Ammonium,nitrate and phytoplankton interactions in a freshwater tidal estuarine zone: potential effects of cultural eutrophication

Nitrate and ammonium are the most important nitrogen sources for phytoplankton growth. Differential utilization of inorganic nitrogenous compounds by phytoplankton has been observed and may have significant impacts on primary productivity at local scales. We used enrichment experiments with natural phytoplankton populations from the freshwater tidal zone of the Guadiana estuary, a coastal ecosystem increasingly subjected to anthropogenic influences, to study the effects of nitrate and ammonium on N-consumption and phytoplankton growth. In addition, we used combined additions of nitrate and ammonium to understand the inhibitory effect of ammonium over nitrate uptake. Ammonium concentrations in the freshwater tidal reaches of the Guadiana estuary throughout the sampling period were too low to exert an inhibitory effect on nitrate uptake or a toxic effect on phytoplankton growth. Nitrate was clearly the main nitrogen source for phytoplankton at the study site. Overall, nitrate seemed to become limiting at concentrations lower than 20 μM and N-limitation was particularly significant during summer. A trend of decreasing nitrate uptake with increasing ammonium concentrations and uptake suggested an overall preference for ammonium. However, preference for ammonium was group-specific, and it was observed mainly in green algae and cyanobacteria. In fact, cyanobacteria relied only on ammonium as their N-source. On the contrary, diatoms preferred nitrate, and did not respond to ammonium additions. The increasing eutrophication in the Guadiana estuary and particularly increased inputs of nitrogen as ammonium due to urban waste effluents may result in a shift in phytoplankton community composition, towards a dominance of cyanobacteria and green algae.     

Evolution of erythemal and total shortwave solar radiation in Valladolid,Spain: Effects of atmospheric factors

Erythemal ultraviolet (UVER; 280–400 nm) and total shortwave (SW; 305–2800 nm) solar irradiances were recorded from 2000 to 2009 in Valladolid, Spain. UVER and SW values under cloudless conditions are simulated by radiative transfer (TUV 4.6) and empirical models. These model estimations are tested with experimental measurements showing a great agreement (root mean square error around 7%). The aerosol effect on UVER irradiance is determined through a model study. UVER radiation and total ozone column (TOC) temporal evolutions show a negative relationship. TOC accounts for 80% of UVER variance and its radiation amplification factor is 1.1 at zenith of 65°. Cloud effects on solar radiation are shown and quantified by the cloud modification factor. Moreover the enhancement effect cases are analysed. SW radiation proves more sensitive to clouds than UVER. Clouds are seen to attenuate and enhance solar radiation by up to 93% and 22% in the UVER range, respectively.     

Active surface faulting or landsliding in the Lower Tagus Valley (Portugal)? A solved controversy concerning the Vila Chã de Ourique site

The Lower Tagus Valley has experienced significant (M 6–7) historical seismicity, evidencing the presence of seismogenic faults. These are still deficiently known due to the low strain rates and the recent alluvial sedimentation of the Tagus River that buries most of the structures, though Paleoseismic evidence was allegedly found by a research team in the Tagus valley, at a site 60 km N of Lisbon, near Vila Chã de Ourique (VCO). According to this team, trenching at the VCO site exposed an active thrust fault, evidencing the surface rupture of a large earthquake that occurred in 1531. Our studies performed at this site, comprising field observations with a reappraisal of the trench outcrops previously excavated, borehole drilling, soil mechanics laboratory testing, and seismic reflection acquisition, pointed to the alternative interpretation that the outcropping structures are gravitational and not of tectonic origin. The interpretation of new outcrops crosscutting the structures exposed at the trenches, as well as newly acquired high-resolution seismic reflection data, definitely exclude the active thrust fault explanation and support a gravitational slip model for all the observed structures. Gravitational slip in the river bank slope was promoted by low shear strength clays and high pore water pressure coupled with slope toe river erosion. Gravitational slides must have occurred prior to development of the present sedimentation level of the Tagus alluvial plain, which was attained in the last few thousand years as indicated by borehole data and estimations of sedimentation rates.     

