节水稻基农田作物轮作与灌溉模式需水规律研究

采取田间试验方法,研究了南方丘陵典型季节性干旱区节水稻基农田作物轮作与灌溉模式的需水规律和稻田水分利用率.结果表明,节水稻基农田作物轮茬与灌溉模式通过对水稻和油菜等作物产生的生长调控作用和补偿生效应,使植株蒸腾量、棵间蒸发量及稻田渗漏量大幅降低,各阶段的腾发量、需水强度和需水模系均发生显著变化,形成了稻基农田作物轮茬与灌溉模式新的需水规律.与常规双季模式相比,节水灌溉双季稻模式、水旱轮作双季稻模式、稻油轮作模式的需水强度分别减少了0.76、1.15、0.71 mm/d,渗漏强度分别减少了0.12、0.16、0.19mm/d,水分利用率提高了30.14%、47.95%、17.81%.     

频谱分析在虎门大桥动态监测中的应用研究

采用了频谱分析法对虎门跨海悬索大桥进行安全监测,通过利用GPS RTK技术方法获取虎门大桥在台风激励下的动态监测数据,对动态监测数据进行时程分析和频谱分析,获取虎门悬索大桥的振动特性,得到了大桥的运营特征和实时位移特征.     

基于动态检测平台的GPS接收机动态性能检测研究

介绍了一种新型动态检测平台,设计了GPS动态差分试验和双动态差分试验,分析了GPS动态单点定位、动态差分测量、双动态差分测量在两种不同速度条件下进行了的试验数据.     

机载激光雷达平均树高提取研究

为了研究机载激光雷达(LiDAR)树高提取技术,以山东省泰安市徂徕山林场为实验区,于2005年5月进行了机载LiDAR数据获取和外业测量.通过对LiDAR点云数据的分类处理,分别得到了试验区的地面点云子集、植被点云子集和高程归一化的植被点云子集.基于高程归一化的植被点云子集计算了上四分位数处的高度,与实地测量的数据进行了比较,并结合中国森林调查规程进行了实用性分析.结果表明:对于较低密度的点云数据,使用分位数法可以较好地进行林分平均高的估计;机载激光雷达技术对树高估计是可行的,精度都高于87%,总体平均精度为90.59%,其中阔叶树的精度高于针叶树.该试验精度可以满足中国二类森林调查规程中平均树高因子的一般商品林和生态公益林的精度要求,对国有商品林小班的调查精度要求(5%)存在一点差距,需要在国有商品林区进一步开展验证工作.对本试验区而言,已经可以满足其作为森林公园生态公益林的调查要求.     

重金属污染胁迫下盐肤木的生化效应及波谱特征

利用遥感生物地球化学的原理和方法,分析了德兴铜矿的重金属污染状况和植物盐肤木的生物地球化学效应,对盐肤木生物地球化学效应的波谱特征进行了系统的提取和分析.研究发现酸、铜、镉等是德兴铜矿地区主要的环境污染因子,野外调查及样品的化验分析表明盐肤木对铜元素呈现一定的富集作用和很强的位移效应,是适合铜矿复垦的植被.利用导数光谱、包络线去除、红边效应、植被指数等光谱信息处理方法对盐肤木的野外波谱分析表明,随着叶片中Cu等金属元素含量的增大,其产生的毒化效应的波谱特征越明显,盐肤木叶片光谱反射率明显升高,波形蓝移,红边陡坡斜率增大,叶绿素吸收深度变浅,吸收中心稍有蓝移,水的吸收深度变浅,吸收中心位置红移,绿度指数变化明显.对波谱特征及其与重金属含量的相关关系综合分析后认为,红边特征、植被指数NDVI、叶绿素吸收深度与叶片铜含量关系显著,可以作为植被铜污染遥感图像特征提取的参考.     

井中激电地-井方式井旁球体正反演

以激发极化法中的地-井方式中的体极化球形体作为研究对象,采用解析法对地下半空间的电位场进行求解,利用提取出的井中二次场异常电位差进行反演,得出极化球体的球心离井的距离和球心的埋深。通过计算机进行正反演模拟,验证了进行正反演计算的解析式的正确性,并从物理意义上对正反演过程中出现的现象进行分析。最后给出该方法的适用条件以及注意事项。研究对激发极化法地下勘探目标的定量分析具有明确意义。     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.     

GNSS three carrier ambiguity resolution using ionosphere-reduced virtual signals

This paper presents a general modeling strategy for ambiguity resolution (AR) and position estimation (PE) using three or more phase-based ranging signals from a global navigation satellite system (GNSS). The proposed strategy will identify three best “virtual” signals to allow for more reliable AR under certain observational conditions characterized by ionospheric and tropospheric delay variability, level of phase noise and orbit accuracy. The selected virtual signals suffer from minimal or relatively low ionospheric effects, and thus are known as ionosphere-reduced virtual signals. As a result, the ionospheric parameters in the geometry-based observational models can be eliminated for long baselines, typically those of length tens to hundreds of kilometres. The proposed modeling comprises three major steps. Step 1 is the geometry-free determination of the extra-widelane (EWL) formed between the two closest L-band carrier measurements, directly from the two corresponding code measurements. Step 2 forms the second EWL signal and resolves the integer ambiguity with a geometry-based estimator alone or together with the first EWL. This is followed by a procedure to correct for the first-order ionospheric delay using the two ambiguity-fixed widelane (WL) signals derived from the integer-fixed EWL signals. Step 3 finds an independent narrow-lane (NL) signal, which is used together with a refined WL to resolve NL ambiguity with geometry-based integer estimation and search algorithms. As a result, the above two AR processes performed with WL/NL and EWL/WL signals respectively, either in sequence or in parallel, can support real time kinematic (RTK) positioning over baselines of tens to hundreds of kilometres, thus enabling centimetre-to-decimentre positioning at the local, regional and even global scales in the future.     

基于SVM的多源遥感影像面向对象建筑物提取方法

在分析支持向量机(Support Vector Machine,SVM)分类技术和机载激光雷达(LIDAR)数据、航空影像特征的基础上,提出了基于SVM的LIDAR数据和航空影像的面向对象建筑物提取方法。结果表明,该方法充分利用了多源影像的互补信息,能够得到更高的信息提取精度,准确而快速地更新地理空间数据库,是一种有效的面向对象建筑物提取方法。     

GIS软件符号功能特点

讨论当前国内外GIS软件的符号功能及花纹图案填充功能的特点,指出实际应用中不足,为现有软件平台进行符号设计、编辑以及制图等提供参考。