遥感筛选评价区化异常的初步探索

近年来,作者发展了七种以上重要找矿指示元素的野外快速分析法,此乃其一。文中提出一种新的金样冷浸技术,引进了新的光导光度检测方法,样品经溴化钠—硫酸—过氧化氢冷浸,用经丙酮—MIBK处理的泡沫塑料富集金,经混合解脱剂解脱并直接取解脱液用改进的微珠析出法或用光导光度法测定。取10g样品,可测定0．0005- 50g/t范围内的金。方法简便、快速,可在普查分队驻地进行,每一工作日可测定80多个样品,由于废弃了王水分解样品和泡沫塑料的灰化,具有广阔的应用前景。     

Plio-Quaternary geodynamic evolution of a segment of the Peruvian Andean Cordillera located above the change in the subduction geometry: the Cuzco region

The Cuzco region, which is located above a change in subduction geometry, appears to be characterized by a variable Plio-Quaternary tectono-sedimentary evolution essentially located along the major fault system that separates the High Plateaux from the Eastern Cordillera. After the higher surface formation of the High Plateaux, a set of Neogene basins were filled by Miocene “ fluvio-torrential” series and by Plio-Pleistocene fluvio-lacustrine deposits. The Neogene series have been affected by compressional tectonic forces attributed to the Late Miocene. This compression is followed by roughly E-W trending syn-sedimentary extensional tectonics attributed to the Pliocene; it is related to reactivation of the pre-existing major faults, basin evolution, and volcanic activity concentrated along the faults. In the Early Pleistocene, fluvio-lacustrine deposits are affected by syn- and post-sedimentary compressional tectonism it is characterized by shortening that trends both N-S and E-W and produces folding and faulting of the sedimentary cover. Extensional tectonism trending roughly N-S has been taking place from the Middle Pleistocene to the Present; it is coeval with shoshonitic volcanic activity, and with sedimentation of fluvio-lacustrine terraces, torrential fans and moraines. Quaternary and active normal faults due to this tectonism, are located in a narrow zone more than 100 km-long between the High Plateaux and the Eastern Cordillera, and two 15 km-long fault sectors in the Eastern Cordillera. Characteristic Pleistocene scarps, 400 m or more high, are due to the cumulative normal offset, and there are also little scarps, with heights ranging between 2 and 20 m, which are related to Holocene fault reactivations. Recent fault reactivation on the Cuzco fault system, during the April 5, 1986 earthquake (m_b = 5.3), is due to the N-S trending extension. This state of stress, located at a mean elevation of roughly 3730 m, is generally homogeneous to different scales. The active Cuzco normal faults may be a consequence of adjustment between the compensated Western Cordillera and the undercompensated Eastern Cordillera, this latter being uplifted higher than its isostatic equilibrium due to compression acting on its eastern edge. The variation of the state of stress, during the Plio-Quaternary is in agreement with the variations of the compressional boundary forces. It may be explained by variation of the convergence rate or by the variation of pull-slab forces.     

茂兴地区杨大城子油层砂体沉积环境特征及分析

在对岩心详细观察的基础上，通过时研究区杨大城子油层沉积物的结构、构造、颜色、组合韵律、垂向序列、电性响应、砂体平面展布特征的综合分析，认为研究区杨大城子油层总体上是－套河流相沉积。作为油气储集层的砂体主要是点坝砂体。     

The “peeling” method to process apparent resistivity data for earthquake precursory monitoring

Considering the fact that there is only one pair of fixed potential poles in one direction used to monitor the resistivity changes under the observatory station which may indicate process of earthquake preparation, based on the precondition that the resistivity structure is 1-dimensional under the observatory station, and by way of equivalent model put forward by the authors, this paper suggests a kind of method trying to separate the resistivity changes in deep layers from that of the shallow layer. Analysis shows that, to obtain the same measured data with the same array, any a multi-layered geo-electrical structure can be equivalently taken as a two-layered one, we call it equivalent model. In this paper, the resistivity and thickness of the upper layer of the equivalent model are equal to that of the first layer of the original one, the resistivity of the lower layer of the equivalent model is obtained with calculation according to the requirement of equivalence, its value is relevant with the resistivities and thicknesses of all layer of the original model except for the first one, so the resistivity change of the equivalent layer can indicate the synthetic effect of variation of all layers of the original model except for the first one. The primary research results show that this method can work well. Foundation item: Chinese Joint Seismological Science Foundation (100146).     

