喀喇昆仑山西北部冰川运动速度地形控制特征

为了探讨地形和海拔对冰川季节和年平均运动速度的影响程度,利用2013-2018年GoLive数据与ASTER GDEM V2数据对喀喇昆仑山西北部3 389条冰川的地形（坡度、坡向、海拔）和冰川运动速度进行了综合分析。结果表明：冰川表面运动速度在物质平衡线处（3 970~4 770 m）达到最快,是冰川积极维持物质平衡的一种体现。坡度平缓地区在不同海拔下的冰川运动速度有明显的差别,但是不同坡度地区的冰川运动速度随海拔变化的趋势基本一致,均呈现先增大后减小。北坡冰川运动速度较平稳,南坡和西南坡的冰川运动速度（均为0.25 m·d^-1）最快并且变化幅度较大,最小值与最大值相差近4倍。冰川运动速度不是呈现单一的季节性变化,同时还会受到地形的控制。低海拔区域冰川运动速度在消融期（3-6月）较快,中海拔区域在消融前（11月至次年2月）较快。     

川西甲基卡花岗伟晶岩型锂矿床中熔体、流体包裹体固相物质研究

川西甲基卡二云母花岗岩和伟晶岩内发育大量原生熔体包裹体和富晶体流体包裹体。为了查明甲基卡成矿熔体、流体性质与演化特征,运用激光拉曼光谱和扫描电镜鉴定了甲基卡花岗伟晶岩型锂矿床中二云母花岗岩及伟晶岩脉不同结构带内的原生熔体、流体包裹体的固相物质。分析结果表明,甲基卡二云母花岗岩石英内熔体包裹体的矿物组合为磷灰石+白云母、白云母+钠长石、白云母+石墨;伟晶岩绿柱石内富晶体流体包裹体的矿物组合主要为刚玉、富铝铁硅酸盐+刚玉+锂辉石、锂辉石+石英+锂绿泥石;伟晶岩锂辉石内富晶体流体包裹体的矿物组合主要为磷灰石、锡石、磁铁矿、石英+钠长石+锂绿泥石、萤石、富钙镁硅酸盐+富铁铝硅酸盐+富铁硅酸盐+石英;花岗岩浆熔体与伟晶岩浆熔体(流体)具有一定的差异,成矿熔体、流体成分总体呈现出碱质元素(Na、Si、Al)、挥发分(F、P、CO_2)含量增高及基性元素(Fe、Mg、Ca)降低的特征;包裹体中子矿物与主矿物的化学成分具有一定的差别,揭示出伟晶岩熔体(流体)存在局部岩浆分异作用,具不混溶性及非均匀性。因此认为,伟晶岩熔浆(流体)为岩浆分异与岩浆不混溶共同作用的产物,挥发分含量的增高(F、P、CO_2)使伟晶岩能够与稀有金属组成各类络合物或化合物,这对于稀有金属成矿起到了至关重要的作用。     

基于假三元模型的透辉石-硬玉固溶体热力学性质计算

自然界中矿物多以固溶体形式存在,据其晶体化学特征计算热力学性质是开展矿物成因理论研究的基础。本文引入描述二元矿物固溶体热力学性质的假三元模型,计算得到了透辉石-硬玉固溶体系列的热力学性质。该模型通过构造一种高度有序的中间相,同时考虑长程和短程有序效应,基于热力学平衡态矿物固溶体自由能最低的规律,可以计算特定组分下矿物的平衡自由能、焓和熵等热力学参数。本文针对透辉石-硬玉固溶体体系,取绿辉石为其中间有序态,计算了其活度-成分关系和温度-组分相图等,发现绿辉石随温度升高的有序无序相变为一级相变,相变温度为1 148±25 K,与实验研究结果一致。本文获得的透辉石-绿辉石-硬玉体系的热力学参数可用于视剖面图方法研究MORB成分的岩石的榴辉岩相变质作用过程。     

珠江三角洲平原区土壤Pb元素地球化学特征及其影响因素研究

以珠江三角洲平原为研究区域,对其7个区县102件水稻根系土样品进行土壤理化参数及Pb形态分析,探讨在第四系分布区土壤Pb全量及Pb活动态含量的特征及影响因素。结果表明:全部供试土壤样品中Pb元素平均含量为46.47mg/kg,略高于广东省土壤Pb含量背景值(36mg/kg),表现出一定的累积趋势。研究区自西北陆相沉积区至南部海陆交互相沉积区,元素含量增高。Pb元素主要以残渣态和铁锰氧化物形态赋存在土壤中,迁移能力弱。影响土壤Pb全量的因素主要有Al2O3、K2O、Tl、Mo;影响土壤Pb活动态的因素有Pb全量、pH、有机质、CEC、P、TFe2O3、Mn;其中,p H是控制Pb元素活动性的最主要因素。     

Fluid Characteristics and Evolution of the Zhawulong Granitic Pegmatite Lithium Deposit in the Ganzi‐Songpan Region,Southwestern China

