Experimental research on a new encapsulated heat-generating hydraulic fracturing fluid system

1 IntroductionFracturing plays an important role in increasingthe production and injection and enhancing the final re-covery of oil and gas. At present, the use of ahydroxypropyl guar gum, borate-crosslinked, hydraulicfracturing fluid systemhas become ext…     

Photosynthetic characteristics of dominant tree species and canopy in the broadleaved Korean pine forest of Changbai Mountains

Based on the light-photosynthesis response measurement at leaf level, combined with over-and under-canopy eddy covariance measurements, research on photosynthetic characteristics of single trees and forest canopy was conducted. The relationship between light intensity and photosynthetic rates for leaves and canopy can be well fitted by a non-rectangular hyperbola model. Mongolian oak presented a high light compensation point, L _cp (28 μmol·m^?2·s^?1), a light saturation point L _sp (>1800 μmol·m^?2·s^?1), and a maximal net photosynthetic rate P _max (9.96 μmol·m^?2·s^?1), which suggest that it is a typical heliophilous plant. Mono maple presented the highest apparent quantum efficiency α (0.066) but the lowest, L _cp (16 μmol·m^?2·s^?1), L _sp (≈800 μmol·m^?2·s^?1), and P _max (4.51 μmol·m^?2·s^?1), which suggest that it is heliophilous plant. Korean pine showed the lowest α value but a higher P _max, which suggest that it is a semi-heliophilous plant. At the canopy level, the values of both α and P _max approached the upper limit of reported values in temperate forests, while L _cp was within the lower limit. Canopy photosynthetic characteristics were well consistent with those of leaves. Both showed a high ability to photosynthesize. However, environmental stresses, especially high vapor pressure deficits, could significantly reduce the photosynthetic ability of leaves and canopy.     

鄱阳盆地构造—沉积特征及其演化史

 鄱阳盆地是发育在江南—九岭和怀玉—官帽基底拆离造山带上的白垩-古近纪张扭性断陷盆地,明显受近南北走向的赣江走滑断裂系和前白垩系逆冲断裂系晚期反转的双重因素控制,呈“两坳夹一隆”的区域构造格局。受赣江、进贤—石门街走滑断裂夹持的南昌凹陷,呈近南北向凹凸相间展布格局。进贤—石门街走滑断裂以东地区,“南断北超”型断陷自南而北由北东走向渐转为北北东向展布,其源于晚印支-燕山期北东向逆冲断裂在晚期的反转作用,西缘和北部受赣江断裂系东枝走滑断裂影响明显而发生转向。鄱阳盆地经历了早白垩世晚期(冷水坞组沉积期)拉分盆地、晚白垩世早-中期(周家店组—南雄组沉积早期)走滑张扭断(坳)陷盆地、晚白垩世晚期(南雄组沉积中-晚期)走滑伸展盆地和古近纪坳陷盆地等演化阶段,东南部断陷区(江埠—二甲村凹陷)由于喜马拉雅期的隆升剥蚀而只残存周家店组早期坳陷和周家店组中期—南雄组中期断陷两个发育阶段的沉积。     

天然水体中酚的降解动力学

本文报道了天然水体中低浓度酚的降解动力学;计算了它的降解速率常数、降解活化能等。降解半表期是t_(1/2)=1.5d~(-1)(10℃),t_(1/2)=O.74d~(-1)(30℃)。低浓度酚的降解动力学跟天然水体中酚的降解情况比较接近。本文的结果对环境评价、蓄水库工程设计等很有参考价值。     

采用非线性决策树的学生课堂教学满意度研究

学生反馈是评估高等院校课堂教学质量的重要指标。目前,对学生反馈的问卷仅进行主观理解和简单统计,无法提供准确定量的分析和支持依据。使用非线性决策树,对近3年本科必修双语课程《数字图像处理》的学生评教问卷进行数据挖掘,首先将其分成3类和10个不同输入,然后通过数据预处理、模型选择和建模,最后构建树状模型对其进行分析。分析结果符合对于该课程学生反应和争议较大的问题预期,为课程设计提供定量有效的教学分析工具。     

