科尔沁湿草甸参考作物蒸散发模拟分析

为探明气候变化下干旱半干旱地区湿草甸参考作物蒸散发(ET₀)影响因子,使用FAO 56 P-M模型对科尔沁湿草甸ET₀进行模拟,利用涡度相关系统对模型的适用性进行评价,并通过通径分析及指标敏感性分析对ET₀的影响因子进行辨识。结果表明:(1)小时尺度模拟精度最高,日尺度次之,月尺度较差,小时尺度上晴、阴、雨3种天气条件下模拟效果不同,晴天最优,阴雨天较差。(2)ET₀年内变化呈单峰曲线状,生长季明显高于非生长季,集中在3—10月,占全年89.79%。生长季典型晴天ET₀逐小时分布特征遵循倒“U”单峰型变化规律。(3)通径分析结果显示,对ET₀的通径系数以及对回归方程估测可靠程度E的总贡献均表现为VPD(饱和水汽压差) > T_min(最低气温) > R_n(冠层表面净辐射)>u₂(2 m高度风速),即VPD为影响ET₀最重要的因子;指标敏感性分析中,在去除VPD后引起的E变化最大,说明ET₀对VPD的变化最为敏感,其次为u₂、T_min和R_n。     

Population,urbanization and economic scenarios over the Belt and Road region under the Shared Socioeconomic Pathways

The countries throughout the Belt and Road region account for more than 60% of the world's population and half of the global economy. Future changes in this area will have significant influences on the global economic growth, industrial structure and resource allocation. In this study, the proportion of the urban population to the total population and the gross domestic product were used to represent the levels of urbanization and economic development, respectively. The population, urbanization and economic levels of the Belt and Road countries for 2020–2050 were projected under the framework of the IPCC's shared socioeconomic pathways(SSPs), and the following conclusions are drawn.(1) The population, urbanization and economic levels in the Belt and Road region will likely increase under all five pathways. The population will increase by 2%–8%/10 a during 2020–2050 and reach 5.0–6.0 billion in 2050. Meanwhile, the urbanization rate will increase by 1.4%–7.5%/10 a and reach 49%–75%. The GDP will increase by 17%–34%/10 a and reach 134–243 trillion USD.(2) Large differences will appear under different scenarios. The SSP1 and SSP5 pathways demonstrate relatively high urbanization and economic levels, but the population size is comparatively smaller; SSP3 shows the opposite trend. Meanwhile, the economy develops slowly under SSP4, but it has a relatively high urbanization level, while SSP2 exhibits an intermediate trend.(3) In 2050, the population will increase relative to 2016 in most countries, and population size in the fastest growing country in Central Asia and the Middle East countries will be more than double. Urbanization will develop rapidly in South Asia, West Asia and Central Asia, and will increase by more than 150% in the fastest growing countries. The economy will grow fastest in South Asia, Southeast Asia and West Asia, and increase by more than 10 times in some counties with rapid economic development.     

基于倾斜摄影测量的大比例尺三维测图技术

目前,城市大比例尺地形图更新主要采用全野外的测量方法,不仅耗费大量的劳动力,并且效率低下。旋翼机和倾斜摄影测量技术的快速发展,为城市大比例尺地形图的测绘与更新提供了全新的技术手段。本文以滕州市城区约10 km2的1∶500地形图测绘项目为例,采用大疆精灵4 Pro旋翼机进行数据获取,Smart 3D软件进行空三加密及三维建模,最后在EPS软件中进行三维测图,并对地形图成果进行了精度检核,验证了技术方案的可行性,为同类项目提供了有益参考。     