The Zhawulong granitic pegmatite lithium deposit is located in the Ganzi-Songpan orogenic belt. Fluid inclusions in spodumene and coexisting quartz were studied to understand the cooling path and evolution of fluid within albite–spodumene pegmatite. There are three distinguishable types of fluid inclusions: crystal-rich, CO2–NaCl–H2O, and NaCl–H2O. At more than 500°C and 350~480 MPa, crystal-rich fluid inclusions were captured during the pegmatitic magma-hydrothermal transition stage, characterized by a dense hydrous alkali borosilicate fluid with a carbonate component. Between 412°C and 278°C, CO2–NaCl–H2Ofluid inclusions developed in spodumene (I) and quartz (II) with a low salinity (3.3–11.9 wt%NaCl equivalent) and a high volatile content, which represent the boundary between the transition stage and the hydrothermal stage. The subsequentNaCl–H2Ofluid inclusions from the hydrothermal stage, between 189°C and 302°C, have a low salinity (1.1–13.9 wt%NaCl equivalent). The various types of fluid inclusions reveal the P–T conditions of pegmatite formation, which marks the transition process from magmatic to hydrothermal. The ore-forming fluids from the Zhawulong deposit have many of the same characteristics as those from the Jiajika lithium deposit. The ore-forming fluid provided not only materials for crystallization of rare metal minerals, such as spodumene and beryl, but also the ideal conditions forthe growth of ore minerals. Therefore, this area has favorable conditions for lithium enrichment and excellent prospecting potential.     

Geological and Fluid Inclusion Constraints on Gold Deposition Processes of the Dayingezhuang Gold Deposit,Jiaodong Peninsula,China

The Dayingezhuang gold deposit, hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China, contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone. The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type (i.e., disseminated and veinlet) mineralization. Mineralization and alteration are structurally controlled by the NE- to NNE-striking Linglong detachment fault. The mineralization can be divided into four stages: (K-feldspar)–pyrite–sericite–quartz, quartz–gold–pyrite, quartz–gold–polymetallic sulfide, and quartz–carbonate, with the majority of the gold being produced in the second and third stages. Based on a combination of petrography, microthermometry, and laser Raman spectroscopy, three types of fluid inclusion were identified in the vein minerals: NaCl–H2O (A-type), CO2–H2O–NaCl (AC-type), and pure CO2 (PC-type). Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions, with rare PC-type inclusions. These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt% NaCl equivalent. Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions, with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt% NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt% NaCl equivalent for the third stage. In contrast, quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions, with minor occurrences of AC-type inclusions; these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt% NaCl equivalent. Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and fO2 in the early stages, to Au(HS)2– under neutral-pH conditions at lower temperatures and fO2 in the later stages. The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.     

The Sedimentological Knowledge Tree:Significance,Method and Progress

正On the platform of the Deep-time Digital Earth Program(DDE),sedimentary data are essential for achieving its scientific objectives.These data will take stratigraphic units as their core data carrier,for quantitative or qualitative data analysis.The DDE Sedimentary Data Group is responsible for the management of the sedimentary data on the DDE platform and has now developed into a group of nearly 40 disciplinary experts.This groups main tasks are constructing sedimentary knowledge     

Sedimentological/Palaeogeographic Data as Fundamental Building Blocks of the DDE Project:Critical Underpinning of Reconstructing Deep-time Earth Systems

正1 Introduction Sedimentary rocks archive important information for understanding how the earth system operates and how life and environments have evolved through earth history.Properly identifying characteristics of sedimentary rocks,along with the subsequent interpretation of depositional processes and sedimentary environments in a basin or locality,are fundamental to inter-basinal correlation of sedimentary successions as well as to understanding and deconvolving regional and global processes     

渤海湾盆地黄骅坳陷古潜山的宏观展布特征与演化过程

古潜山的形成与发育受控于多期构造运动,在不同构造背景下所表现出的结构形态是有规律可循的,呈现出成群、成带分布的现象。本文以黄骅坳陷潜山宏观展布特征为研究重点,利用三维地震资料,解剖潜山结构特征,探讨潜山的演化过程。研究表明,黄骅坳陷古潜山可分为基岩褶皱形成的潜山背斜群、基底断块掀斜作用形成的大型断鼻和盆缘裙边断鼻潜山构造三大类潜山。歧口凹陷内部潜山构造带总体构成"轮毂"式格局,沧东-盐山断陷区潜山带结构整体性强,以大型背斜构造为主。基底逆掩断裂系统复杂化潜山构造带内幕结构,可分为三角逆冲构造、背驮式逆冲构造及双重构造等。三大拆离伸展构造系统控制掀斜断块潜山的分布,形成以断鼻和断垒构造为主的潜山构造群。黄骅坳陷古潜山分为四个主要演化阶段:中元古代至古生代末为潜山内幕地层建造阶段,中生代为潜山内幕构造发育阶段,新生代古近纪为潜山宏观面貌定型阶段,新近纪为潜山深埋阶段。