岩石水压致裂和诱发地震的实验研究

用7种岩石各制备了几类不同预裂纹的系列试件，并在不同围压下进行水压致裂强度实验。结合典型的水库诱发地震的实际资料和现今构造应力场的实验结果，以及应用岩石强度理论和岩石断裂力学的一些原理、方法，进行岩石孔隙水压诱发地震的探讨。初步结果为：(1)若岩体内构造应力很小，一定大小的孔隙水压力σp，可直接使岩体内的薄弱面致裂并发生小地震。(2)若构造应力较大，存在两类诱发地震的可能：①对岩体浅部一些走向与构造应力的主压应力σ1方向相近的薄弱面，σp可促使其发生张性破裂并诱发小地震。②当构造应力接近于断裂的抗剪强度时，因σp，降低了断裂面上的正应力σn，使原处于稳定状态的断裂失稳，发生滑移破裂并诱发出地震。σp导致断裂的破裂深度增大，使诱发地震的震级大于原潜在的地震震级。(3)各种岩体均存在着一个极限深度，此深度后不再有诱发地震。     

合肥盆地钻井地层的同位素测年与地层划分

合肥盆地内部中、新界地层大面积被第四系覆盖，其地层的时代与划分主要依赖已有的6口深井地层资料。由于缺乏可靠的化石记录，这6口深井地层时代与划分一直存在着很大的分歧，制约了对该盆地的油气勘探与远景评价。本文利用这6口深井泥岩类岩屑中自生伊利石，在其结晶度分析基础上，进行了K-Ar同位素测年，成功地获得了不同深度上的地层形成时代。据此地层年龄，文中对这6口深井所钻遇的地层进行了重新的划分。     

(40)~Ar/(39)~Ar chronology and geochemistry of high-K volcanic rocks in the Mangkang basin, Tibet

Our two newly obtained high-quality 40Ar/39Ar ages suggest that the high-K volcanic rocks of the Lawuxiang Formation in the Mangkang basin, Tibet were formed at 33.5±0.2 Ma. The tracing of elemental and Pb-Sr-Nd isotopic geochemistry indicates that they were derived from an EM2 enriched mantle in continental subduction caused by transpression. Their evidently negative anomalies in HFSEs such as Nb and Ta make clear that there is an input of continental material into the mantle source. The high-K rocks at 33.5±0.2 Ma in the Mangkang basin may temporally, spatially and compositionally compare with the early one of two-pulse high-K rocks in eastern Tibet distinguished by Wang J. H. et al., implying that they were formed in the same tectonic setting.     

Characteristics and genesis of maghemite in Chinese loess and paleosols: Mechanism for magnetic susceptibility enhancement in paleosols

Morphological characteristics and microstructures of magnetic minerals extracted from Chinese loess and paleosols were investigated using powder X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). Our results indicate that maghemite in loess–paleosol sequences was transformed from magnetite through oxidation of magnetite. Maghemite transformed from eolian magnetite during chemical weathering has low-angle grain boundaries among maghemite nano-crystals. Some nano-crystalline maghemites with nanoporous texture resulted from microbe-induced precipitation of magnetite or transformation of poorly crystalline ferric Fe (oxy)hydroxides in presence of Fe-reducing bacteria. Aggregates of euhedral maghemite nano-crystals were transformed from magnetite magnetosomes. Both microbe-induced nanoporous magnetite and microbe-produced magnetite magnetosomes are directly related to microbial activities and pedogenesis of the paleosols. It is proposed that the formation of nano-crystalline maghemite with superparamagnetic property in paleosol results in the enhancement of magnetic susceptibility, although the total amount (weight percent) of magnetic minerals in both paleosol and loess units is similar. Our results also show that nano-crystalline and nanoporous magnetite grains prefer to transform into maghemite in semi-arid soil environments instead of hematite, although hematite is a thermodynamically stable phase. This result also indicates that a decrease in crystal size will increase stability of maghemite. It is also inferred that surface energy of maghemite is lower than that of hematite.     

