The application of auto-temperature-controlled ventilation embankment in Qinghai-Tibet Railway

Auto-temperature-controlled ventilation embankment is an effective engineering measure for “cooling roadbed”. Practice proves that this new method can sufficiently make use of natural cold energy. It has the advantages of higher efficiency, better cooling effect and feasibility in engineering practice, and wider application in various environment, etc. And also, it is comparatively cheap in project cost. Through practice in the field for half a year, the testing results show that, with the application of auto-temperature-controlled system, the artificial permafrost table has been raised by 65 cm. The artificial permafrost table was basically at the embankment bottom, and the action of freeze-thaw circle on engineering stability was effectively avoided. In the month with highest ground temperature, in the scope with 1–4 m in depth, including the majority of the embankment and the upper part in the original seasonal layer, the ground temperature decreased by 0.7°C. Through thermal flux calculation in the original seasonal layer, in the month with the maximum thermal flux coming into permafrost, it is found that the thermal flux reduces nearly by half. Coming into the cooling period for nearly a month, the ground temperature in entire auto-temperature-controlled embankment is close to zero, and the foundation is at negative temperature. But in a large region in the embankment and foundation the ground temperature was over 0°C and varied from 0°C to0.39°C in ordinary ventilation embankment.     

The Frozen Soils and Devastating Characteristics of West Kunlun Mountains Pass Ms 8.1 Earthquake Area in 2001

The investigation on damages to frozen soil sites during the West Kunlun Mountains Pass earthquake with Ms 8.1 in 2001 shows that the frozen soil in the seismic area is composed mainly of moraine, alluvial deposit, diluvial deposit and lacustrine deposit with the depth varying greatly along the earthquake rupture zone. The deformation and rupture of frozen soil sites are mainly in the form of coseismic fracture zones caused by tectonic motion and fissures,liquefaction, seismic subsidence and collapse resulting from ground motion. The earthquake fracture zones on the surface are main brittle deformations, which, under the effect of sinlstral strike-slip movement, are represented by shear fissures, tensional cracks and compressive bulges. The distribution and configuration patterns of deformation and rupture such as fissures, liquefaction, seismic subsidence and landslides are all related to the ambient rock and soil conditions of the earthquake area. The distribution of earthquake damage is characterized by large-scale rupture zones, rapid intensity attenuation along the Qinghai-Xizang (Tibet) Highway, where buildings distribute and predominant effect of rock and soil conditions.     

一次强风暴的垂直环境特征数值模拟分析

应用MM 5模式对东北冷涡诱发的 2 0 0 2年 7月 1 2日强风暴进行了数值模拟 ,较成功地模拟出中尺度强对流风暴。发现冷涡后部中层干冷空气绝热下沉是东北冷涡 70 0hPa附近干暖盖形成和维持的重要机制 ,而低层暖湿气流爬升及干暖盖的抑制作用是东北冷涡强对流不稳定能量积累的重要机制。风暴发生前持续的低层西南风到中层西北风的风垂直切变产生的差动平流 ,加剧了层结不稳定 ,而风暴临近风垂直切变方向的快速逆转使热成风不平衡 ,必须通过激发垂直环流以适应其变化 ,对风暴发展有重要作用。     

兰州CAWS600-R自动站与人工观测资料对比分析

利用2002年11月到2003年2月兰州CAWS600-R型自动站与人工观测的温度、本站气压、水汽压、相对湿度、5～320cm地温等资料，分析了对比观测资料的差值。结果表明：对气温、本站气压、水汽压、相对湿度及320cm地温等要素观测误差较小，5～160cm地温的观测误差较大。自动观测仪器的系统性偏差、测量元件的精度及对气象要素变化响应的灵敏度、观测时间的差异和人为因素的影响是造成对比观测误差的原因。     

人工神经网络方法预报长江上游流域面雨量的探讨

利用1998～2000年3～11月长江上游六大流域逐日降水实况和MAPS、T106(T213)、欧洲中心等数值产品资料，采用人工神经网络方法，建立了六大流域强降水面雨量等级预报模型。并于2002年6～9月进行了业务试验。     

深圳湾公路大桥设计风速的推算

从资料的完整性和合理性、方法的规范性等几方面着手，对深圳湾公路大桥设计风速进行推算。利用深圳市气象站1954～2001年逐年年最大风速资料，通过时距、高度、地形等订正后得到相当于开阔平地上方10 m高度10 min年最大风速48年序列，使之符合建筑抗风指南或规范的要求。再利用极值Ⅰ型计算出不同重现期的基本风速，同时用耿贝尔的参数估算法和修正后的矩法参数估计法计算出不同重现期（200、120、100、60、50、30、10年）的基本风速。研究发现桥位区自动气象站与深圳市气象站最大风速正相关显著，前者是后者的1.1倍，从而可将基本风速外推到桥位区，进一步根据规范将该值放大1.11/2（1.049）倍至海面上，最终得到设计风速。还利用近地层风的指数和对数曲线推算出150 m内每10 m高度层的最大风速。     

Physicochemistry and Mineralogy of Storm Dust and Dust Sediment in Northern China

Dust sediments collected from 1995 to 1998 in Beijing, Dunhuang, Inner Mongolia, Kashi, the Kunlun Mountains, Lanzhou, Ningxia, the Taklimakan Desert, and Xi‘an, China, were characterized in terms of their physical, chemical, and mineralogical properties. Most aerosols and dust analysed ranged in texture from silty clay to clay loam. Their median particle diameters (Mds) generally ranged between 5 to 63μm,coinciding with those of loess from central China and the finest sand from northwestern China. The dust sediments were characterized by a predominance of SiO2 and Al2O3, followed by K2O. Their SiO2/Al2O3and K2O/SiO2 molar ratios ranged from 5.17 to 8.43 and from 0.009 to 0.0368, respectively. The mass concentration spectrum during a dust storm showed a single peak, rather than the triple peak generally observed under clear sky conditions. The dominant minerals were chlorite, illite, calcite, and dolomite.These physical, chemical, and mineralogical properties were consistent with those of aeolian soils and loess in western and central China. The results suggest that aerosols and fine-gained fractions of dust sediments collected in northern China are mainly composed of soil material transported from the arid and semiarid regions of China and Mongolia by prevailing winds. The rate of deposition and properties of dust falling on eastern China were strongly influenced by meteorological conditions, season, latitude, longitude, and altitude of the sampling sites.     

An update on the IEM surface backscattering model

The integral equation approach to modeling scattering from rough surfaces was introduced in 1992. At that time, it was noted that there was a need to find a transition reflection coefficient that could change its argument from the incident angle to the specular angle as frequency or roughness scale got large. One such reflection coefficient was published in 2001. In this letter, we would like to include this reflection coefficient in the integral equation model to interpret several multifrequency backscattering measurements from surfaces with surface parameters defined by the investigators who acquired the data.     

Land cover dynamics in Garhwal Himalayas — a case study of balkhila sub-watershed

The present paper focuses on land cover dynamics pattern in Balkhila sub-watershed situated in Garhwal Himalayas. This study contributes example from human shaped ecosystem in mountainous regions where fragmentation of natural resources is active. The remote sensing and GIS has been used to understand the land cover dynamics along the topography. The results report that the land cover dynamics is dependent on the aspect due to sun illumination. The altitude and slope are no more a barrier for resource extraction and the human activity zone is shifting towards higher altitudes and slopes. The changes are also defined along the road and settlements.