Copper-Polymetal Metallogenic Series and Prospecting Perspective of Eastern Section of Gangdise

Geological, geophysical, geochemical and remote sensing comprehensive studies show that big ore-prospecting potentiality is contained in the eastern section of the Gangdise Mountains, Tibet.There are various mineralization types with dominant types of porphyry and exhalation. According to their relations with tectonic evolution, they are divided into four kinds of metallogenic series as follows:magnmtic type (Cr, Pt, Cu, Ni) and exhalation type (Cu, Pb, Zn, Ag) ore deposit series related to Neo-Tethys oceanic crust subduction action (125-96 Ma); epithermai type (Au, Ag, Pb, Zn, Sb), altered fractured rock type (Cu, Mo) and skarn rock type (Cu) ore deposit series related to arc-continental collision; porphyry type (Cu, Mo), cryptoexplosion breccia type (Cu, Au, Pb, Zn), shear zone type (Au, Ag, Sb) and skarn rock type (Cu, Fe) ore deposit series with relation to post-orogenic extensional strike-slip. From subductive complex to the north, zoning appears to be crystallization differentiation type (segregation type)-shear zone type (altered rock type)-skarn rock type, epithermai type-porphyry type-porphyry type and exhalation type-exhalation type-hydrothermai filling-replacement type.The ore deposit is characterized by multi-places from the same source, parity and multi-stage, hypabyssal rock from the deep source and poly genetic compound as a whole.     

Isotopic effect of runoff in the Yarlung Zangbo River

This paper mainly analyzed the isotopic effect of precipitation in the Yarlung Zangbo River.On the whole,the isotopic compositions of most water samples fall on the upper right of the global meteoric water line.According to δD and δ18O data of the samples,the precipitation equation is figured out as δD=8 δ18O+10,showing that they are derived from precipitation but have experienced intensive evaporation.With obvious region-continental effect(a continuous depletion in heavy isotopes in water bodies occurs with increasing distance from the coast),the water presents a reducing trend of δD and δ18O westwards and southwards.Altitudinal effect is evident here,occur-ring in both trunk stream and main branches of the Yarlung Zangbo River.The distribution of water isotopic compo-sitions is concerned with the movement of precipitation clouds from the Bay of Bengal and the Nujiang River and is affected by the topographic and climatic conditions of the Tibetan Plateau.     

城市雨水地下回灌过程中悬浮物表面堵塞规律

雨洪资源地下回灌是缓解城市供水压力、解决地下水过量开采引起环境负效应的有效途径之一,但堵塞问题却是制约回灌技术推广的关键问题。基于前人理论,研究了入渗介质与悬浮物粒径中值之比(D₅₀/d₅₀)对堵塞层空间分布的影响。以建立表面堵塞预测模型为目的,利用城市雨水回灌细粒石英砂介质开展室内实验,观测雨水回灌的表面堵塞过程并获取渗透性变化的观测数据。根据物理、化学与生物堵塞的产生条件及堵塞特点,判断雨水回灌产生的堵塞性质为物理堵塞。引入过滤模型描述堵塞的发展过程,确定了模型用于模拟细砂表面堵塞的参数值：孔隙堵塞系数（α）为0.15 m²/kg,阻力增长系数（f′R′）为20 000 m/kg。在不改变以上2个参数值的条件下,用该模型模拟不同悬浮物粒径悬浊水回灌细粒石英砂的堵塞过程,取得了较好的拟合效果。此过滤模型可以用于模拟入渗介质与悬浮物粒径D₅₀/d₅₀值小于5的表面堵塞的发展过程,可定量预测堵塞对回灌速率的影响。     

西北地区煤炭、水资源、环境可持续发展研究

西北地区煤炭资源具有质量优良及资源相对集中的特点、研究西部煤炭资源的合理开发对建立我国合理的能源结构具有十分重要的意义，根据西北水资源和煤矿供水的一些特点，在分析了煤矿开发对水资源的需求与现状的基础上，提出了西北地区煤炭开发的水资源对策及建议。     

湘中锡矿山式锑矿成矿地质条件分析

湘中锡矿山式锑矿形成于晚白垩-古新世,空间上与岩脉关系密切,各锑矿床、矿化点都伴有或附近发育有煌斑岩及中-酸性岩脉群,在锑矿成矿同期地质事件中,还有周缘一些中-新生代红色盆地的形成及基性火山岩喷发,据之,提出湘中锡矿山式锑矿成矿与燕山晚期拉张构造-岩浆活化作用有关.锑矿床(点)基本上都产出于两组或两组以上断裂的交汇点附近,3组断裂的交汇部位对应于最主要的锑矿床(点).矿体具体受断裂交汇部位附近的次级短轴背斜轴部、倾伏背斜的倾伏端及其翼部被纵向陡倾角断裂构造所切穿的部位控制,是断裂导矿与背斜构造圈闭的体现.岩性组合控矿表现为易于硅化蚀变交代的砂质碳酸盐岩与隔挡层泥质岩所构成的岩性圈闭.根据包裹体均-温度和盐度测定成果,推算成矿压力为(200～300)×105Pa,成矿深度约为1 km.     