京津冀夏季强降水下冰云宏微观特征

根据Aqua MODIS 2级云产品和Cloudsat的2级产品资料,结合降水数据和MODIS L1B级辐射率数据,对发生在京津冀地区夏季的三次强降水过程中冰云的宏微观物理量的特征进行分析,并探究这些物理量和降水强度的关系。结果表明：在水平分布中,强降水过程中降水强度高值区内云相为冰云,冰云云顶高度在8~17 km,冰云粒子有效半径、冰云光学厚度、冰水路径分别最高可达60 μm、 150、 5 000 g?m^-2;冰云光学厚度、冰水路径、冰云云顶高度随降水强度增大而增大。在垂直分布中,冰云主要分布在3.5 km以上,发生强降水站点的冰云为深对流云,冰云粒子有效半径、冰水含量、冰云粒子数浓度分别最高可达150 μm、 3 000 mg?m^-3 、 500 L^-1;冰云粒子有效半径高值区存在于云层中下部,且随高度上升而减小,冰云粒子数浓度高值区存在于云层中上部,且随高度上升而增加,冰水含量高值区则存在于云层中部;冰云粒子有效半径、冰水含量、冰云粒子数浓度在9 km以上随降水强度增大而增大。     

小叶锦鸡儿(Caragana microphylla)群落蒸散发模拟

基于2016、2017年生长季原位气象监测数据,利用Shuttleworth-Wallace(S-W)模型模拟了科尔沁沙地主要固沙植物小叶锦鸡儿(Caragana microphylla)群落的蒸散发,对蒸散组分进行了拆分,并利用涡度相关系统对模拟蒸散发值进行了验证。结果表明:2016、2017年生长季小叶锦鸡儿群落蒸散发量分别为345.4、325.2 mm,土壤蒸发量分别为93.8、83.8 mm,植被蒸腾量分别为251.6、241.4 mm,土壤蒸发占总蒸散发分别为27.2%、25.8%。30 min尺度上模拟值与实测值一致性较高,模拟精度大体表现为晴天>阴天>雨天。持续干旱和降水后,小叶锦鸡儿蒸腾耗水规律明显不同,持续干旱时期小叶锦鸡儿保持较低的蒸腾耗水,且具有明显的"午休"现象,连续降水后小叶锦鸡儿"午休"消失,蒸腾耗水增强。饱和水汽压差是影响小叶锦鸡儿蒸散发的主要因子。     

城镇增长下的收缩：以武汉为例

首先从人口、经济、用地3个维度综合考察武汉市增长与收缩的全貌,并采用县区及街道2个尺度的数据定量描述了武汉市增长与收缩的特征与空间格局,发现武汉市下辖青山区、硚口区、汉阳区和蔡甸区存在局部较严重的收缩现象,空间上形成集聚,形态上呈“穿孔式”。进一步以青山区为案例,着重从资本视角探讨发生局部收缩的内在机制,发现其存在老龄化、少子化趋势,但局部收缩的主因是资本从产业部门的“逃逸”。     

粒子加速器中高精度丝线绝对位置测量技术研究

粒子加速器中采用振动线技术进行共架单元上多块磁铁的高精度预准直,需要将振动线代表的磁中心引出进行共架单元之间的相对准直。为了获取以振动线为代表的丝线高精度空间绝对位置,本文对采用近景摄影测量技术进行点、线位置求解的方法进行了研究。利用单相机多站位的方法进行拍摄,通过标定板提供的高精度控制点坐标,采用自标定光束法平差对相机进行标定,并提出将空间直线离散成空间2点进行直线整体精确求解。对标定板上由2点组成的模拟直线进行测量验证,并与标定板提供的理论值进行对比,结果显示空间直线位置获取精度优于5 μm。这表明了本文理论和方法的正确性,为进一步研究丝线高精度空间绝对位置测量打下了基础。     