On‐line Solid Phase Extraction of Copper in Water Samples with Flow Injection Flame Atomic Absorption Spectrometry

An on‐line solid phase extraction method for the preconcentration and determination of Cu(II) by flame atomic absorption spectrometry has been described. The procedure is based on the retention of Cu(II) ions at pH 6.0 on a minicolumn packed with Amberlite XAD‐1180 resin impregnated with chrome azurol S. After preconcentration, Cu(II) ions adsorbed on the impregnated resin were eluted by 1 mol L^?1 HNO₃ solution. Several parameters, such as pH, type of eluent, flow rates of sample and eluent solutions, amount of resin were evaluated. At optimized conditions, for 3.5 min of preconcentration time, the system achieved a detection limit of 1.0 µg L^?1, and a relative standard deviation of 1.2% at 0.2 µg mL^?1 copper. An enrichment factor of 56‐fold was obtained with respect to the copper determination. The proposed method was successfully validated by the analysis of standard reference material (TMDA 54.4 lake water) and recovery studies. The method was applied to the preconcentration of Cu(II) in natural water samples.     

The K–Ar Cassignol–Gillot technique applied to western Martinique lavas: A record of Lesser Antilles arc activity from 2 Ma to Mount Pelée volcanism

We present 23 new ages from three volcanic complexes of the Lesser Antilles arc in Martinique Island (French West Indies). These ages obtained with the K–Ar Cassignol–Gillot technique are distributed within the whole Quaternary. They allowed us to reconstruct a detailed history of successive volcanic growth and flank collapse stages. Trois Ilets Volcanism has been active during at least 2 Ma, between 2.35 ± 0.03 Ma and 346 ± 27 ka, with monogenetic volcanoes of basaltic-andesite to andesitic compositions. We here propose that magma mixing, which characterizes this volcanism, could have been initiated between 617 and 346 ka by the activation of arc-parallel and arc-transverse fault systems. Meanwhile, the Carbet complex was active 25 km to the north from 998 ± 14 to 322 ± 6 ka, and was partially destroyed by a flank collapse after 602 ± 10 ka. Together with geochemical data, our ages show that Mount Conil and Mount Pelée volcanoes are parts of the same edifice sharing a single magmatic reservoir. Mount Conil started to emerge before 543 ± 8 ka, and andesites erupted until 127 ± 2 ka, when a flank collapse destroyed the western flank of the edifice, probably triggering the emplacement of Piton Marcel, the last eruption of this first stage. We note that this collapse occurred during the transition from oxygen stages 6 to 5, i.e. during glacial to interglacial change, when eustatic level rapidly increased. After that, and until present, Mount Pelée volcano was built with periods of cone growth intercalated by flank collapse events. We here show that a peak of activity occurred between 550 and 330 ka in western Martinique within the three complexes, which are spaced of 15–25 km. Since 330 ka volcanic activity is limited to the northernmost Mount Conil–Mount Pelée complex. Our data are in agreement with the regional scale observations that the whole recent Lesser Antilles arc was subject to a high volcanic activity since 600 ka, probably linked to an increase in magma production. This permanent establishment of rising magma in regularly spaced batches and tectonically controlled, could explain the individual chemical evolution of each edifice and the different eruptive dynamisms occurring at the same time along the recent arc.     

Regional gravimetric quasi-geoid model and transformation surface to national height system for Turkey (THG-09)

Turkish regional geoid models have been developed by employing a reference earth gravitational model, surface gravity observations and digital terrain models. The gravimetric geoid models provide a ready transformation from ellipsoidal heights to the orthometric heights through the use of GPS/leveling geoid heights determined through the national geodetic networks. The recent gravimetric models for Turkish territory were computed depending on OSU91 (TG-91) and EGM96 (TG-03) earth gravitational models. The release of the Earth Gravitational Model 2008 (EGM08), the collection of new surface gravity observations, the advanced satellite altimetry-derived gravity over the sea, and the availability of the high resolution digital terrain model have encouraged us to compute a new geoid model for Turkey. We used the Remove-Restore procedure based on EGM08 and applied Residual Terrain Model (RTM) reduction of the surface gravity data. Fast Fourier Transformation (FFT) was then used to obtain the residual quasigeoid from the reduced gravity. We restored the individual contributions of EGM08 and RTM to the whole quasi-geoid height (TQG-09). Since the Helmert orthometric height system is adopted in Turkey, the quasi-geoid model (TQG-09) was then converted to the geoid model (TG-09) by making use of Bouguer gravity anomalies and digital terrain model. After all we combined a gravimetric geoid model with GPS/leveling geoid heights in order to obtain a hybrid geoid model (THG-09) (or a transformation surface) to be used in GPS applications. The RMS of the post-fit residuals after the combination was found to be ± 0.95 cm, which represents the internal precision of the final combination. And finally, we tested the hybrid geoid model with GPS/leveling data, which were not used in the combination, to assess the external accuracy. Results show that the external accuracy of the THG-09 model is ± 8.4 cm, a precision previously not achieved in Turkey until this study.     

