed from 1978 due to the inconsecutive data. On the other hand, the increasing trends of Cr, Cu, Zn, Cd and Pb were observed since 1996.     

Flow Characteristics of Cemented Paste Backfill

Cemented paste backfill (CPB) is primarily used for backfilling underground voids at George Fisher Mine (Mount Isa, Australia). The objective of this paper is to summarise the geotechnical characterisation of the tailings and the rheological properties of the CPB as determined from a laboratory testing program undertaken at James Cook University. Two binders were examined [a General Purpose cement and a slag blend cement] over a range of dosages from 0 to 6% and CPB mix solids content in the range of 72–78%. The slump tests were carried out using the standard cone (ASTM C 143) used for concrete and a cylinder with 110 mm (diameter) × 110 mm (height), whereas the yield stress was measured using a shear vane (Brookfield vane spindle V-73). The index characteristics of the tailings including the grain size distribution, liquid limit, plastic limit, specific gravity were determined as per ASTM standards. This paper will then discuss the interrelationships among the solid content, slump, saturated density and the yield stress of the CPB. It is shown that there is strong correlation between the two different slump test devices used in this study. The smaller cylindrical device appears to have good potential for slurries like mine tailings or dredged mud that have high water content for slump test. There is also strong inter-relationship among solid content, slump, yield stress, and bulk density. Increasing the solid content increases the bulk density and yield stress, but reduces the slump. While there is hardly any difference between the two binder types used in this study in terms of flow parameters, namely the yield stress and slump, the binder dosage has an effect. At any specific solid content, higher binder dosages lead to a drop in the slump and increase in the yield stress. The difference is more pronounced in dense slurries. It is also strongly believed that the trends and relationships developed in this study may be valuable for the other mining operations using CPB.     

A new locality of palygorskite-rich clay from the southeastern Yucatán: a potential material source for environmental applications

A palygorskite unit was discovered in a road cut of undifferentiated Tertiary limestone between the villages of El Pariso and San Roman (18°49.309N, 88°37.861W) in the southeastern Yucatán Peninsula, Mexico. This is the southern most locality of a clay-rich sedimentary unit reported in the literature for the Tertiary carbonates of the Yucatán Peninsula. This occurrence indicates a much wider range of palygorskite-rich clay deposition than previously recognized. The lithology is 99% clay and 1% sand to silt size diagenetic quartz grains. The clay consists of approximately 85% palygorskite, 15% montmorillonite and trace amounts of titanium oxides. EDS analyses on palygorskite are largely consistent with sedimentary palygorskites from other coastal marine settings, however palygorskite has a low total Fe content (average = 0.40 wt% expressed as Fe₂O₃) compared to many other sedimentary palygorskites. Montmorillonite chemical compositions are typical and compared to the palygorskite have substantially higher Fe₂O₃ concentrations (average = 3.90 wt%). The low percentage of coarse grains in the lithology combined with a high proportion of palygorskite and lack of detrimental trace minerals suggest the deposit is of industrial grade; however, it has limited reserves (6,000 m³). The unit could be potentially used in a wide array of environmental applications which are needed in the region including liners for landfills and constructed wetlands. The unit is in a geographic location which would serve the expanding economy of the region. This resource has the potential to have great impact on the quality of the local environment and the economy of a region under great environmental threat.     

Variational Bayesian independent component analysis for spectral unmixing in remote sensing image

Spectral unmixing is a key technology of optical remote sensing image analysis; it not only influences the accuracy of the extraction of land cover information and automatic classification of topographical objects, but also greatly hinders the development of quantitative remote sensing. Independent component analysis (ICA) is a statistical method which is recently developed to extract the independent linear components, and which can realize the extraction of endmembers as well as fractional abundances with little a priori knowledge. However, ICA still cannot process the correlations among the various components. To overcome this problem, variational Bayesian independent component analysis (VBICA) has been proposed to process optical remote sensing images. In the Bayesian framework, the separation of independent components of remote sensing image has finally been achieved with conditional independence standards of Bayesian network and approximate variational algorithm. In the simulative image and real AVIRIS hyperspectral remote sensing image, the VBICA algorithm demonstrates its better performance. The experiment’s results indicate that the proposed VBICA algorithm is feasible, which has obvious advantages and a good application prospect. The reason is that it can effectively overcome the correlations between the various components in remote sensing images and break through the limitations of traditional remote sensing images analysis. Last but not least, the VBICA algorithm is applied in the classification of the TM multispectral remote sensing images. Compared to basic maximum likelihood classification, principal component analysis and FastICA algorithms, VBICA improves the classification accuracy of remote sensing images, and contributes to the further extension of the application of ICA in remote sensing image analysis.     

