Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Abstract

This study developed prestressed high-strength concrete (PHC) piles reinforced with high-strength materials (glass fiber-reinforced polymer (GFRP) bars) for flexural performance enhancement. Flexural strengths and behaviors of PHC piles reinforced with hybrid GFRP and steel bars were experimentally investigated, respectively. Large-scale specimens with total lengths of 12,000?mm and diameters of 600?mm were constructed and tested under bending, accompanied by evaluation of effects of non-prestressed reinforcement type and longitudinal reinforcement ratio. J-factors were calculated to evaluate deformability of all the specimens. PHC piles reinforced with GFRP bars were demonstrated to have much higher flexural capacity than those reinforced with steel bars. Moreover, strains at the midspans of cross sections of all the specimens basically conformed to the assumption of plane section. Failure of PHC piles reinforced with GFRP bars was attributable to gradual concrete crushing, while that of PHC piles reinforced with steel bars resulted from steel yielding. Results of this study were expected to provide theoretical basis for wide engineering applications of PHC piles reinforced with hybrid GFRP bars and steel bars in marine structures.     

Application of flocculation combined with vacuum preloading to reduce river-dredged sludge

Abstract

To achieve the rapid dewatering of dredged sludge, the flocculation–vacuum-preloading method was tested indoors. In this study, the optimal mixing ratio of six flocculants was determined through the settling column test, and then the proposed method was tested. The water drainage and settlement were monitored during the test, while the soil moisture content and shear strength were measured after the test. The results show that all the flocculants had an optimal mixing ratio, and the addition of 0.8% FeCl₃ or 0.08% anionic polyacrylamide (APAM) in the sludge can better accelerate solid–liquid separation of the sludge. After the test, the water content in the sludge decreased from 140% to 60%. Compared with general vacuum preloading, the use of the proposed method increased the water drainage by 46.5% and 56.8% and decreased the soil volumes by 60.5% and 82.4% for FeCl₃ and APAM, respectively. Moreover, the corresponding shear strength was increased from 10 to 14 and 17?kPa. In addition, the use of APAM increased the solidification rate of heavy metals in the sludge to more than 80%, effectively inhibiting the migration of heavy metals.     

降雨量、土壤蓄水量对流动沙地土壤水分深层渗漏的影响

土壤水分深层渗漏是陆地近地层水分循环的重要环节。利用土壤水分深层渗漏记录仪对毛乌素沙地典型流动沙丘不同深度土层的土壤渗漏水量连续进行两年定点监测。结果表明：（1）2016年生长季（4月1日至10月31日）降水量为2017年的1.93倍,但50、100、200 cm沙层的渗漏水量分别是2017年同期的4.53、5.53,5.22倍。同时,渗漏水量与降雨量及土壤蓄水量的波峰较一致。（2）强降雨对深层渗漏水量的影响较大,土壤蓄水量的变化也与深层渗漏水量密切相关;降雨量较小时,土壤蓄水量与深层渗漏水量之间的关系更为密切。在连续降雨过程中,越往深处,渗漏的产生通常是多次降雨过程累积的结果,将土壤蓄水量作为中间变量,能更好地分析土壤深层渗漏过程。（3）当天蓄水量与次日渗漏水量的相关系数较高,土层越深,深层渗漏水量与土壤蓄水量的相关系数增加,二者之间的线性拟合的R²也相应增加。     

Salinivibrio sp.YH4胞外丝氨酸蛋白酶EYHS耐盐性及生物信息学分析

摘要：目的 探讨菌株Salinivibrio sp.YH4分泌的丝氨酸蛋白酶EYHS的耐盐性及结构特征。方法 明胶底物酶谱法分析EYHS的耐盐性。应用生物信息学手段对EYHS及6种耐盐的S8家族丝氨酸蛋白酶结构特征进行分析。结果 EYHS在4 mol/L的NaCl溶液中仍具有活性,属于耐盐蛋白酶。EYHS及6种S8家族丝氨酸蛋白酶分子表面的loop区等无规则卷曲所占比例较高,α-螺旋与β-片层则主要位于酶分子内部。EYHS分子表面酸性氨基酸含量较高,且具有弱疏水内核。多序列比对发现蛋白酶的催化三联体两侧存在高度保守的基序和保守的极性氨基酸及芳香族氨基酸,并存在多个保守的Gly与Ala。同源模建和表面电荷分布显示,α螺旋和β片层围成了蛋白酶的催化腔,EYHS活性中心包含由Asp32、His65与Ser215组成的催化三联体,且催化位点区域表面静电势为负。结论 上述结构特征可能有助于耐盐丝氨酸蛋白酶EYHS在高盐环境下维持其稳定性和适度柔性,并有助于其催化功能的发挥,为深入研究耐盐丝氨酸蛋白酶的高盐环境适应性提供了一定的理论依据。     

