影响华东地区热带气旋年频数与热带对流场的关系

利用由美国NOAA系列卫星观测的OLR资料研究了影响华东地区热带气旋年频数（记为ATC）与热带对流场的关系，结果表明两者存在密切的联系：（1）当华东地区热带气旋年频数ATC为异常偏多（少）时，ITCZ位置累积距平为正（负）值，即ITCZ位置异常偏北（南）；（2）利用OLR设计了Walker综合指数WI，该指数的强弱可以反映ATC的异常情况，即当ATC为异常偏多（少）时，walker环流圈异常强（弱）；（3）OLR距平累积量场能较好的表征ATC异常年份所对应的低纬度及中高纬地区大气环流的配置，其可以作为预测影响华东地区热带气旋年频数的强信号。     

长江三角洲地区水和热通量的时空变化特征及影响因子

文中利用改进的K B模式和牛顿扩散方法及 196 1年以来的长江三角洲 (2 8～ 33°N ,118～ 12 3°E)地区的 4 8个测站的常规气象资料 ,估计了该地区近 4 0a来的蒸散量和感热通量。结合该地区的气温、太阳辐射等气候资料和 196 0年以来该区域土地资源利用变化等有关信息对该地区的潜热通量和感热通量的时 空间变化特征及其可能成因进行了综合分析。结果认为该地区自 2 0世纪 70年代开始平均蒸散量有逐渐减小的趋势 ,与 1980年相比 ,1998年区域年平均蒸散量减小了 2 4mm。区域平均感热通量与蒸散量相比在此期间变化并不明显。通过对该地区的云量、太阳辐射及土地利用变化资料分析认为 ,造成该地区平均蒸散量减少趋势的的原因之一是用于蒸发的能量即太阳辐射的减少 ,而造成太阳辐射减少的可能原因为云量及大气透明度的变化所至 ;原因之二是该地区地表覆盖条件的改变。近 2 0a来 ,该地区的水田、旱地及水域面积占总面积的比率分别减少 1.35 3% ,4 .4 4 2 %和2 .5 97% ,而城镇建设、工矿及其它建设用地面积则增加 3.345 %。耕地及水面的减小和城镇及建设用地面积的增加从整体上使区域平均蒸发量减少。     

VBA的开发

介绍了能够加强Ms Office功能的二次开发工具VBA语言，以及VBA的特点与优点；介绍了在Visul Basic中利用VBA的强大功能来实现具有Office界面、功能的方法。     

青藏高原近地面层微气象学特征

利用1998年5月-7月在改则、当雄和昌都三测站获得的近地面层气象要素变化的观测资料，分析了青藏高原近地面层风速、温度和湿度日变化特征及廓线规律，发现高原近地面层微气象学特征具有自己的特点；同时还讨论了高原近地面层白天出现的逆湿现象。     

显式自由表面模型时间分裂格式的一个积分方案

讨论了有关显式自由表面模型的时间分裂格式中的分裂误差。在传统的积分方案中，由于采用蛙跳格式，斜压动量方程具有三层的时间离散结构，但是，正压动量方程在相应的时间层上只有二层的离散结构。因此，正压方程与斜压方程的时间离散结构是不相容的。分析结果表明，这是导致分裂误差的原因。本提出一种能保持时间离散结构相容的正压和斜压方程的时间积分方案。该积分方案的分裂误差很小因此特别适合于需要长期积分的气候研究。该方案在北太平洋的一个自由表面模型中得到了应用。     

Simulation of the east asian summer monsoon using a variable resolution atmospheric GCM

The East Asia summer monsoon (EASM) is simulated with a variable resolution global atmospheric general circulation model (GCM) developed at the Laboratoire de Météorologie Dynamique, France. The version used has a local zoom centered on China. This study validates the model's capability in reproducing the fundamental features of the EASM. The monsoon behaviors over East Asia revealed by the ECMWF reanalysis data are also addressed systematically, providing as observational evidence. The mean state of the EASM is generally portrayed well in the model, including the large-scale monsoon airflows, the monsoonal meridional circulation, the cross-equatorial low-level jets, the monsoon trough in the South China Sea, the surface cold high in Australia, and the upper-level northeasterly return flow. While the performance of simulating large-scale monsoonal climate is encouraging, the model's main deficiency lies in the rainfall. The marked rainbelt observed along the Yangtze River Valley is missed in the simulation. This is due to the weakly reproduced monsoonal components in essence and is directly related to the weak western Pacific subtropical high, which leads to a fragile subtropical southwest monsoon on its western flank and results in a weaker convergence of the southwest monsoon flow with the midlatitude westerlies. The excessively westward extension of the high, together with the distorted Indian low, also makes the contribution of the tropical southwest monsoon to the moisture convergence over the Yangtze River Valley too weak in the model. The insufficient plateau heating and the resulting weak land-sea thermal contrast are responsible for the weakly reproduced monsoon. It is the deficiency of the model in handling the low-level cloud cover over the plateau rather than the horizontal resolution and the associated depiction of plateau topography that results in the insufficient plateau heating. Comparison with the simulation employing regular coarser mesh model reveals that the local zoom technique improves, in a general manner, the EASM simulation.     

X射线衍射峰五基本要素的物理学意义与应用

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。     

Origin of a large breccia-vein system in the Sanerlin uranium deposit, southern China: a reinterpretation

The early Tertiary Sanerlin uranium deposit is located near the southwestern margin of the Chaling-Yongxing pull-apart basin defined by the Chaling-Yongxing and Chenxian-Linwu sinistral strike-slip faults in southern China. The uranium ores are hosted in 15 breccia-vein bodies, which are separately located in the cores of three secondary anticlines of the Upper Permian Dangchong Formation. Individual breccia-vein bodies are composed of fragments of silicified shale and sandstone from the Dangchong Formation, and quartz veinlets as cements. These fragments, together with quartz veins, form a mosaic texture. Hydrothermal pitchblende is the only commercial uranium mineral, mainly occurring as disseminated grains within quartz veins or coating fragments. Other metallic minerals include molybdenite, pyrite, chalcopyrite, galena, sphalerite, and red microcrystalline hematite. Fluid inclusions in quartz veins have homogenization temperatures ranging from 150 to 280 °C, and calculated salinity values between 5.6 and 13.4 wt% NaCl equivalent. Stable isotope analyses show that the mineralizing fluid was characterized by '¹⁸O values of -2.2 to +2.6‰ and 'D_H2O values of -134 to -110‰. These analytical data demonstrate that hydrothermal fluids were mainly derived from formation waters (brines) of the Chaling-Yongxing basin. Fluid overpressuring was caused by an abnormal geothermal gradient and impermeable shales in the deposit area. The geometry, texture, and structure of the breccia-vein system, along with the fluid pressure estimates, suggest that hydraulic fracturing generated the mineralized breccia-vein system. Pitchblende and associated minerals were deposited when gaseous phases were released abruptly from the ore fluids due to the hydraulic fracturing.