Occurrence and conceptual sedimentary model of Cambrian gypsum-bearing evaporites in the Sichuan Basin,SW China

During the Cambrian, gypsum-bearing evaporites formed in the Sichuan Basin, SW China. These rocks are important for oil and gas sealing, but details of their distribution and origin are not well established. This study examines the regional distribution and origin of the gypsum-bearing evaporites using a comprehensive analysis of drilling data from 34 wells, 5 measured cross-sections in the basin and surrounding area, and 96 maps of area-survey data. Results show that in the stratigraphic succession, the gypsum-bearing evaporites occur mainly in the Lower Cambrian Longwangmiao Formation, the Middle Cambrian Douposi Formation, and the Middle-Upper Cambrian Xixiangchi Group. Geographically, the rocks are found mainly in the southeastern part of the basin, and the distribution of deposits shows an overall SW-NE trend. The sedimentary environments for evaporite formation were evaporative lagoon and inter-platform basin in a platform setting. Gypsum was generated by the underwater concentration of sea water in a strongly evaporative environment. Both an evaporative restricted platform and a mixeddeposition restricted platform model appear to be applicable to the development of gypsum in the Sichuan Basin. The gypsum-bearing evaporites with the best sealing capacity are located mostly in the southeastern part of the basin. These constraints can be applied directly to regional exploration, and have implications for the regional paleogeography and paleoclimate.     

Experimental Study of the SiO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O–KF–KCl–NaF System at 700–800°C and 1–2 kbar Based on Synthetic Fluid Inclusions in Quartz

The phase state of the fluid in the H₂O–KF ± KCl ± NaF system is studied in the presence of quartz for an experimental assay of the mutual influence of various salts of the fluid-forming mixture on heterogeneous fluid equilibria. The fluid inclusions were synthesized in quartz by the fracture healing method from solutions with KF + KCl and KF + NaF mixtures at 1 or 2 kbar and 700, 750, or 800°C. The results of the fluid inclusion study indicate a heterogeneous state of the fluid and variation in the fluid composition during experiments as a result of its interaction with quartz. The increase in temperature and pressure, as well as variation in the proportions of the salt contents in the fluid-forming mixture, changed the course of chemical reactions. After all the experiments, a glassy phase was observed in some types of inclusions. It is known that aqueous KF or KCl solutions, the solubility of which increases during heating, are characterized by phase equilibria of systems of the first type (Valyashko, 1990), when liquid and vapor are equilibrated for a heterogeneous state of the fluid. In this case, some inclusions should homogenize to vapor. However, no similar inclusions were observed in contrast to denser fluid phases (liquids), which are typical of the upper heterogeneous area of systems of the second (P–Q) type. Some inclusions host solid phases, the solubility of which decreases as the temperature increases. The results of experiments in the presence of KF + NaF solutions showed that the amount of inclusions of heterogeneous entrapment increases at higher temperatures simultaneously with a decrease in the H₂O content of the glassy phase.     

The oldest (~ 1.9 Ga) metadolerites of the southern Siberian craton: age,petrogenesis, and tectonic setting

Geological, geochronological, and isotope-geochemical studies of the metadolerites of the Angaul complex, widespread in the Urik-Iya graben of the southern Siberian craton, were carried out. The metadolerites forming separate conformal bodies (sills) among the metasandstones of the Ingash Formation were studied in detail. U-Pb zircon (SHRIMP) dating of metadolerites yielded an age of 1913 ± 24 Ma, and U-Pb baddeleyite (ID-TIMS) dating of these rocks yielded an age of 1914.0 ± 1.7 Ma. Thus, the date of 1914 ± 2 Ma can be taken as the most precise age estimate for the studied rocks. The metadolerites of the Angaul complex correspond in chemical composition to the normal-alkaline tholeiitic basalts. Metadolerites are differentiated rocks with mg# of 36 to 58. They show fractionated REE patterns: (La/Yb)_n = 1.2-3.5. All metadolerites, independently of their mg# value, have low contents of Nb (1.6-10.2 ppm) and show well-pronounced negative Nb-Ta anomalies in multielement patterns (Nb/Nb* = 0.19-0.54). The metadolerites are characterized by positive ε_Nd(T) values ranging from 0.4 to 5.2, which correlate well with their SiO₂ content and mg# value. The isotope-geochemical parameters of the metadolerites of the Angaul complex indicate that fractional crystallization, along with the assimilation of the host rocks (AFC), might have been the main process during the formation of the most differentiated metadolerites. The geochemical characteristics of metadolerites with the maximum mg# values of 57-58 and ε_Nd(T) = 5.2 suggest that the parental mantle source of the metadolerites resulted from mixing of predominant depleted mantle material with the subcontinental-lithosphere material. Intrusion of the dolerites of the Angaul complex, as well as the deposition of the sedimentary strata of the Ingash Group, took place at the Paleoproterozoic stage of intracontinental extension caused by the collapse of the orogen resulted from the collision of the Biryusa block with the Tunguska superterrane in the southern Siberian craton.     

