UPPER CRUSTAL VELOCITY STRUCTURE AND CONSTRAINING FAULT INTERPRETATION FROM SHUNYI-TANGGU REFRACTION EXPERIMENT DATA

The urban active fault survey is of great significance to improve the development and utilization of urban underground space, the urban resilience, the regional seismic reference modeling, and the natural hazard prevention. The Beijing-Tianjin metropolitan region with the densest population is one of the most developed and most important urban groups, located at the northeastern North China plain. There are several fault systems crossing and converging in this region, and most of the faults are buried. The tectonic setting of the faults is complex from shallow to deep. There are frequent historical earthquakes in this area, which results in higher earthquake risk and geological hazards. There are two seismicity active belts in this area. One is the NE directed earthquake belt located at the east part of the profile in northern Ninghai near the Tangshan earthquake region. The other is located in the Beijing plain in the northwest of the profile and near the southern end of Yanshan fold belt, where the 1679 M8.0 Sanhe-Pinggu earthquake occurred, the largest historical earthquake of this area. Besides, there are some small earthquake activities related to the Xiadian Fault and the Cangdong Fault at the central part of the profile.
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey.     

含油岩石弹性特征及其与油气的关系

本文用准噶尔盆地东部油区58口井共2257块油气储层岩芯标本,在常温常压和模拟地下温度压力下对V_P/V_S及衰减系数进行了精确测量,结合密度、孔隙度及岩石学研究获得个同岩性地层含油、水、气不同流体的V_P/V_S比、泊松比及不同深度的速度校正曲线;用回归分析获得V_P-V_S,密度-速度,密度-孔隙度的相关关系式;用数学统计获得稠油地区岩芯砂岩的速度特征值;用AVO技术进行模型计算和实例验证.为油气碳氢检测,测井速度标定,声阻抗及演,模型正演等提供了有价值的数据.     

中层耗散大气中Rossby波包的非线性相互作用理论

采用弱非线性近似得出中层耗散大气连续谱Ｒｏｓｓｂｙ波包的非线性时空演化方程,讨论了Ｒｏｓｓｂｙ波包的三波相互作用问题．数值计算表明,耗散和非线性的共同效应决定了Ｒｏｓｓｂｙ波包的演变．当一个Ｒｏｓｓｂｙ波包通过大气传播时,它的振幅若超过某个阈值,空间尺度分别比它大和比它小的两个次级Ｒｏｓｓｂｙ波包的振幅会随时间增长．特别当这两个次级波包同时随时空变化时,仅当主波的振幅超过一个更大的阈值,且其群速度介于两次级波包的群速度之间时,两次级波包的振幅才会随时空同时增长,即出现绝对不稳定现象,耗散和３个波包的频率失配都会增大不稳定的阈值．     

变密度体重力勘探反演的多解性问题

本文利用经典位论中格林层的概念,证明了: 1.在一个物体内可以有多种密度分布,使其总质量为零,在物体外任一点的位为零; 2.当总质量不变时,在一个固定形状及体积的物体中,可以有多种密度分布,并且处处密度为正,使物体外任一点的位相同; 3.当总质量不变时,在不同形状及不同体积的物体内,可以有多种密度分布,并且处处密度为正,使物体外任一点的位相同。 由此得出结论:总质量不变,若物体的密度不均匀（而且处处为正）,根据重力异常作反演,不能唯一地求出物体的形状;当物体的形状已知时,也不能唯一地求出其密度分布。     

中国区域地理、地形因子对降水分布影响的估算和分析

不同与以往基于最小二乘的多元线性回归方法,本文首次尝试将新型的第二代回归分析方法——偏最小二乘回归分析方法应用到中国区域的降水建模中．利用区域内394个气象观测站建站到2000年45年(及以上)的降水资料,建立了一个简单的年、季降水量和地理、地形因子(包括纬度、经度、地形高程、坡度、坡向和遮蔽度)的关系模型,估算了区域降水量中地理、地形的影响部分,并分析了这种影响的特征．结果表明,用此方法建立的模型能够解释70%以上的因变量的变异,相关系数基本都在0.84以上,经交叉有效性检验,模型的回归效果较显著．分析表明,在多元线性回归不适用的情况下,本文基于偏最小二乘法的简单模型能够比较准确地定性、定量地再现实际降水分布．     