黄土场地覆盖层厚度和地形条件对地震动放大效应的影响

针对黄土地区场地条件的特点分析研究了场地覆盖层厚度和地形因素对地 震动放大效应的影响规律。通过对大量实际算例的归纳统计,给出了一种定量评价场 地覆盖层厚度及地形因素影响的经验方法。为黄土地震灾害预防及减轻技术研究提 供了参考依据。     

Influence of magnetic fabric anisotropy on seismic wave velocity in paramagnetic granites from NW Himalaya: Results from preliminary investigations

Anisotropy of Magnetic Susceptibility (AMS) and seismic wave velocity studies of some paramagnetic Himalayan granitoids show good correlation between magnetic fabric anisotropy and P wave velocity (Vp). Vp shows strong positive correlation with magnetic lineation (L) and degree of magnetic anisotropy (P′) having correlation coefficient (r) values of 0.93 and 0.89 respectively. Both Vp and Vs show positive correlation with the SiO₂ content of Proterozoic and Paleozoic granitoids. Velocity of S wave (Vs) shows negative correlation with mean magnetic susceptibility (K_m) having ‘r’ value of 0.86. The correlation between Vs-K_m, V_p-P′, V_p-L also shows >95% probability in Spearman’s rank correlation. Based on the results from the present sample size it is suggested that, in paramagnetic granites, V_p is proportional to intensity of deformation and preferred orientation of minerals as well as the mineralogy. On the other hand, Vs is more dependent on the mineralogy alone.     

Structural and stratigraphical constraints on the kinematics history of the Southern Tan–Lu Fault Zone during the Mesozoic Anhui Province, China

The Tan–Lu Fault Zone (TLFZ) extends in a NNE–SSW direction for more than 2000 km in Eastern China. It has been considered either as a major sinistral strike-slip fault, as a suture zone or as a normal fault. We have conducted a structural analysis of the southern segment of this fault zone (STLFZ) in the Anhui Province. The ages (Triassic to Palaeocene) of the formations affected by the faults have been re-appraised taking into account recent stratigraphical studies to better constraint the ages of the successive stages of the kinematics of the STLFZ. Subsequently, the kinematics of the faults is presented in terms of strain/stress fields by inversion of the striated fault set data. Finally, the data are discussed in the light of the results obtained by previous workers.We propose the following history of the STLFZ kinematics during the Mesozoic. At the time of collision, a  NNE orientated Tan–Lu margin probably connected two margins located north of the Dabie and Sulu collision belts. During the Middle–Late Triassic, the SCB has been obliquely subducted below the NCB along this margin which has acted as a compressional transfer zone between the Dabie and Sulu continental subduction zones. The STLFZ has been initiated during the Early Jurassic and has acted as a sinistral transform fault during the Jurassic, following which the NCB/SCB collision stopped. A  NW-trending extension related to metamorphic domes was active during the basal Early Cretaceous ( 135–130 Ma); it has been followed by a NW–SE compression and a NE–SW tension during the middle–late Early Cretaceous ( 127 to  105 Ma, possibly  95 Ma); at that time the TLFZ was a sinistral transcurrent fault within the eastern part of the Asian continent. During the Late Cretaceous–Palaeocene, the STLFZ was a normal fault zone under a WNW–ESE tension.     

Experimental and analytical study on design performance of full-scale viscoelastic dampers

Viscoelastic (VE) dampers, with their stiffness and energy dissipation capabilities, have been widely used in civil engineering for mitigating wind-induced vibration and seismic responses of structures, thus enhancing the comfort of residents and serviceability of equipment inside. In past relevant research, most analytical models for characterizing the mechanical behavior of VE dampers were verified by comparing their predictions with performance test results from small-scale specimens, which might not adequately or conservatively represent the actual behavior of full-scale dampers, especially with regard to the ambient temperature, temperature rise, and heat convection effects. Thus, in this study, by using a high-performance testing facility with a temperature control system, full-scale VE dampers were dynamically tested with different displacement amplitudes, excitation frequencies, and ambient temperatures. By comparing the analytical predictions with the experimental results, it is demonstrated that adopting the fractional derivative method together with considering the effects of excitation frequencies, ambient temperatures, temperature rises, softening, and hardening, can reproduce the design performance of full-scale VE dampers very well.     

The Extraction of Urban Surface Water from Hyperspectral Data Based on Spectral Indices

To prevent confusion between water and buildings in the extraction of urban surface water from hyperspectral data, we analyzed the spectra of shadows and water in hyperspectral images, and proposed an anti-shadow water extraction method. This method first uses the normalized difference vegetation index (NDVI) for initial water extraction, then uses the height of the reflectance peak at 588 nm to eliminate the shadow of buildings. The method was validated by two hyperspectral datacubes, which were obtained for Jiaxing City and Zhoushan City in Zhejiang Province, China. Compared to the common spectral indices used to extract a water body, such as the NDVI, normalized difference water index, hyperspectral difference water index, and index of water index, the proposed method could effectively eliminate the shadow of buildings. The commission error reduced from more than 40% to about 15%, and the Kappa coefficient was increased from 60 and 70% to over 80% for the two datacubes. This indicated that the proposed method can inhibit the shadow of buildings and does not have a regional dependence.     

Botswana gravity reference net

Gravity reference stations for the National Gravity Survey of Botswana have been established at twenty-three sites throughout the country in a net linked to existing bases in South Africa, Kenya and Zambia with an internal accuracy of better than 0.5 gravity units (one gravity unit, gu, equals an acceleration of 10⁻⁶ m.s⁻²). The field procedure and reduction of data are explained and a list is given of the gravity values.