Quality assessment of GPS reprocessed terrestrial reference frame

The International GNSS Service (IGS) contributes to the construction of the International Terrestrial Reference Frame (ITRF) by submitting time series of station positions and Earth Rotation Parameters (ERP). For the first time, its submission to the ITRF2008 construction is based on a combination of entirely reprocessed GPS solutions delivered by 11 Analysis Centers (ACs). We analyze the IGS submission and four of the individual AC contributions in terms of the GNSS frame origin and scale, station position repeatability and time series seasonal variations. We show here that the GPS Terrestrial Reference Frame (TRF) origin is consistent with Satellite laser Ranging (SLR) at the centimeter level with a drift lower than 1 mm/year. Although the scale drift compared to Very Long baseline Interferometry (VLBI) and SLR mean scale is smaller than 0.4 mm/year, we think that it would be premature to use that information in the ITRF scale definition due to its strong dependence on the GPS satellite and ground antenna phase center variations. The new position time series also show a better repeatability compared to past IGS combined products and their annual variations are shown to be more consistent with loading models. The comparison of GPS station positions and velocities to those of VLBI via local ties in co-located sites demonstrates that the IGS reprocessed solution submitted to the ITRF2008 is more reliable and precise than any of the past submissions. However, we show that some of the remaining inconsistencies between GPS and VLBI positioning may be caused by uncalibrated GNSS radomes.     

ITRF2008: an improved solution of the international terrestrial reference frame

ITRF2008 is a refined version of the International Terrestrial Reference Frame based on reprocessed solutions of the four space geodetic techniques: VLBI, SLR, GPS and DORIS, spanning 29, 26, 12.5 and 16?years of observations, respectively. The input data used in its elaboration are time series (weekly from satellite techniques and 24-h session-wise from VLBI) of station positions and daily Earth Orientation Parameters (EOPs). The ITRF2008 origin is defined in such a way that it has zero translations and translation rates with respect to the mean Earth center of mass, averaged by the SLR time series. Its scale is defined by nullifying the scale factor and its rate with respect to the mean of VLBI and SLR long-term solutions as obtained by stacking their respective time series. The scale agreement between these two technique solutions is estimated to be 1.05 ± 0.13 ppb at epoch 2005.0 and 0.049 ± 0.010?ppb/yr. The ITRF2008 orientation (at epoch 2005.0) and its rate are aligned to the ITRF2005 using 179 stations of high geodetic quality. An estimate of the origin components from ITRF2008 to ITRF2005 (both origins are defined by SLR) indicates differences at epoch 2005.0, namely: ?0.5, ?0.9 and ?4.7?mm along X, Y and Z-axis, respectively. The translation rate differences between the two frames are zero for Y and Z, while we observe an X-translation rate of 0.3?mm/yr. The estimated formal errors of these parameters are 0.2?mm and 0.2?mm/yr, respectively. The high level of origin agreement between ITRF2008 and ITRF2005 is an indication of an imprecise ITRF2000 origin that exhibits a Z-translation drift of 1.8?mm/yr with respect to ITRF2005. An evaluation of the ITRF2008 origin accuracy based on the level of its agreement with ITRF2005 is believed to be at the level of 1?cm over the time-span of the SLR observations. Considering the level of scale consistency between VLBI and SLR, the ITRF2008 scale accuracy is evaluated to be at the level of 1.2?ppb (8?mm at the equator) over the common time-span of the observations of both techniques. Although the performance of the ITRF2008 is demonstrated to be higher than ITRF2005, future ITRF improvement resides in improving the consistency between local ties in co-location sites and space geodesy estimates.     

Pathogenic fungi: an unacknowledged risk at coastal resorts? New insights on microbiological sand quality in Portugal

Whilst the potential impact on beach users from microorganisms in water has received considerable attention, there has been relatively little investigation into microbial contaminants in sand. Thirty three beaches across Portugal were analyzed during a five year period (2006-2010) to determine the presence of yeasts, pathogenic fungi, dermatophytes, total coliforms, Escherichia coli and intestinal enterococci in sand.Our results showed that 60.4% of the samples were positive for fungi and that 25.2% were positive for the bacterial parameters. The most frequent fungal species found were Candida sp. and Aspergillus sp., whereas intestinal enterococci were the most frequently isolated bacteria. Positive associations were detected among analyzed parameters and country-regions but none among those parameters and sampling period.Regarding threshold values, we propose 15 cfu/g for yeasts, 17 cfu/g for potential pathogenic fungi, 8 cfu/g for dermatophytes. Eighty four cfu/g for coliforms, 250 cfu/g for E. coli, and 100 cfu/g for intestinal enterococci.     