SPI-based evaluation of drought events in Xinjiang, China

Daily precipitation data for 1957?C2009 from 53 stations in the Xinjiang, China, are analyzed, based on the Standardized Precipitation Index (SPI) with the aim to investigate spatio-temporal patterns of droughts. The Mann?CKendall trend test is used to detect the trends in the SPI values of monthly drought series, drought severity and drought duration. The frequencies of moderate, severe and extreme droughts are higher in the North Xinjiang, while mild droughts occur more often in the South Xinjiang. A decreasing frequency of droughts in the North Xinjiang is found in winter, but a drying tendency is detected in the western parts of the North Xinjiang during spring, summer and autumn, which may be harmful for agriculture. The South Xinjiang seems to be getting wetter in summer, while the south parts of the South Xinjiang seem to be getting drier in spring. The middle of the East Xinjiang is identified to be in a slightly dry tendency. The drought severity is decreasing and drought duration is getting shorter in the North Xinjiang, while both of them increase in the southern parts of the South Xinjiang. In addition, droughts in the middle parts of the East Xinjiang are intensifying.     

The early Miocene (~25 Ma) volcanism in the northern Kyushu-Palau Ridge,enriched mantle source injection during rifting prior to the Shikoku backarc basin opening

The northern Kyushu-Palau Ridge (KPR), remnant conjugate arc of the Izu-Ogasawara (Bonin)-Mariana (IBM) active arc, is dominated by basalt-andesite except for the Komahashi-Daini Seamount where acidic plutonic rocks of 38 Ma were recovered. These mafic to intermediate volcanics are produced by the rifting volcanism in the proto-IBM arc associated with spreading of the Shikoku Basin. The HFSE and HREE contents and ratios of these volcanics indicate enriched source mantle composition compared to recent volcanic front. The LILE ratios exhibit similar characteristics to reararc volcanism of the recent Izu arc, and some enriched volcanics exhibit high abundance of sediment melt inputs. Based on these observations and compilations of the published data set, the replacement event of the wedge mantle under the IBM arc occurred two times. The first event occurred between 45 and 38 Ma, with Pacific type mantle being replaced by depleted Indian type mantle. The second event occurred between 36 and 25 Ma, enriched mantle flowed from reararc side. The slab component during the proto-IBM arc rifting was a similar characteristic to recent reararc volcanism of the Izu arc, and sediment melt added in a local area.     

Mineralogy and chemical composition of the clay fraction of Neogene shales from the Surma Group in the Bengal basin,Bangladesh

Mineralogical and chemical investigations (<2μm clay separates) of shale samples from the Neogene-age Surma Group obtained from four wells (Habiganj-11, Shahbazpur-1, Titas-11, Titas-15) in the Bengal basin, Bangladesh, were carried out in order to reveal the clay mineral composition as reservoir exploration and exploitation requires a good understanding of the clay minerals. The samples were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) and X-Ray fluorescence spectrometry (XRF). Mineralogically, the sub-surface Surma Group shales comprise predominantly quartz, plagioclase, illite, chlorite, kaolinite, with lesser amounts of K-feldspar, dolomite and smectite, and minor to trace amounts of calcite, siderite and pyrite. The chemical composition of the <2 μm clay separates also suggests an illite and chlorite-rich composition. With increasing burial depth, the Surma Group shales are enriched in illite. The gradual decreasing of the smectite clays with depth and ultimate disappearance at greater depths (≥ 3000 m) may have been responsible for the presence of the diagenetic illite. Based on the mineralogical composition it is most likely that the illite-chlorite associations together with quartz and feldspar were predominantly detrital in origin and thus reflect the presence of a rapidly-rising source terrain not subjected to intense weathering.     

Citizens as sensors: the world of volunteered geography

In recent months there has been an explosion of interest in using the Web to create, assemble, and disseminate geographic information provided voluntarily by individuals. Sites such as Wikimapia and OpenStreetMap are empowering citizens to create a global patchwork of geographic information, while Google Earth and other virtual globes are encouraging volunteers to develop interesting applications using their own data. I review this phenomenon, and examine associated issues: what drives people to do this, how accurate are the results, will they threaten individual privacy, and how can they augment more conventional sources? I compare this new phenomenon to more traditional citizen science and the role of the amateur in geographic observation.