An approach to determination of phenolic compounds in seawater using SPME-GC-MS based on SWCNTs coating

Phenolic compounds have become one kind of the important pollutants of the marine environment. Single-walled Carbon nanotubes, as one-dimensional nano materials, have light weight and perfect hexagonal structure of connections, with many unusual mechanical, chemical and electrical properties. In recent years, with the research of carbon nanotubes and other nano materials, the application prospect is also constantly discussed. In this paper, homemade single-walled carbon nanotubes(SWCNTs) coating was used for establishing an analytical approach to the determination of five kinds of phenolic compounds in seawater using SPME-GC-MS. Optimal conditions: After saturation was conducted with Na Cl, and p H was adjusted to 2.0 with H_2SO_4, the extract was immersed in a water bath at 40 for GC℃-MS determination through 40-min agitating extraction at 500 rmin~(-1) and 3-min desorption at 280℃. The liniearities ranged between 0.01-100 μg L~(-1), and the determination limits ranged between 1.5-10 ngL~(-1). The relative standard deviation(RSD, n = 5) was less than 6.5%. For the phenolic compounds obtained from the spiked recovery test for actual seawater samples, the rates of recovery were 87.5%-101.7%, and the RSDs were less than 8.8%, which met the requirements of determination. Due to its simplicity, high efficiency and low consumption, this approach is suitable for the analysis of trace amounts of phenolic compounds in marine waters.     

Development and Extension of An Aggregated Scale Model: Part 1 – Background to ASMITA

Whilst much attention has been given to models that describe wave, tide and sediment transport processes in sufficient detail to determine the local changes in bed level over a relatively detailed representation of the bathymetry, far less attention has been given to models that consider the problem at a much larger scale (e.g. that of geomorphological elements such as a tidal flat and tidal channel). Such aggregated or lumped models tend not to represent the processes in detail but rather capture the behaviour at the scale of interest. One such model developed using the concept of an equilibrium concentration is the Aggregated Scale Morphological Interaction between Tidal basin and Adjacent coast (ASMITA). In this paper we provide some new insights into the concepts of equilibrium, and horizontal and vertical exchange that are key components of this modelling approach. In a companion paper, we summarise a range of developments that have been undertaken to extend the original model concept, to illustrate the flexibility and power of the conceptual framework. However, adding detail progressively moves the model in the direction of the more detailed process-based models and we give some consideration to the boundary between the two.     

Water system characteristics of Karst river basins in South China and their driving mechanisms of hydrological drought

Natural Hazards - It is common knowledge that drought is considered one of the most damaging natural disasters in terms of economic costs, societal problems, and ecological impacts. In this study,...     

Zircon U-Pb Geochronology,Geochemistry and Petrogenesis of Early Cretaceous A-type Granites in the Mikengshan Area,Southern Jiangxi ProvinceEI北大核心CSCD

In the Mikengshan-Yanbei area, a special region for the tin mineralization in South China, there are some Yanshanian granites and porphyries and associated porphyry tin deposits (e.g., Yanbei). Although the tin mineralization is closely associated with the granitoids magmatism, the age and petrogenesis of the granites remain controversial. The Mikengshan pluton, which intrudes into the rhyolitic tuff and pyroclastic rocks of the Upper Jurassic Jilongzhang Formation, is the largest one in Mikengshan-Yanbei area and mainly consists of K-feldspar bearing granites. In this study, we report new age and geochemical data for the Mikengshan K-feldspar bearing granites. LA-ICP-MS zircon U-Pb age dating shows that they were generated in the Early Cretaceous (~138 Ma). They have high SiO2 (74.42% to 76.69%), low Al2O3 (12.39% to 13.49%) and Mg# (11 to 19), and negative Eu, Sr and Ba anomalies, and are rich in potassium (most K2O/Na2O=1.37 to 1.94) and high field strength elements (HFSEs), and are weakly peraluminous (A/CNK=1.03 to 1.1) with high 10000×Ga/Al ratios (3.46 to 4.96) and slightly high zircon saturation temperatures (807 ℃ to 817 ℃), showing the characteristics of the typical A-type granites. Moreover, they have high Rb contents 842×10-6 to 1295×10-6, Rb/Sr (90 to 255) ratios and show rare earth elements (REE) tetrad effect, which are similar to those of high fractionated granites. Thus, we suggested that the Mikengshan K-feldspar bearing granites are high fractionated and aluminous A-type granite. Their slightly high εNd(t) values (-3.4 to -4.6) indicate that the mantle components should have played a role during their formation. Taking into account regional igneous rocks and tectonic setting data, we suggest that the Mikengshan K-bearing granites were formed in an extensional setting, which was probably related to the roll-back of the subducted Paleo-Pacific plate. © 2018, Science Press. All right reserved.     