Sequential melting and fractional crystallization: Granites from Guarda-Sabugal area, central Portugal

Seven distinct phases of Variscan two-mica granite are recognized in the Guarda-Sabugal area. They intruded the Cambrian schist-metagraywacke complex, crystallized in the middle crust, and are syn- to late-D3 (309.2 ± 1.8 Ma), late-D3 (304–300 Ma) and late- to post-D3 (299 ± 3 Ma; ID-TIMS ages on zircon and monazite). Two of the granites, G2 and G5, are close in age and have similar Sr, Nd and O isotope characteristics but contrasting whole rock and mineral features and formed by sequential increasing degree of partial melting of a common metasedimentary protolith. During sequential melting Ti, total Fe, Mg, Ca, Zr, Zn, Sr, Ba and REE contents and (La/Yb)_N increase and Si and Rb contents decrease, plagioclase becomes richer in anorthite and biotite and muscovite richer in Ti and Mg. Each of these granites evolved subsequently by fractional crystallization of quartz, K-feldspar, plagioclase, biotite and ilmenite, defining separate series G2–G3–G7 and G5–G6 containing late Sn-bearing differentiates. Two other granites G1 and G4 represent distinct pulses of magma with individual fractionation trends for major and trace elements and distinct (⁸⁷Sr/⁸⁶Sr)₃₀₀, ?Nd₃₀₀ and δ¹⁸O values.     

Food Web Structure and Habitat Connectivity in Fish Estuarine Nurseries—Impact of River Flow

River flow variability is known to influence estuarine production, yet knowledge on its effect upon estuarine food webs dynamics is still scarce. Stable carbon and nitrogen isotopes were used to assess the effect of river flow in the connectivity and food web interactions between the two main fish nursery areas of the Tagus estuary. The aims of the present work were to investigate the seasonal variation in food web structure and the exchange rate of individuals of marine juvenile fish among estuarine nurseries, to compare the spring of a rainy year (2001) with that of an average year (2000), and to investigate the impact of the winter floods of 2001. A low level of connectivity was observed for the fish species that use these areas as nurseries. In low river flow conditions, two isotopically distinct food webs were established in each nursery area. These food webs were very sensitive to small variations in the freshwater input. Winter floods seem to disrupt the localized food webs that are established in low river flow periods, leading to the re-establishment of a wider food web. While in rainy years this wide food web is maintained until spring, in average years the food web undergoes fragmentation into two localized and isotopically distinctive food webs. The increase in frequency of droughts due to climate change should lower the connectivity of the estuarine fish nurseries food webs, causing habitat fragmentation and consequent loss in complexity and resilience.     

Aspects of sand behaviour by modified constant shear drained tests

Constant shear drained tests (CSD) are probably the most suitable to simulate the strength and deformation behaviour of soils in slopes under water infiltration conditions or lateral stress relief. This is significant because soil behaviour following a CSD stress path could differ from that of traditional compression triaxial tests. In this paper, CSD tests on sand following an alternative procedure are presented and discussed. The modified CSD tests were conducted by increasing the pore water pressure at a constant rate from one end of the specimen with water free to drain from the opposite end. Among the results from specimens consolidated at variable initial void ratios and principal stress ratios it was revealed that specimens showed a tendency to dilate even for loose sands; failure was reached at low axial strains; and a pre-failure type of instability could be identified. The modified procedure has the potential to provide new insights into the failure mechanisms of slopes under a water infiltration condition.     

Chemistry of the Ferraria thermal water, S. Miguel Island, Azores: mixing and precipitation processes

The Ferraria thermal water emerges at the sea level in the Ferraria lava delta (western edge of S. Miguel Island, Azores) with temperature of ca. 60°C and pH varying between 5.4 and 6.2. It is of sodium chloride type, resulting from ca. 50% seawater mixing with an acid brackish, at ≈100°C, denoting the presence of significant CO₂(g) and the progress of water–rock interactions in open system conditions. The thermal Na–Cl water is strongly enriched with Sr and Mn and, comparatively, has low concentrations in Al, Fe and As. These elements are removed from the solution as critical conditions for the formation of several neo-formed mineral phases are gradually attained. Thermodynamic equilibrium calculations are consistent with this interpretation, showing that the thermal fluid can precipitate Fe³⁺-(hydr-)oxides, kaolinite and non-crystalline silica. Wells logging show fracture planes and pores fully/partly filled up with polyphase botryoidal aggregates mostly composed of goethite + ferrihydrite and displaying variable adsorbed contents of Si, P and As. These neo-formed phases result from the pristine fluid oxidation due to seawater mixing; its precipitation is easily affected by pH and redox variations of the brackish, due to volcanic gases pressure alterations, and fluid pressure or flow-velocity oscillation in the fractured aquifer.     

Differences in the neighborhood: Structural variations in the carapace of shore crabs Carcinus maenas (Decapoda: Portunidae)

The present study compared the carapace structure of Carcinus maenas in two nearby sites (2 km apart) within Minho estuary, submitted to different physicochemical and ecological conditions (water temperature, pH, crabs’ density and sex ratio). The carapace structure of the carapace and chelae of the crabs presented significant differences between sampling sites (t-test; p < 0.01). The SIMPER analysis revealed that the Weight/CW and Thickness/CW ratios explained all the dissimilarities found among sites. Overall, the male carapace was proportionally thicker at station 2 (t-test; p < 0.01), while the female carapace was proportionally thicker at station 1 (t-test; p < 0.001). A thicker carapace can be advantageous when competing for food or a sexual partner. We hypothetized that, since at station 2, the density of individuals was twice higher than at station 1, it is likely that agonistic encounters are more frequent, thus favouring a thicker carapace.