Seasonal variability of oxygen and hydrogen isotopes in a wetland system of the Yunnan-Guizhou Plateau,southwest China: a quantitative assessment of groundwater inflow fluxes

The Caohai Wetland serves as an important ecosystem on the Yunnan–Guizhou Plateau and as a nationally important nature reserve for migratory birds in China. In this study, surface water, groundwater and wetland water were collected for the measurement of environmental isotopes to reveal the seasonal variability of oxygen and hydrogen isotopes (δ¹⁸O, δD), sources of water, and groundwater inflow fluxes. Results showed that surface water and groundwater are of meteoric origin. The isotopes in samples of wetland water were well mixed vertically in seasons of both high-flow (September) and low-flow (April); however, marked seasonal and spatial variations were observed. During the high-flow season, the isotopic composition in surface wetland water varied from ?97.13 to ?41.73‰ for δD and from ?13.17 to ?4.70‰ for δ¹⁸O. The composition of stable isotopes in the eastern region of this wetland was lower than in the western region. These may have been influenced by uneven evaporation caused by the distribution of aquatic vegetation. During the low-flow season, δD and δ¹⁸O in the more open water with dead aquatic vegetation ranged from ?37.11 to ?11.77‰, and from ?4.25 to ?0.08‰, respectively. This may result from high evaporation rates in this season with the lowest atmospheric humidity. Groundwater fluxes were calculated by mass transfer and isotope mass balance approaches, suggesting that the water sources of the Caohai Wetland were mainly from groundwater in the high-flow season, while the groundwater has a smaller contribution to wetland water during the low-flow season.     

Anaerobic digestion of residual liquid effluent (brown juice) from a green biorefinery

This work studied the anaerobic digestion of brown juice, a liquid residual stream generated from biomass fractionation in a green biorefinery. Biomethane potential batch tests and inhibition studies of brown juice were performed during continuous processing in an upflow anaerobic sludge blanket reactor. Prolongation of the lag phase in the batch tests with increasing substrate/inoculum ratio suggested initial inhibition, which was, however, overcome by adaptation. This was indicated by high final methane yields, which were close to the theoretical maximum of up to 500 L-CH₄ kg-VS^?1, achieved after 15 days for most of the set-ups. Reactor operation at the organic loading rate of 13.9 g-COD L^?1 day^?1 and hydraulic retention time of 3 days revealed methane yields of 202 L-CH₄ kg-COD^?1 (307 L-CH₄ kg-VS^?1). Particle size analysis of the granules used in the reactor showed disintegration of the larger granules.     

Photodegradation of dimethyl phthalate (DMP) by UV–TiO<Subscript>2</Subscript> in aqueous solution: operational parameters and kinetic analysis

In this paper, the adsorption and degradation phenomenon involved in the photocatalytic degradation of dimethyl phthalates (DMPs) by titanium dioxide (TiO₂) was studied. A variety of operating variables were selected firstly. Then, it was proved that even for such weak adsorption properties molecules as DMP, adsorption was still an important prerequisite for photolysis. A surface-mediated reaction process was proposed that the photodegradation of DMP assisted by TiO₂ particles occurred primarily at the surface of the photocatalyst rather than in the homogeneous phase. According to Langmuir–Hinshelwood model, the adsorption constant determined from the dark adsorption was far less than that obtained in the light condition. Enhanced DMP adsorption on the surface of TiO₂ under irradiation was the possible reason for the improvement of photodegradation efficiency. Under the irradiation of light, a synergistic mechanism of adsorption and photocatalysis was responsible for DMP degradation. The quantitative analysis by adding scavengers indicated that ^·OH radical was primarily responsible for the photodegradation of DMP. It was further verified that ^·OH was produced much more from conduction band electrons rather than valance band holes toward photodegradation of DMP by adding foreign Cu²⁺.     

