Nankai Trough and Zenisu Ridge: a deep-sea submersible survey

Eight submersible dives between 3000 and 4200 m water depth were made off southern Japan in the eastern Nankai subduction zone. Benthic communities associated with chemosynthetic processes were discovered along the 800 m wide active tectonic zone, at the toe of the accretionary prism. A benthic community was also discovered along a zone of active compression, at the foot of Zenisu Ridge, 30 km south of Nankai Trough. Temperature measurements within the sediments below the benthic communities confirm that upward motion of interstitial water occurs there. Studies of water samples indicate advection of methane and light hydrocarbons. Specimens of the benthic community have been shown to have included in their shells carbonate resulting from methane consumption. Thus the benthic communities are related to overpressure-driven fluid advection along tectonic zones with active surface deformation. A 300 m high active scarp at the toe of the accretionary prism is related to relative motion in a 280° direction which is close to the 305° average direction of subduction in this area. The dives establish further that compressive deformation is presently occurring at the foot of Zenisu Ridge. The previous interpretation of the Zenisu Ridge as a zone of recent north-south intraplate shortening, 40 km south of the Nankai Trench, is confirmed. We conclude that tectonic evolution might well lead to future detachment of the Zenisu Ridge and overthrusting of this large piece of oceanic crust over the continental margin. Such a process might be an efficient one to emplace ophiolites over continents.     

Fluid absent melting of a layered crustal protolith: implications for the generation of anatectic granites

We report the result of H₂O-undersaturated melting experiments on charges consisting of a layer of powdered sillimanite-bearing metapelite (HQ36) and a layer of powdered tonalitic gneiss (AGC150). Experiments were conducted at 10 kbar at 900°, 925° and 950°C. When run alone, the pelite yielded 40 vol% strongly peraluminous granitic melt at 900°C while the tonalite produced only 5 vol% weakly peraluminous granitic melt. At 950°C, the pelite and the tonalite yielded 50 vol% and 7 vol% granitic melt, respectively. When run side by side, the abundance of melt in the tonalite was 10 times higher at all temperatures than when it was run alone. In the pelite, the melt abundance increased by 25 vol%. When run alone, biotite dehydration-melting in the tonalite yielded orthopyroxene and garnet in addition to granitic melt. When run side by side only garnet was produced in addition to granitic melt. Experiments of relatively short duration, however, also contained Al-rich orthopyroxene. We suggest that the large increase in melt fraction in the tonalite is mainly a result of increased activity of Al₂O₃ in the melt, which lowers the temperature of the biotite dehydration-melting reaction. In the pelite, the increase in the abundance of melt is caused by transport of plagioclase component in the melt from the tonalite-layer to the pelite-layer. This has the effect of changing the bulk composition of this layer in the direction of minimum-temperature granitic liquids. Our results show that rocks which are poor melt-producers on their own can become very fertile if they occur in contact with rocks that contain components that destabilize the hydrous phase(s) and facilitate dehydration-melting. Because of this effect, the continental crust may have an even greater potential for granitoid melt production than previously thought. Our results also suggest that many anatectic granites most likely contain contributions from two or more different source rocks, which will be reflected in their isotopic and geochemical compositions.     

Derivation of potassic (shoshonitic) magmas by decompression melting of phlogopite+pargasite lherzolite

A model metasomatized lherzolite composition contains phlogopite and pargasite, together with olivine, orthopyroxene, clinopyroxene and spinel or garnet as subsolidus phases to 3 GPa. Previous works established that at ≥1.5 GPa, phlogopite is stable above the dehydration solidus, determined by the melting behaviour of pargasite and coexisting phases. At 2.8 GPa, melts with residual phlogopite+garnet lherzolite mineralogy at 1195 °C and with garnet lherzolite mineralogy at 1250 °C are both olivine nephelinite with K/Na (atomic)=0.51 and K/Na=0.65, respectively. Recent work shows that melting along the dehydration (fluid-absent) solidus of the phlogopite+pargasite lherzolite at pressures <1.5 GPa is very different with the presence of phlogopite, decreasing the solidus below that of pargasite lherzolite. At 1.0 GPa, both phlogopite and pargasite disappear at temperatures at or slightly above the solidus. The compositions of two melts at 1.0 GPa, 1075 °C (with different water contents), in equilibrium with residual spinel lherzolite mineralogy are silica-saturated trachyandesite (5% melt fraction, 3% H₂O) to silica-oversaturated basaltic andesite (8% melt fraction, 4.5% H₂O). Both compositions may be classified as ‘shoshonites’ on the basis of normative compositions, silica-saturation, and K/Na ratio. Decompression melting of metasomatized lithospheric lherzolite with minor phlogopite and pargasite may produce primary ‘shoshonitic’ magmas by dehydration melting at 1 GPa, 1050–1150 °C. Such magmas may be parental to Proterozoic batholithic syenites occurring in Brazil.     