利用区域宽频带数据反演鲁甸MS6.5级地震震源破裂过程

基于有限断层模型反演方法,我们利用区域宽频带数据反演得到了2014年8月3日鲁甸M_S6.5级地震的震源破裂过程.反演结果显示：此次地震的发震断层走向为北北西向,破裂主要以左旋走滑为主,位移主要发生在震源左上方,最大滑动量为0.7 m,模型显示断层破裂可能接近地表,破裂长度约10 km.此次地震释放的标量地震矩为1.97×10¹⁸ N·m,相当于矩震级为M_w 6.1,地震能量主要在前15 s释放.鲁甸地震有四个显著的特点：（1）位移主要集中在浅部,从11 km起破点开始迅速向上传播,大部分位于10 km以上且最大位移位于深度3 km处,从模型来看,破裂可能接近地表,因此地表震动较为强烈;（2）应力降比较大,计算显示释放的同震静态应力降约为2.8 MPa;（3）破裂速度较快,在地表附近超过了2.5 km·s^-1;（4）主震可能发生在一个共轭断层系上.这四个特点可能是导致此次地震造成如此重大人员伤亡和财产损失的最重要的原因.     

Carbon isotope ratios of C_4 plants in loess areas of North China

Recent stable carbon isotope studies have shown that the occurrence of C4 plants on the Earth was much later than that of C3 plants and there was a global ex-pansion of C4 biomass around 5―8 million years ago[1]. Although far fewer species use the C4 pat…     

Turbulence fields in the lee of two‐dimensional transverse dunes simulated in a wind tunnel

The turbulence field of airflow in the lee of a dune has significant impacts on dune dynamics and related processes. We used particle image velocimetry in a wind tunnel simulation to obtain detailed velocity measurements in the lee of two‐dimensional transverse dune models, then used the results to analyse their turbulence fields. The dune models used in this study had a single lee angle of 30°, and a total of six stoss angles: 3°, 5°, 10°, 15°, 20° and 25°. We used vorticity, turbulence intensity, Reynolds stress and turbulent kinetic energy to characterize the turbulence fields. These parameters were functions of stoss angle, wind velocity, distance from the dune crest and height above the ground surface. The stoss angles could generally be divided into two groups based on the profiles of mean velocity, turbulence and Reynolds stress. Stoss angles of 3° and 5° usually had similar profiles, and angles of 15°, 20° and 25° formed a second group with similar profiles. The profiles for the stoss angle of 10° were usually transitional and were intermediate between the two groups. Vorticity, Reynolds stress and turbulent kinetic energy increased monotonically with increasing free‐stream wind velocity, but their variations with respect to the stoss angle were complex. The stoss angles of 15° and 20° had the maximum values of these three parameters, thus these angles may have special significance in dune development given the characteristics of the mean velocity fields and turbulence fields they produce within the lee airflow. It is the streamwise velocity component and its turbulence that determine the surface shear stress. Copyright © 2008 John Wiley and Sons, Ltd.     

华南连县─博罗─港口地带地壳结构及速度分布的爆炸地震探测结果

在华南连县-博罗-港口地区200多个观测点上取得700多道地震记录,并绘制成6张地震记录剖面图．经过分析处理,识别出下列波组：来自地壳浅层的P波组,地壳中各界面的反射组有：P_1,P_2,P_3和P_4,莫霍面的反射波组P_m,以及上地幔顶部的折射波组P_n．经分析解释得出初步结果：①通过P震相的处理,构制了测线下方浅层地壳结构和速度分布图,它与测线穿过的断裂构造带有较好的相关性。②该地区莫霍面的反射波组P_m清晰,求得地壳平均速度为6．25km／s左右．在清远至连县之间,地壳厚度为32-34km．博罗、惠东一带地壳厚度为30km,惠东至港口之间为29．5km,说明该地区莫霍面起伏不大．地壳厚度由北向南和由西向东有逐步变薄的趋势。③观测距离较长的地震剖面图上清晰地记录到上地幔顶部的P_n民震相,该震相从140km处开始以初动出现,能量强,可追踪到200km,求得的P_n速度分别为：港口-惠东-博罗一带为8.05km／s,博罗-从化-清远一带为8．06km／s,由西向南的大湾-清远-从化-博罗一带为8．13km／s,考虑到莫霍面的起伏因素,该区P_n速度值以取8.06km／s为宜。④得到...     

高阶谱混合方法地震子波估计及处理

凭借高阶累积量对噪声的不敏感性,依据地震记录高阶谱中包含的子波相位、幅值信息,提出了基于双谱和三谱混合的子波恢复方法,并对理论合成记录进行子波估计及处理模拟试验,其结果论证了该方法的可行性.同时,用本文介绍的方法对野外采集的地震资料进行处理后,其分辨率明显提高,说明了高阶谱技术在资料处理方面有相当大的潜力.