南黄海海相油气勘探前景探讨与问题分析

南黄海海域的中、古生代海相油气前景广阔,是重要的油气战略接替基地。由于多期构造运动的改造作用,原型盆地遭受强烈破坏,地质构造复杂,地球物理勘探精度低,造成对地层与构造认识不清,油气分布规律不明。针对勘探中面临的主要问题,提出的主要对策是：重点开展地球物理勘探技术创新研究与攻关试验工作,提高方法技术的适用性与有效性;在大地构造理论的指导下,重点开展多期构造活动背景下有效烃源岩、储层、保存条件等因素的研究工作,对区域油气地质条件优越且地层、岩性等特征存在争议的局部构造实施科学钻探等。     

EGM96和EGM2008地球重力场模型计算弹道扰动引力的比较

给出了利用地球重力场模型计算扰动引力以及重力场模型截断误差的公式,计算了36阶、360阶、2 160阶地球重力场模型在径向和水平方向的截断误差,并对36阶、360阶的EGM96和EGM2008重力场模型计算的弹道扰动引力矢量进行了分析和比较.结果表明,采用重力场模型计算扰动引力时,模型阶数和弹道点的高度越低,模型截断误差越大;EGM96和EGM2008模型的一致性随着模型阶数的升高而逐渐降低.总体来看,EGM2008模型的精度要好于EGM96模型.     

近40年河北省地表干燥度的时空变化

利用河北省1970-2007年48个气象台站逐日资料, 采用Penman-Monteith模型计算潜在蒸散量, 由潜在蒸散量和降水量之比构建干燥度指数, 并采用Kriging插值法进行空间插值以分析其区域特征。结果表明:1970-1985年, 由于降水量减少和潜在蒸散量减少, 蒸散量的减少速率大于降水量的减少速率, 地表干燥度指数呈下降趋势, 潜在蒸散量的显著减少是地表干燥度下降的主要原因, 而风速和日照时数的显著降低决定了潜在蒸散量的显著下降; 1986-2007年, 由于年平均气温的显著升高, 潜在蒸散量增加, 使得地表干燥度略呈上升趋势。河北省地表干燥度高值区分布在张家口地区的桑洋盆地和坝西高原, 而低值区主要在燕山南麓低山丘陵地区的承德西南部、唐山的北部和秦皇岛中北部大部分地区。干燥度减少区域主要集中在河北省东北部至河北省西部的带状区域。     

旋转大气中运动的多时态特征和时间边界层

一、引言 众所周知,旋转大气中的运动,存在两个在时间尺度和动力学特征上都有明显差别的过程,即适应过程和发展过程。最近,叶笃正、李麦村等进一步指出:在发展过程中,大气运动还具有迅速变化和缓慢变化的两个阶段,对于这种发展过程中的双时态特征,巢纪平从物理上作了进一步的解释。因此,联合适应过程与发展过程,运动至少存在三个时态,事实上,这种多时态特征是旋转流体中运动的一种固有现象,在本文中,我们将对此作进一步的分析与讨论。     

Study on a new shear wall system with shaking table test and finite element analysis

A new seismic energy dissipation shear wall structure is proposed in this paper. The new shear wall is one with purposely built‐in vertical slits within the wall panel, and rubber belts as seismic energy dissipation devices are installed in the vertical slits. In order to verify this concept, shaking table tests of a 10‐storey shear wall model with rubber belts filled in the vertical slits were carried out, and comparison of seismic behaviour was made between the new shear wall system and a shear wall with reinforced concrete connecting beams as energy dissipation. Furthermore, the seismic behaviour of this new shear wall is analysed by a finite element time history analysis method. The test and analysis show that the new shear wall system has a very good ability to dissipate seismic energy and is easy to use in engineering practice. Copyright © 2000 John Wiley & Sons, Ltd.