Variations of levels and composition of PM10 and PM2.5 at an insular site in the Western Mediterranean

The insular suburban site of Castillo de Bellver was selected for the study of the variability of PM levels and composition in the Western Mediterranean Basin (WMB).Mean annual (in 2004) PM₁₀ and PM_2.5 levels at this site were 29 and 20 µg/m³, respectively. These levels may be regarded as relatively low when compared with other suburban insular locations in the Eastern Mediterranean Basin (EMB), but they are higher than those recorded at most of the European suburban sites, especially in Northern and Western Europe. Seasonal variability of PM levels at this site is governed by meteorology rather than local emissions, whereas the daily cycles are clearly defined by the anthropogenic emissions, mainly coming from the urban area of Palma de Mallorca and the harbour area of the same city.Concerning the aerosol composition at this site, the main PM constituent is the mineral matter (29% in PM₁₀ and 16 % in PM_2.5), more than 50% (in PM₁₀) being attributable to African dust. The amount of secondary inorganic aerosols is also very high (27% in PM₁₀ and 34% in PM_2.5), with the predominance of fine ammonium sulphate, and in a less proportion fine ammonium nitrate (in winter) and coarse Ca and Na nitrate (with higher importance in summer). The carbonaceous particles, dominantly fine, account for 17% of PM₁₀ and 25% of PM_2.5. The elemental carbon/organic carbon (EC/OC) ratio reached a mean value of 0.17, similar to those observed at regional background sites in the WMB coast of Spain. The sea spray aerosols (mainly coarse) represented around 10% of PM₁₀, and only 4% in PM_2.5. Finally, the unaccounted fraction increased from 15% to 20% in PM_2.5, being mostly attributed to water.The concentrations of trace elements in PM₁₀ and PM_2.5 were usually in the range to those observed in regional background sites in the Iberian Peninsula, with the exception of the typical tracers of road traffic such as Cu, Sb, Zn, Sn and Ba, which presented concentrations in the range of urban sites of Iberia. Other elements such as Cr, Zr, Hf and Co have been identified as the main tracers of the harbour contributions.     

Rainfall intensity patterns derived from the urban network of Barcelona (NE Spain)

Theoretical and Applied Climatology - An analysis of the normalised rainfall intensity curves in Barcelona (NE Spain) has been undertaken from 41 selected rain rate episodes recorded by an urban...     

Silver and lead in high-altitude lake sediments: Proxies for climate changes and human activities

High-altitude lake sediments are often used as archives for environmental changes and their chemical and isotopic compositions provide significant constraints on natural and anthropogenic long-term changes that have occurred in their catchment area. Here, trace-element concentrations and Pb isotopes are presented for two sedimentary cores from Lake Blanc Huez in the French Alps, to trace the impact of climate changes and human activities over the Holocene. Lead and Ag contents are very high and clearly dominated by input from a Pb–Ag vein located a few meters from the lakeshore, a vein that also buffers the Pb isotopes. Mining of this vein in medieval times is recorded in the corresponding lake sediments with high Ag content coupled with high Pb/U ratio. These chemical characteristics can be used to constrain the major Holocene climate changes. Significant advances of glaciers next to the lake produced sediments with Ag and Pb concentration peaks and high Pb/U ratios due to accelerated erosion of the Pb–Ag vein, similar to the effects of the medieval mining. In contrast, reduced glacier activity led to the formation of organic-rich sediments with high U and As contents and low Pb/U ratios. More generally, the observed combination of chemical changes could be used elsewhere to decipher environmental changes over long periods of time.     

