Advanced glycation endproducts in 35 types of seafood products consumed in eastern China

Advanced glycation endproducts(AGEs) have been recognized as hazards in processed foods that can induce chronic diseases such as cardiovascular disease, diabetes, and diabetic nephropathy. In this study, we investigated the AGEs contents of 35 types of industrial seafood products that are consumed frequently in eastern China. Total fluorescent AGEs level and Nε-carboxymethyl-lysine(CML) content were evaluated by fluorescence spectrophotometry and gas chromatography-mass spectrometry(GC-MS), respectively. The level of total fluorescent AGEs in seafood samples ranged from 39.37 to 1178.3 AU, and was higher in canned and packaged instant aquatic products that were processed at high temperatures. The CML content in seafood samples ranged from 44.8 to 439.1 mg per kg dried sample, and was higher in roasted seafood samples. The total fluorescent AGEs and CML content increased when seafood underwent high-temperature processing, but did not show an obvious correlation. The present study suggested that commonly consumed seafood contains different levels of AGEs, and the seafood processed at high temperatures always displays a high level of either AGEs or CML.     

Glacier changes in the eastern Nyainqêntanglha Range of Tibetan Plateau from 1975 to 2013

Maritime-type glaciers in the eastern Nyainqêntanglha Range, located in the southeastern part of the Tibetan Plateau, are an important water source for downstream residents and ecological systems. To better understand the variability of glaciers in this region, we used the band ratio threshold(TM3/TM5 for the Landsat TM /ETM+ and TM4/TM6 for Landsat OLI) to extract glacier outlines in ~1999 and ~2013. After that, we also generated a series of glacier boundaries and monitored glacier variations in the past 40 years with the help of the Chinese Glacier Inventory data(1975) and Landsat TM, ETM+ and OLI data. The total glacier area decreased by 37.69 ± 2.84% from 1975 to 2013. The annual percentage area change(APAC) was ~1.32% a-1 and ~1.29% a-1 in the periods 1975-1999 and 1999-2013, respectively. According to the lag theory, the reaction time is probably about 10 years and we discuss the variations of temperature and precipitation between 1965 and 2011. Temperature and precipitation increased between 1965 and 2011 at a rate of 0.34°C /10 a and 15.4 mm/10 a, respectively. Extensive meteorological data show that the glacier shrinkage rate over the period may be mainly due to increasing air temperature, while the increasing precipitation partly made up for the mass loss of glacier ice resulting from increasing temperature may also lead to the low APAC between 1999 and 2013. The lag theory suggests that glacier shrinkage may accelerate in the next 10 years. Small glaciers were more sensitive to climate change, and there was a normal distribution between glacier area and elevation. Glaciers shrank in all aspects, and south aspects diminished faster than others.     

胶东埠上金矿煌斑岩地球化学特征及成因

大量的研究资料表明煌斑岩与金矿在空间上、时间上具明显的对应关系。埠上金矿位于胶东玲珑金矿田西南方向的金岭金矿田的中北部;有关该矿区煌斑岩的研究资料较少。该文结合岩石学、矿物学、大地构造学等特征,对区内煌斑岩的地球化学进行了研究,揭示其内在成因,认为区内煌斑岩是因该区受到古太平洋板块的俯冲、华北板块与杨子板块碰撞造山及郯庐断裂带等构造岩浆活动的影响,俯冲洋壳析出的流体交代地幔形成的具氧化性的EM1型富集型地幔岩浆于造山拉张期在大陆活动边缘浅成侵入而成的。     

新疆额尔宾山花岗岩侵位年龄和成因及其对南天山洋闭合时代的限定

额尔宾山花岗岩岩体位于南天山晚古生代侵入岩带,对该花岗岩进行锆石U-Pb定年获得296.1±1.8Ma的年龄,为早二叠世。岩石主量元素分析结果表明,该花岗岩的Si O2含量为66.96%~67.3%,富碱(Na2O+K2O=7.53%~7.97%),K2O/Na2O1(1.15~1.27),属高钾钙碱性系列岩石;Al2O3为15.56%~15.62%,Al2O3K2O+Na2O+Ca O,属于过铝型。岩石稀土元素配分模式呈现轻稀土元素(LREE)富集((La/Yb)N=27.03~30.62)、重稀土元素(HREE)亏损((LREE/HREE)=18.2~20.1)、具有中等程度的负Eu异常(δEu=0.64~0.68)。微量元素判别结果显示,其具有I-A型花岗岩过渡的特征。结合区域地质背景综合分析,初步认定该岩体可能形成于南天山同碰撞向后碰撞构造体制转换时期,据此可以推测南天山洋盆闭合时限至少应该在早二叠世以前。     

西藏白朗南部地区三叠纪地层沉积环境及物源

综合露头剖面、砂岩碎屑组分、地球化学、阴极发光等资料的研究,对西藏白朗地区南部三叠系沉积环境及物源开展了研究。该区三叠纪地层以灰黑色泥岩、浅灰白色石英砂岩、长石石英砂岩、灰色灰岩为主,沉积背景为拉轨岗日被动陆缘盆地的浅海-半深海环境。碎屑岩及其地球化学分析结果反映,物源总体来自克拉通内部。阴极发光结果表明,物源区石英主要为变质成因,次为火成岩成因。综合判定,研究区该套地层为下—中三叠统吕村组和上三叠统涅如组,物源区来自南部高喜马拉雅基底杂岩带。     

腐蚀管道在内压和轴向压力影响下的弯曲破坏

运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。     

From sequential to parallel growth of cities: Theory and evidence from Canada

This paper examines city growth patterns and the corresponding city size distribution evolution over long periods of time using a simple New Economic Geography(NEG) model and urban population data from Canada. The main findings are twofold. First, there is a transition from sequential to parallel growth of cities over long periods of time: city growth shows a sequential mode in the stage of rapid urbanization, i.e., the cities with the best development conditions will take the lead in growth, after which the cities with higher ranks will become the fastest-growing cities; in the late stage of urbanization, city growth converges according to Gibrat′s law, and exhibits a parallel growth pattern. Second, city size distribution is found to have persistent structural characteristics: the city system is self-organized into multiple discrete size groups; city growth shows club convergence characteristics, and the cities with similar development conditions eventually converge to a similar size. The results will not only enhance our understanding of urbanization process, but will also provide a timely and clear policy reference for promoting the healthy urbanization of developing countries.