Transgressive dunefield landforms and vegetation associations,Doña Juana,Veracruz, Mexico

Transgressive dune fields often comprise a multiplicity of landforms where vegetation processes largely affect landform dynamics, which in turn, also affect vegetation processes. These associations have seldom been studied in detail. This paper examines four separate landform types in a complex coastal transgressive dunefield located in the central Gulf of Mexico, in order to assess the relationships between dunefield habitat, local environmental factors, vegetation associations and landform evolution. Topographic surveys using tape and clinometer were conducted in conjunction with vegetation survey transects at four locations across the Doña Juana dunefield. Vegetation surveys allowed the estimation of relative plant cover of each plant species found along the transects. A large variety of landforms were found at the Doña Juana Dunefield: deflation plains, gegenwalle (counter) ridges, transverse dune trailing ridges, blowouts and parabolic dunes, aklé (fish‐scale shaped) dunefields and precipitation ridges, with plant species associations developing on these different landforms equally variable. Flood tolerant species were located in the lower parts (deflation plain and gegenwalle ridges) whereas the older and dryer parts were covered by coastal matorral shrubs. Burial‐tolerant species were dominant in the most mobile areas (blowouts and aklé dunefield and margin). The dune trailing ridge, with relatively milder conditions, showed the highest richness, with no dominant species. A dual interaction was found such that colonizing species both create and affect topography, and in turn, topography determines vegetation association and succession patterns. In coastal dunes, the vegetation and abiotic environment (namely the different landforms and the inherent micronevironmental variability) interact tightly and generate a complex and highly dynamic biogeomorphic system where substrate mobility and colonization processes reinforce one another in positive feedback. Copyright © 2010 John Wiley & Sons, Ltd.     

Distribution of n-alkanes in lacustrine sediments from subtropical lake in Brazil

The geochemical composition of lake bed sediments of a tropical reservoir in Brazil have been investigated. The C, N, P composition showed almost no variation between the different sampling points. All samples contained inorganic phosphorus (IP) ranging from 52 to 70%. The Redfield ratios show that the lake is without significant anthropogenic inputs. Most of the organic matter is composed by higher plants decomposition revealed in the total organic carbon (TOC):nitrogen (N) ratio ranging from 15.4 to 57.2. Also, TOC:organic phosphorus (OP) ranged from 265.3 to 933.6, suggesting that most of the organic matter has terrestrial origin from wood plants. The ratios suggest that most organic matter is influenced by the terrestrial characteristics of the watershed. Furthermore, the relative abundance of n-alkane homologues in the sediments was investigated. All samples have been analyzed for the n-alkanes C₈ to C₄₀. The sediments were dominated by n-alkanes C₂₅–C₃₈. It is concluded that n-alkane in sediments mainly come from terrestrial plants, however there is a contribution of submerged aquatic plants, especially in those sites in deeper areas of the lake. On the basis of P_aq index the n-alkanes in sediments comes from terrestrial plants, however there is a contribution from emerged/floating plants.The investigated lake seems to be considered as meso to eutrophic. Because of the relatively high primary productivity in the lakes, there is a substantial organic-matter flux to the sediments, which rapidly becomes anoxic. According to the pristine/phytane ratio the sediments represent an anoxic environment with values found between 0.38 and 1.72.     

Assessing the performance of a foraminifera-based transfer function to estimate sea-level changes in northern Portugal

We assessed the performance of a transfer function model for sea-level studies using salt-marsh foraminifera from two estuaries of northern Portugal. An independent data set of 12 samples and 13 sub-fossil samples from a core were used to evaluate if reconstructions and errors derived from current models are adequate. Initial transfer function models provided very strong results as indicated by cross-validation (component 2; r² = 0.80-0.82; RMSEP ranged from 10.7 to 12.3 cm) and improved its performance by ca. 10% when sample size reached ca. 50. Results derived using an independent test data set indicate that cross-validation is a very effective approach and produces conservative errors when compared to observed errors. We additionally explored the possible effect of transforming the concentration data into percent in the error estimations by comparing the results obtained based on the use of both concentration and compositional data. Results indicate that this type of transformation does not affect the performance of the transfer function. Results derived from a reconstruction of sub-fossil samples from a core indicate that high-resolution sea-level reconstructions are possible, but show that depositional environments have to be selected carefully in order to minimize the impact of possible taphonomical loss.