Multiple Unmanned Underwater Vehicles Consensus Control with Unmeasurable Velocity Information and Environmental Disturbances Under Switching Directed Topologies

China Ocean Engineering - A consensus algorithm proposed in the paper is applied to tackle remarkable problems of unmeasurable velocities, the environmental disturbances, and the limited...     

耀变体在射电波段的偏振研究

利用UMRAO数据库22个耀变体源的偏振数据,根据Lazarian&Pogosyan理论模型分析研究了耀变体射电波段的偏振随波长的变化,得出不同类的耀变体偏振随波长变化的原因。结果表明,与Lazarian&Pogosyan理论模型吻合较好。由此得出如下结论:(1)反常去偏振耀变体源中反常法拉第旋光起主导作用,反常去偏振相对较少;(2)热辐射与同步辐射混合作用,高频波段的偏振度小于低频波段的偏振度(反常去偏振);(3)当被观测波段波长小于吸积盘热辐射对应的维恩波长时,高频波段的偏振度大于低频波段的偏振度(常规去偏振)。     

基于电化学法的铬盐清洁生产工艺研究

现有铬盐生产技术阻碍了铬盐行业的清洁化发展,研发新型铬盐生产技术实属必要。中国科学院青海盐湖研究所自行研发出一套以电化学法为基础的铬盐清洁生产工艺,涵盖三条大工艺和四种母系铬盐产品。包括氢氧化钠溶液中电化学氧化铬铁制备铬酸钠联产三氧化二铬和三氧化二铁工艺,离子膜电解法从铬酸钠合成重铬酸钠工艺,以及离子膜电解法从重铬酸钠合成铬酸酐工艺。相比现有铬盐生产技术,该技术的优势主要体现在以下五点:温和化、去渣化、高值化、自动化和高效化。目前相关研发工作业已走出实验室,走过产业化中间试验,正向产业化示范线迈进。     

浅论县（市）级土地利用数据库系统建设

随着经济的迅猛发展,各地土地利用情况多种多样,采用手工管理土地资料更新周期长,综合利用率低,各种查询统计要耗费大量的人力物力,而且统计计算的数据结果精度不高。因此仅仅依靠传统的手工管理模式已经远远不能满足土地管理工作的需要,为保质保量按时完成全国土地利用现状更新调查,加强地籍规范化管理,利用成熟的计算机技术辅助进行土地调查已势在必行。     

EGM96和EGM2008地球重力场模型计算弹道扰动引力的比较

给出了利用地球重力场模型计算扰动引力以及重力场模型截断误差的公式,计算了36阶、360阶、2 160阶地球重力场模型在径向和水平方向的截断误差,并对36阶、360阶的EGM96和EGM2008重力场模型计算的弹道扰动引力矢量进行了分析和比较.结果表明,采用重力场模型计算扰动引力时,模型阶数和弹道点的高度越低,模型截断误差越大;EGM96和EGM2008模型的一致性随着模型阶数的升高而逐渐降低.总体来看,EGM2008模型的精度要好于EGM96模型.     

Environmental impact of fluidized solidified silt casting on surrounding water bodies

Abstract

With the growing demand for underwater refill engineering, the construction technology of implementing fluidized solidification in underwater pouring has recently received increased attention. However, the environmental impact of underwater casting on surrounding water bodies, especially when the silt is polluted, is still unclear. In this study, a simulated underwater pouring test and a static immersion release test were conducted separately to study the quality of the surrounding water during and after pouring. The results showed that fluidized-solidified silt casting could increase the pH of the surrounding water, even after the pouring had stopped, by approximately 1.0 and the turbidity could reach 200 NTU. No diffusion of Zn and Cu into the surrounding water was observed and while Ni and Cr exhibited slight diffusion, this was at a level well below international water quality standard. During construction, reducing the distance from the seafloor to the bottom of the pouring catheter could reduce the level of pollution. After construction, the use of neutral solidified materials can effectively reduce the pH of the surrounding water and the potential risk of heavy metal dissolution.