Research on Creep Deformation and Control Mechanism of Weak Surrounding Rock in Super Large Section Tunnel

Geotechnical and Geological Engineering - In order to solve the difficulties of creep deformation of surrounding rock in super large section tunnel, taking Letuan tunnel of Binlai expressway, a...     

Predicting the entire soil-water characteristic curve using measurements within low suction range

The soil-water characteristic curve(SWCC) is widely used in the design and evaluation in the practice of geotechnical and geoenvironmental engineering such as the slope stability under the influence of environmental factors. The SWCC has distinct features in the capillary and adsorption zones due to different physical mechanisms. Measurements of the SWCC are typically limited within the capillary zone(i.e., low suction range). It is cumbersome and time-consuming to measure the SWCC in the adsorption zone(i.e., high suction range). This study presents a simple method to predict the entire SWCC within both the capillary and adsorption zones, using measured data only from low suction range(e.g., from 0 to 500 kPa). Experimental studies were performed on a completely weathered granite residual soil to determine its entire SWCC from saturated to dry conditions. The resultant SWCC, along with the SWCC measurements of 14 soils reported in the literature, were used to validate the proposed method. The results indicate that the proposed method has good consistency with a wide array of measured data used in this study. The proposed method is easy to use as it only requires a simple parameter calibration for a commonly used SWCC model. It can be used to improve the reliability in the prediction of the SWCC over the entire suction range when measurements are limited within the low suction range.     

Dynamic metabolite alterations of Portunus trituberculatus during larval development

Journal of Oceanology and Limnology - A mass mortality often occurs from molting to the megalopa stage during the larval development of the swimming crab Portunus trituberculatus. Larvae with...     

Analysis of city centrality based on entropy weight TOPSIS and population mobility: A case study of cities in the Yangtze River Economic Belt

Based on statistical data and population flow data for 2016,and using entropy weight TOPSIS and the obstacle degree model,the centrality of cities in the Yangtze River Economic Belt(YREB)together with the factors influencing centrality were measured.In addition,data for the population flow were used to analyze the relationships between cities and to verify centrality.The results showed that:(1)The pattern of centrality conforms closely to the pole-axis theory and the central geography theory.Two axes,corresponding to the Yangtze River and the Shanghai-Kunming railway line,interconnect cities of different classes.On the whole,the downstream cities have higher centrality,well-defined gradients and better development of city infrastructure compared with cities in the middle and upper reaches.(2)The economic scale and size of the population play a fundamental role in the centrality of cities,and other factors reflect differences due to different city classes.For most of the coastal cities or the capital cities in the central and western regions,factors that require long-term development such as industrial facilities,consumption,research and education provide the main competitive advantages.For cities that are lagging behind in development,transportation facilities,construction of infrastructure and fixed asset investment have become the main methods to achieve development and enhance competitiveness.(3)The mobility of city populations has a significant correlation with the centrality score,the correlation coefficients for the relationships between population mobility and centrality are all greater than 0.86(P<0.01).The population flow is mainly between high-class cities,or high-class and low-class cities,reflecting the high centrality and huge radiating effects of high-class cities.Furthermore,the cities in the YREB are closely linked to Guangdong and Beijing,reflecting the dominant economic status of Guangdong with its geographical proximity to the YREB and Beijing's enormous influence as the national political and cultural center,respectively.     

一种污水排海的近远区计算与控制方法──以大亚湾水容量计算及污水排海为例

针对点容量计算中混合区限制的要求，采用了动量积分法、经验公式法和有限差分法，分别对污水排放后可能引起的近区、过渡区和远区的污水浓度变化进行了模拟预测，并就一定的限制性条件对容量点近区、高浓度混合区及容量点远区影响范围进行了分析。在大亚湾水容量计算及污水排海规划中的应用表明，该法具有计算机时较省、精度相对较高等优点。