Benthic indicators and index approaches in the three main estuaries along the French Atlantic coast (Seine, Loire and Gironde)

The three main estuaries in the French Atlantic coast – the Seine, Loire and Gironde, all with high tidal regimes – are interfaces between the continental and the coastal ecosystems. The Seine and Gironde are highly contaminated, whereas the Loire remains in a more natural state. Both the Seine and Gironde have suffered from harbour construction, and as a result, their biological units are extremely compartmentalized. Benthic species and communities have adapted to tolerate temporal physical and chemical changes ( e.g. salinity, substrata, depth, and levels of fine particles and oxygen) and human activities ( e.g. dredging, shipping traffic, and habitat reduction). Although numerous bio-indicators and indices are used to define the ecological quality status (EcoQS) of coastal waters, very few of them were developed specifically for environments with a mosaic of conditions and salinity levels, including freshwater. The main problem appears to be that all the indices for determining anthropogenic stress examine the abundances of stress-tolerant species, which may also be able to tolerate natural stressors such as those occurring in estuaries. This paper takes a look at the development status of the benthic indicators and index approaches used in the three main estuaries along the French Atlantic coast. In addition, it examines the adaptation of the different benthic indicators to the taxonomic sufficiency principle, and the adaptation of the Benthic Opportunistic Polychaetes Amphipods index (BOPA) and the Benthic Opportunistic Annelida Amphipod index (BO2A) for use in the freshwater zones of transitional waters ( i.e. up to the upper limit of the tidal range). Several perspectives are discussed in light of the diverse disturbances and the heterogeneity of such stressed zones, such as the use of multimetric and scoring approaches.     

Practical aspects of demand and capacity evaluation of RC members in the context of EC8‐3

The structural safety assessment procedures proposed in Part 3 of Eurocode 8 (EC8‐3) for the case of reinforced concrete structures are addressed. The practical evaluation of the member chord rotation demand according to EC8‐3 is examined in detail along with several alternative formulations. The need for these formulations is demonstrated by presenting example situations where the EC8‐3 proposal is difficult to apply. The effectiveness of the proposed approaches is assessed through an example application and recommendations for their practical use are defined. Given the importance of the shear span in this context, a sensitivity analysis of the EC8‐3 capacity models with respect to this parameter is carried out and discussed in a later section. This analysis aims to assess the validity of the simplifications proposed by a previous research study for the quantification of the EC8‐3 capacity values. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of soil-engineering properties on the failure mode of shallow landslides

Some landslides mobilize into flows, while others slide and deposit material immediately down slope. An index based on initial dry density and fine-grained content of soil predicted failure mode of 96 landslide initiation sites in Oregon and Colorado with 79% accuracy. These material properties can be used to identify potential sources for debris flows and for slides. Field data suggest that loose soils can evolve from dense soils that dilate upon shearing. The method presented herein to predict failure mode is most applicable for shallow (depth <5?m), well-graded soils (coefficient of uniformity >8), with few to moderate fines (fine-grained content <18%), and with liquid limits <40.     

Mesozoic Evaniidae (Insecta: Hymenoptera) in Spanish Amber: Reanalysis of the Phylogeny of the Evanioidea

<正>One new genus and five new species of the family Evaniidae are described from the Early Cretaceous (Albian)Spanish amber of Penacerrada-Ⅰ(Province of Burgos),San Just and Arroyo de la Pascueta(both in the Province of Teruel):Cretevania alonsoi sp.nov.,C.montoyai sp.nov.,C.alcalai sp.nov.,C.rubusensis sp.nov.,and Iberoevania roblesi gen.and sp.nov.Taxonomic changes include Cretevania pristina(Zhang and Zhang,2000) comb.nov.,C.exquisita(Zhang,Rasmtsyn,Wang and Zhang,2007)comb.nov.,C.vesca(Zhang,Rasnitsyn,Wang and Zhang,2007)comb.nov.,and C.cyrtocerca(Deans,2004)comb.nov.,as a result of the reinterpretation of the genera Procretevania and Eovernevania.The new well preserved specimens of the genus Cretevania,together with the characters shown by the type specimens of the synonymized genera,give new information about their anatomical characters of taxonomical importance,and the genus Cretevania Rasnitsyn,1975 is re-diagnosed.The holotypes of the Russian species in amber have been revised.A cladistic analysis of fossil and extant groups of the superfamily Evanioidea is included.Cretevania had a wide palaeogeographic distribution,with the highest diversity known from Spain.The 13 known Cretevania species show a high interspecific variation mainly in wing characteristics,and a wide range of body and wing size.