Land degradation in the source region of the Yellow River, northeast Qinghai-Xizang Plateau: classification and evaluation

Land degradation imposes a great threat to the world. It is not merely an environmental issue, but also a social and economic problem. Land desertification is among the main aspects of environment changes in the source region of the Yellow River. Previous studies focused on water resource utilization and soil erosion, but land degradation in the source region of the Yellow River even the whole Qinghai-Xizang Plateau received little attention. Based on the data obtained by field investigation and TM satellite images of 2000, this study provides the classification and evaluation information of the land degradation in the source region of the Yellow River. There are six types of land degradation in this region: water erosion in the northern mountains around the Gonghe Basin, sandy desertification in the Gonghe Basin and Upland Plain Area, aridization in the lower reaches, salinization in the Gonghe Basin, vegetation degradation in the intramontance basin and freezing and thawing erosion in the high mountains. The total degraded area is 34,429.6 km², making up 37.5% of the land in the study area. Finally, land degradation in the source region of the Yellow River was evaluated according to changes in the physical structure and chemical component of soils, land productivity, secondary soil salt and water conditions.     

Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.     

“雪龙号”2003北极航次气相多环芳烃纬度分布观测

2003年“雪龙号”北极科学考察期间,对沿途海洋大气进行采样,分析其中气相多环芳烃的空间分布。结果显示,气相中主要是2-4环的多环芳烃,其中菲为主要的化合物,平均占到总多环芳烃的55.1%。在整个航程的广泛区域尺度内,气相总多环芳烃浓度在1043.9-92993.1pg/m3。空间分布上,远东亚的海面>北太平洋海面>北极圈以内海面;总多环芳烃的浓度随纬度升高呈现显著降低的趋势。通过Clausius-Clapeyron方程对浓度和温度相互关系的分析表明,温度是控制气相多环芳烃长距离传输的主要因素。     

The influence of coupled physical swelling and chemical reactions on deformable geomaterials

Coupled thermo‐hydro‐mechanical‐chemical modelling has attracted attention in past decades due to many contemporary geotechnical engineering applications (e.g., waste disposal, carbon capture and storage). However, molecular‐scale interactions within geomaterials (e.g., swelling and dissolution/precipitation) have a significant influence on the mechanical behaviour, yet are rarely incorporated into existing Thermal‐Hydro‐Mechanical‐Chemical (THMC) frameworks. This paper presents a new coupled hydro‐mechanical‐chemical constitutive model to bridge molecular‐scale interactions with macro‐physical deformation by combining the swelling and dissolution/precipitation through an extension of the new mixture‐coupling theory. Entropy analysis of the geomaterial system provides dissipation energy, and Helmholtz free energy gives the relationship between solids and fluids. Numerical simulation is used to compare with the selected recognized models, which demonstrates that the swelling and dissolution/precipitation processes may have a significant influence on the mechanical deformation of the geomaterials.     

A numerical study of mechanical behavior of a cement paste under mechanical loading and chemical leaching

Based on relevant experimental data of a petroleum cement paste under mechanical loading and chemical leaching, an elastic‐plastic model is first proposed by taking into account plastic shearing and pore collapse. The degradation of mechanical properties induced by the chemical leaching is characterized by a chemical damage variable which is defined as the increase of porosity. Both elastic and plastic properties of the cement paste are affected by the chemical damage. The proposed model is calibrated from and applied to describe mechanical responses in triaxial compression tests respectively on sound and fully leached samples. In the second part, a phenomenological chemical model is defined to establish the relationship between porosity change and calcium dissolution process. The dissolution kinetics is governed by a diffusion law taking into account the variation of diffusion coefficient with calcium concentration. The chemical model is coupled with the mechanical model, and both are applied to describe mechanical response of cement paste samples subjected to progressive chemical leaching and compressive stresses. Comparisons between experimental data and numerical results are presented.