汶川地震地表破裂面形貌特征

准确描述破裂面形貌对于我们理解地震断层作用是非常重要的,破裂面的形貌特征包含许多关于地震和断层机制的有用信息。在Mw7.9 2008汶川地震中断层活动产生了两个新鲜的破裂面,八角庙破裂面和沙坝破裂面。我们使用3D便携式激光扫描仪(Tri mble GX)对两个破裂表面进行测量,在野外微观尺度上研究了破裂面形貌特征。通过能谱密度和均方值两个方法分析破裂面形貌,新鲜的破裂面表现为自相仿性,能谱密度和均方值均与剖面长度存在幂律关系。在能谱密度与空间频率的对数图中,能谱密度曲线存在明显的拐点,该拐点所对应的波长称为"特征波长",表明单一分形不能准确描述破裂面形貌。八角庙破裂面在平行滑动方向上的特征波长为7 mm,在垂直方向上特征波长略大一些(区域Ⅰ为10 mm,区域Ⅱ为9 mm);沙坝破裂面在平行滑动方向上的特征波长为8 mm,但垂直方向上特征波长略小(6 mm)。均方值曲线的最小二乘拟合直线的斜率为Hurst指数,该指数依赖于剖面线方向并描述破裂面形貌的各向异性,H指数的最小值和最大值分别与平行擦痕和垂直擦痕方向对应,这与野外断层面擦痕测量结果一致。沙坝破裂面的H指数极坐标图中存在次级H指数峰值(对应剖面线方向为85°和160°),这揭示破裂面上存在一组隐匿擦痕。该组隐匿擦痕为汶川地震之前断层活动中形成的,但这还不足以推测上一次断层活动的时间和规模。另外,通过比较新鲜节理面和破裂面表明H指数是否大于0.8反映了断层类型。在整个空间频率域上,能谱密度曲线斜率(-α)和均方值曲线斜率(H)的线性拟合关系为α=1.22+1.72H,并不严格满足两者之间理论关系式,α=1+2H。这个差异是由于测量信号噪音、破裂面的多分形性和分析方法的差异造成的。     

Cracking mechanisms during galena mineralization in a sandstone-hosted lead–zinc ore deposit: case study of the Jinding giant sulfide deposit, Yunnan, SW China

There are two types of lead–zinc ore bodies, i.e., sandstone-hosted ores (SHO) and limestone-hosted ores (LHO), in the Jinding giant sulfide deposit, Yunnan, SW China. Structural analysis suggests that thrust faults and dome structures are the major structural elements controlling lead–zinc mineralization. The two types of ore bodies are preserved in two thrust sheets in a three-layered structural profile in the framework of the Jinding dome structure. The SHO forms the cap of the dome and LHO bodies are concentrated beneath the SHO cap in the central part of the dome. Quartz, feldspar and calcite, and sphalerite, pyrite, and galena are the dominant mineral components in the sandstone-hosted lead–zinc ores. Quartz and feldspar occur as detrital clasts and are cemented by diagenetic calcite and epigenetic sulfides. The sulfide paragenetic sequence during SHO mineralization is from early pyrite to galena and late sphalerite. Galena occurs mostly in two types of cracks, i.e., crescent-style grain boundary cracks along quartz–pyrite, or rarely along pyrite–pyrite boundaries, and intragranular radial cracks in early pyrite grains surrounding quartz clasts. The radial cracks are more or less perpendicular to the quartz–pyrite grain boundaries and do not show any overall (whole rock) orientation pattern. Their distribution, morphological characteristics, and geometrical relationships with quartz and pyrite grains suggest the predominant role of grain-scale cracking. Thermal expansion cracking is one of the most important mechanisms for the generation of open spaces during galena mineralization. Cracking due to heating or cooling by infiltrating fluids resulted from upwelling fluid phases through fluid passes connecting the SHO and LHO bodies, provided significant spaces for crystallization of galena. The differences in coefficients of thermal expansion between pyrite and quartz led to a difference in volume changes between quartz grains and pyrite grains surrounding them and contributed to cracking of the pyrite grains when temperature changed. Combined thermal expansion and elastic mismatch due to heating and subsequent cooling resulted in the radial and crescent cracking in the pyrite grains and along the quartz–pyrite grain boundaries.