Application of magnetic adsorbent with silicate and phenyl polymers to adsorb Rhodamine B

The extensive use of Rhodamine B (RhB) for textile, paper, pigment, food, cosmetic, and drug manufacturing and its indiscriminate disposal leads to serious human, biological, and environmental hazards. A magnetic adsorbent with silicate and phenyl polymers (Ph/SiO₂/Fe₃O₄) has been prepared to absorb RhB. The morphology and structure of the adsorbents have been characterized by TGA, XRD, FTIR, and adsorption–desorption measurement. The results revealed that Ph/SiO₂/Fe₃O₄ exhibited a paramagnetic behavior and could easily and quickly be separated from a suspension. The RhB adsorption behavior was almost pH independent due to the adsorption between the phenyl ring of Ph/SiO₂/Fe₃O₄ and RhB by π–π electron-donor–acceptor interactions. The adsorption behavior of RhB adsorption was in good agreement with the Langmuir adsorption isotherm, and the maximum adsorption capacity was 142.186 mg g^?1. Good desorption performance of Ph/SiO₂/Fe₃O₄ showed that this novel magnetic adsorbent cannot only be activated by ethanol extraction process but also reuse by the recovery of magnetic force.     

A simple approach to evaluating leakage through thin impervious element of high embankment dams

Internal erosion is the most common reason which induces failure of embankment dams besides overtopping. Relatively large leakage is frequently concentrated at defects of impervious element, and this will lead to eventual failure. The amount of leakage depends not only on integrity of impervious element, but also on dam height, shape of valley, shape of impervious element and water level in reservoir. The integrity of impervious element, which represents the relative level of seepage safety, is not easy to be determined quantitatively. A simple method for generalization of steady seepage state of embankment dams with thin impervious element is proposed in this paper. The apparent overall value of permeability coefficient for impervious element can be obtained by this method with reasonable accuracy and efficiency. A defect parameter of impervious element is defined as an index to characterize seepage safety of embankment dams. It equals the ratio of the apparent overall value of permeability coefficient to the measured value in laboratory for intact materials. Subsequently, seepage safety of three dams is evaluated and the evolution of defect level of impervious element of dams is investigated. It is proved that the newly proposed method in this paper is feasible in the evaluation of relative seepage safety level of embankment dams with thin impervious element.     

Spatial and temporal variations of suspended solid concentrations from 2000 to 2013 in Poyang Lake,China

Concentrations of suspended solids in lakes can affect the latter’s primary productivity and reflect changes in sediment deposition. Determining the temporal and spatial distribution of suspended solid concentrations has important significance in lake water environmental management; this is particularly urgent for Poyang Lake, the largest freshwater lake in China. In this study, suspended solid concentration inversion models for Poyang Lake were created using a semi-empirical method with regression analysis between continuously measured suspended solid concentration data and multi-band moderate-resolution imaging spectroradiometer images for spring, summer, autumn, and winter from 2009 to 2012. The coefficient of determination (R²) is from 0.6 to 0.9 and the average relative error for the accuracy verification was between 10 and 30%. The seasonal distributions of suspended solid concentrations in Poyang Lake from 2000 to 2013 were then obtained using optimal reversal models. The results showed that the seasonal variation in suspended solid concentrations had a “W” shape in which high spring and autumn and low summer and winter values. The suspended solid concentrations increased annually from 2000 to 2013 and were mainly distributed in the northern and central portions of the lake, with lower values along the shorelines. Further analysis indicated that the large difference in water level between the wet and dry seasons is an important factor in explaining these seasonal variations. Moreover, the suspended solid concentrations were poorly correlated with water temperature and chlorophyll-a concentration but more highly correlated with the deferred chlorophyll-a concentration.