工程勘察数据的传递控制与可视化

从广义说,工程勘察成果中的很大一部分是通过大量数据的传递与处理取得的。数据传递结构的优化和合理控制是提高勘察效率和质量的保证。讨论了用程序编制的方法实现的数据从平面图到剖面图的钻孔距离传递,利用模糊聚类思想提出的对剖面数据进行合并的建议和利用地质三维软件实现的三维地质体模型的耦合展示,这几个问题正是目前大多勘察单位在数据控制与传递流程中可能欠缺的环节。     

联合多种测高数据确定中国海及其邻域1．5′×1．5′重力异常

联合多种测高资料和Geosat/GM波形重构数据,基于EIGEN_CG01C重力场模型,采用沿轨迹加权最小二乘方法和逆Vening-Meinesz公式,确定了中国海及其邻域1.5′×1.5′重力异常。将计算结果与最新船测资料进行了比较,标准差为3.37×10-5m.s-2。     

基于边界反走样算法的地图可视化研究

在现有反走样算法的基础上提出了一种适合于地图可视化的边界反走样算法,并通过试验对该方法的反走样效果和效率进行了测试,在地图可视化中得到了较好的应用.     

空间索引与多尺度表达的一体化模型研究

在分析各种常用索引的基础上,依据各自的适用范围,提出了对点对象建立格网索引,对线、面对象建立改进四叉树索引的组合优化策略。设计的改进四叉树索引避免了传统四叉树的重复索引,提高了数据访问的效率。     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

苏北盆地泰州组砂岩成岩序列和储集层质量主控因素分析?

基于53口井310余块储集层砂岩样品的分析研究,指出泰州组储集层存在着压实(压溶)、胶结和溶蚀等成岩作用,但在不同位置成岩作用的表现有所不同。海安凹陷以胶结和溶蚀作用为主,压实与压溶作用不太明显;高邮凹陷的压实程度较海安凹陷强烈。压实作用使得高邮凹陷泰州组储集层孔隙度在2 400～2 800 m处于10%左右,而海安凹陷为10%～20%。海安凹陷和高邮凹陷泰州组储集层目前处于中成岩阶段A期。储集层质量主要受原始沉积环境和成岩作用的综合影响。压实作用和胶结作用均可降低孔隙,但当碳酸盐胶结物含量小于15％时,胶结作用对储集层质量影响较小。碳酸盐胶结物和长石颗粒溶蚀形成了大量的粒间溶孔。海安凹陷有利储集层主要分布在西北部和东部三角洲前缘砂体和滑塌浊积扇砂体中,高邮凹陷有利储集层主要分布在南部扇三角洲前缘砂体中。     

基于增强型GPS的自适应UKF实时星间相对定位方法

高精度的星间实时相对定位是卫星编队飞行的一项关键技术。本文以双星编队为例,提出一种基于GPS双频P码、双频载波相位以及星间距离观测信息的自适应UKF、实时相对定位方法。仿真结果表明:相比传统的EKF方法,该算法能有效地提高滤波稳定性及相对定位精度,而且,星间测距信息的引入能大大减少整周模糊度判定所需的历元数。     

Sedimentary characteristics of terrigenous debris at site MD05-2905 in the northeastern part of the South China Sea since 36 ka and evolution of the East Asian monsoon

Sediments with high sedimentation rate at site MD05-2905 in the Northeastern slope of the South China Sea provide unique materials for a high-resolution study on the paleoenvironment. Based on precise dating of AMS ¹⁴C, grain size analysis of terrigenous debris at core MD05-2905 was conducted after organic matter, biological carbonate and biogenic opal were removed. The results show that 15.5–63.5 μm coarse grain size ingredients may indicate East Asian winter monsoon changes and that 2–9 μm fine grain size ingredients may be used as a proxy of evolution of the East Asian summer monsoon. The results of grain size analysis, which suggest East Asian monsoon intensity, reveal that a winter monsoon dominated the glacial regime and a summer monsoon dominated the Holocene regime. It was also shown that the summer monsoon increased gradually, experienced several abrupt changes and reached a culmination in the early Holocene (11200–8500 a B.P.) since 36 ka. Controlled by precession periodicity, it may be related with the amount of solar radiation at the highest stage, which needs further study. __________ Translated from Advances in Earth Science, 2007, 22(10): 1012–1018 [译自: 地球科学进展]     

盘南响水矿井船形构造特征及其对煤层开采的影响

盘南响水井田播土采区内北西向断层成组出现,倾向相对,地面大致平行或呈透镜状延伸,深部相交消失,空间形态组合类似船体形状。通过对船形构造内的断层组合及成因分析,认为该船形构造属挽近地质历史时期形成的重力滑动构造,其两侧利用和追踪了先期形成的北西向断层,主滑面主要沿煤系地层中部的17、19煤层等软弱层发育。根据船形构造发育特点,分析了各个船形构造对煤系地层及煤层的切割破坏程度,为矿井生产中的构造预测提供了依据。     

菲降解菌的降解特性及酶促反应动力学研究

通过对取自MBR膜生物反应器中的活性污泥加入菲进行富集培养、驯化,分离、纯化出一株能以菲为唯一碳源和能源的短杆状革兰氏阴性菌J-1,细菌长2～5μm,宽1～3μm;研究了初始底物浓度、温度、pH对菌株J-1降解菲的影响,探讨了菌株J-1胞内酶对菲降解的底物抑制动力学。试验表明:菌株J-1在48h内能将不同浓度菲的水溶液中的菲完全降解;菲浓度增加,达到完全降解的时间延长。温度对细菌的降解能力影响较大,菌株J-1对菲降解的最佳温度为28℃。1.15mg·L-1的菲,28℃时48h内能完全降解,而相同时间内10℃时的降解率仅为36.65%。菌株J-1对pH的波动具有一定的适应性,pH在一定范围内(6.0～8.4)变化对菲降解的影响不大,降解反应的最佳pH为7.2。菌株J-1对菲的降解符合一级动力学反应方程。较高的底物浓度对酶促降解反应具有抑制作用,酶促反应的最大速率常数vm=1.17mg·L-1·h-1,米氏常数Km=61.70mg·L-1;底物抑制常数kS=49.60mg·L-1;最佳底物浓度[S]opt=55.32mg·L-1。