Modelling frequency distributions of 5 minute-averaged solar radiation indexes using Beta probability functions

Summary ¶Five minute-averaged values of sky clearness, direct and diffuse indices, were used to model the frequency distributions of these variables in terms of optical air mass. From more than four years of solar radiation observations it was found that variations in the frequency distributions of the three indices of optical air mass for Botucatu, Brazil, are similar to those in other places, as published in the literature. The proposed models were obtained by linear combination of normalized Beta probability functions, using the observed distributions derived from three years of data. The versatility of these functions allows modelling of all three irradiance indexes to similar levels of accuracy. A comparison with the observed distributions obtained from one year of observations indicate that the models are able to reproduce the observed frequency distributions of all three indices at the 95% confidence level.Received September 2, 2002; revised February 28, 2003; accepted March 16, 2003 Published online September 10, 2003     

Threshold for particle entrainment into suspension

ABSTRACT Laboratory observations regarding the limit conditions for particle entrainment into suspension are presented. A high‐speed video system was used to investigate conditions for the entrainment of sediment particles and glass beads lying over a smooth boundary as well as over a rough bed. The results extend experimental conditions of previous studies towards finer particle sizes. A criterion for the limit of entrainment into suspension is proposed which is a function of the ratio between the flow shear velocity and particle settling velocity. Observations indicate that particles totally immersed within the viscous sublayer can be entrained into suspension by the flow, which contradicts the conclusions of previous researchers. A theoretical analysis of the entrainment process within the viscous sublayer, based on force–balance considerations, is used to show that this phenomenon is related to turbulent flow events of high instantaneous values of the Reynolds stress, in agreement with previous observations. In the case of experiments with a rough bed, a hiding effect was observed, which tends to preclude the entrainment of particles finer than the roughness elements. This implies that, as the ratio between particle and roughness element sizes becomes smaller, progressively higher bed shear stresses are required to entrain particles into suspension. On the other hand, an overexposure effect was also observed, which indicates that a particle moving on a smooth bed is more prone to be entrained than the same particle moving on a bed formed by identical particles.     

Study of celestite flotation efficiency using sodium dodecyl sulfonate collector: factorial experiment and statistical analysis of data

Flotation tests of synthetic mixtures of celestite (SrSO₄) and calcite (CaCO₃) minerals using sodium dodecyl sulfonate as collector were carried out using a factorial experimental design 2³. The independent experimental variables included celestite grade in the feed (50% and 90% SrSO₄), conditioning pH (6.5 and 9) and sodium silicate depressant concentration (10⁻⁵ and 10⁻³ M). All experiments were performed at a constant collector concentration (10⁻⁴ M) and conditioning time of 15 min. The response variables were recovery and grade of SrSO₄ in the concentrate.The factors that had the greatest effect on the grade and recovery of celestite were the celestite grade in the feed (L) and the depressant concentration (C); also the combination of these factors significantly affected the response variables. The highest celestite yield (96% recovery, 98% grade) was obtained when a 90% of celestite grade in the feed was used.     