再探温跃层有孔虫B/Ca与温度和[CO32-]的依赖性及其在24 ka以来热带西太平洋次表层碳酸盐系统重建中的应用

The B/Ca ratio of planktonic foraminifer shells has been used as a proxy for reconstructing past ocean carbonate chemistry. However, recent studies have revealed significant uncertainties associated with this proxy, such as whether seawater temperature or [ CO_3~(2-)] is the dominant control on the partition coefficient(K_D) of planktonic foraminiferal B/Ca. To address these uncertainties and thus improve our understanding of the planktonic foraminiferal B/Ca proxy, we analysed B/Ca ratios in the tests of Neogloboquadrina dutertrei(300–355 μm) and Pulleniatina obliquiloculata(355–400 μm) in surface sediment samples from the tropical western Pacific and South China Sea. The relationship between these B/Ca ratios and bottom water calcite saturation states(Δ[ CO_3~(2-)]) is weak, thus suggesting only a small dissolution effect on the B/Ca of the two species. The correlation coefficients(R~2) between the B/Ca ratios of N. dutertrei and P. obliquiloculata and environmental parameters(e.g., temperature, salinity, phosphate, DIC and ALK) in the tropical western Pacific and South China Sea are not high enough to justify using B/Ca ratios as a palaeoenvironmental proxy in the study areas. The significant correlation between K_D values of N. dutertrei and P. obliquiloculata and carbonate system parameters(e.g.,[ CO_3~(2-)], DIC, ALK, pH and [ HCO_3~-]) in the study area reflect chemical links between the K_D denominator and these variables. Based on our surface sediment calibration, an empirical relationship between the K_D of N.dutertrei and temperature is proposed in the tropical western Pacific. We also generated a record of B/Ca ratios in N. dutertrei(300–355 μm) from Core MD06-3052 in the tropical western Pacific over the past 24 ka to evaluate the application of the revised B/Ca proxy method. Based on the reconstructed empirical relationship for B/Ca and subsurface seawater ALK, we estimated subsurface seawater carbonate system parameters in the tropical western Pacific since 24 ka. In general, the estimated subsurface seawater pH and [ CO_3~(2-)] show an increase with time, and the record of subsurface seawater pCO_2 shows a decrease with time, in the tropical western Pacific over the past 24 ka. The consistent trends in subsurface seawater pCO_2 and opal flux during deglaciation may imply that the reported increase in subsurface water pCO_2 in the study area was promoted by enhanced upwelling in the Southern Ocean.     

An appearance‐preserving simplification method for complex 3D building models

The simplification of 3D building models to effectively reduce model complexity and improve rendering efficiency is an important component of 3D GIS. To reduce the data volume while preserving the model appearance, this article proposes a novel simplification method for complex 3D building models. Texture discontinuities are addressed by developing a new data model that records the mapping relation between the texture coordinates of each vertex and its neighboring triangles. The surface mesh of the building model is then segmented into regions, guided by topology and appearance. Finally, the mesh segmentation information is used to derive an improved error metric that considers both geometric and texture errors, and the texture coordinates are adjusted after each simplification operation. A series of comparative experiments alongside traditional methods demonstrates that our approach achieves a good balance between geometric fidelity and texture preservation, and produces simplified 3D building models with better visual quality.     

Decomposition analysis on direct material input and dematerialization of mining cities in Northeast China

Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calculate the direct material input (DMI) of 14 typical mining cities in Northeast China in 1995-2004 and to analyze the demateri-alization and its driving factors in the different types of mining cities oriented by coal, petroleum, metallurgy and multi-resources. The results are as follows: 1) from 1995 to 2006, the increase rates of the DMI and the material input intensity of mining cities declined following the order of multi-resources, metallurgy, coal, and petroleum cities, and the material utilizing efficiency did following the order of petroleum, coal, metallurgy, and multi-resources cities; 2) during the research period, all the kinds of mining cities were in the situation of weak sustainable development in most years; 3) the pressure on resources and environment in the multi-resources cities was the most serious; 4) the petro-leum cities showed the strong trend of sustainable development; and 5) in recent years, the driving function of eco-nomic development for material consuming has continuously strengthened and the controlling function of material utilizing efficiency for it has weakened. The key approaches to promote the development of circular economy of min-ing cities in Northeast China are put forward in the following aspects: 1) to strengthen the research and development of the technique of resources' cycling utilization, 2) to improve the utilizing efficiency of resources, and 3) to carry out the auditing system of resources utilization.