Taxonomy, facies relationships and palaeobiology of bakevelliid bivalves from the Lower Cretaceous of west-central Argentina

Cretaceous bakevelliids in Argentina are restricted to the Lower Cretaceous. They are recorded in shallow marine deposits in two Mesozoic basins located in the Andes foothills in Patagonia. In the Austral Basin (44°–55°S) there is only one genus, Gervillella, represented by a single specimen from the Barremian. In the Neuquén Basin (30°–40°S) two genera, Gervillaria and Gervillella, occur, ranging from the Berriasian to the Lower Barremian. In the Pilmatué Member of the Agrio Formation two species are identified: Gervillaria alatior (Imlay) and Gervillella aviculoides (J. Sowerby). The former is also recorded in Mexico while the latter is more widespread, occurring in Europe, Asia, and Africa. In the Bajada del Agrio section they come from eight tabular shell beds located near and on top of shallowing-upwards cycles. They were abundant only in four of these levels. These shell beds are interpreted as having been deposited in the mid-ramp (middle of cycles), and upper mid-ramp (top of cycles). A functional analysis of shells revealed two life habits: epibyssate and endobyssate.     

Occurrence of springs in massifs of crystalline rocks,northern Portugal

An inventory of artesian springs emerging from fractures (fracture springs) was conducted in the Pinh?o River Basin and Morais Massif, northern Portugal, comprising an area of approximately 650 km². Over 1,500 springs were identified and associated with geological domains and fracture sets. Using cross-tabulation analysis, spring distributions by fracture sets were compared among geological environments, and the deviations related to differences in rock structure and, presumably, to differences in deformational histories. The relation between spring frequencies and rock structures was further investigated by spectral determination, the model introduced in this study. Input data are the spring frequencies and fracture lengths in each geological domain, in addition to the angles between fracture strikes and present-day stress-field orientation (θ). The model's output includes the so-called intrinsic densities, a parameter indexing spring occurrence to factors such as fracture type and associated deformational regime and age. The highest densities (12.2 springs/km of lineament) were associated with young shear fractures produced by brittle deformation, and the lowest (0.1) with old tensional and ductile fractures. Spectral determination also relates each orientation class to a dominant structural parameter: where spring occurrence is controlled by θ, the class is parallel to the present-day stress-field orientation; where the control is attributed to the length of fractures, the spring occurrence follows the strike of large-scale normal faults crossing the region. Electronic Publication     

High-temperature deformation in the Neoproterozoic transpressional Ribeira belt, southeast Brazil

The Neoproterozoic Ribeira belt is subdivided in two domains with contrasting tectonic characteristics. The northern domain is dominated by shallowly dipping foliations and orogen-normal thrust tectonics. The southern domain is characterized by a 1000-km-long network of anastomosing transcurrent shear zones parallel to the belt. This contrast is interpreted as reflecting continent–continent convergence that is almost orthogonal to the margins in the northern domain and significantly oblique in the southern domain. The central, transitional, domain of the Ribeira belt displays the northern termination of the transcurrent shear zone network: the Além Paraíba–Pádua shear zone system (APPSS). The 250-km-long Além Paraíba–Pádua system involves granulites facies mylonites deformed through transpression.A detailed study of the microstructure and lattice preferred orientation (LPO) of the rock-forming minerals in these granulite mylonites allow a better understanding of deformation mechanisms active at high temperature in the crust. Plagioclase crystals are plastically deformed; they display curved twins and cleavages, mechanical twins, and evidence of dynamic recrystallization. LPO of plagioclase is consistent with activation of the (010) [100] and (010) [001] slip systems. LPO of orthopyroxene and amphibole indicates that these minerals have been deformed through dislocation creep with the activation of the (100) [001] slip system. Quartz in granulite mylonite displays evidence of extensive growth through grain boundary migration. The LPO of quartz is therefore the result of a static transformation of an initial, syn-kinematic LPO, and cannot be straightforwardly interpreted in terms of deformation mechanisms active during mylonitization.     

Argiles et zéolites dans l'altération d'un volcan bouclier en milieu tropical (Le Piton des Neiges,La Réunion)

The drilling of a gallery through the Roche-Écrite massif (Reunion Island) allowed to sample the old formations of the ‘Piton des Neiges’ volcano. The mineralogical study of the alteration products of the formations showed significant variations of the zeolites/clay minerals ratio depending on the location of the rocks in the volcano. The abundance of zeolites in the formation near the surface hydrographic network or the underground water drainage system seems to be due to the physicochemical processes favouring zeolites in more open systems in their competition with secondary clays. To cite this article: L. Bret et al., C. R. Geoscience 335 (2003).