Cracking Processes in Rock-Like Material Containing a Single Flaw Under Uniaxial Compression: A Numerical Study Based on Parallel Bonded-Particle Model Approach

Cracking processes have been extensively studied in brittle rock and rock-like materials. Due to the experimental limitations and the complexity of rock texture, details of the cracking processes could not always be observed and assessed comprehensively. To contribute to this field of research, a numerical approach based on the particle element model was used in present study. It would give us insights into what is happening to crack initiation, propagation and coalescence. Parallel bond model, a type of bonded-particle model, was used to numerically simulate the cracking process in rock-like material containing a single flaw under uniaxial vertical compression. The single flaw’s inclinations varied from 0° to 75° measured from the horizontal. As the uniaxial compression load was increased, multiple new microcracks initiated in the rock, which later propagated and eventually coalesced into longer macrocracks. The inclination of the pre-existing flaw was found to have a strong influence on the crack initiation and propagation patterns. The simulations replicated most of the phenomena observed in the physical experiments, such as the type, the initiation location and the initiate angle of the first cracks, as well as the development of hair-line cracks, which later evolved to macrocracks. Analyses of the parallel bond forces and displacement fields revealed some important mechanisms of the cracking processes. The first cracks typically initiated from the tensile stress concentration regions, in which the tensile stress was partially released after their initiation. The tensile stress concentration regions subsequently shifted outwards close to the propagating tips of the first cracks. The initiation and propagation of the first cracks would not significantly influence the compressive stress singularity at the flaw tips, which was the driving force of the initiation of secondary cracks. The initiation of microcracking zone consisting almost exclusively of micro-tensile cracks, and that of microcracking zone consisting of micro-tensile cracks and mixed micro-tensile and shear cracks, were found to be correlated with two distinct types of displacement fields, namely type I (DF_I) and type II (DF_II), respectively.     

Surface-bounded atmosphere of Europa

A 1-D collisional Monte Carlo model of Europa's atmosphere is described in which the sublimation and sputtering sources of H₂O molecules and their molecular fragments are accounted for as well as the radiolytically produced O₂. Dissociation and ionization of H₂O and O₂ by magnetospheric electron, solar UV-photon and photo-electron impact, and collisional ejection from the atmosphere by the low-energy plasma are taken into account. Reactions with the surface are discussed, but only adsorption and atomic oxygen recombination are included in this model. The size of the surface-bounded oxygen atmosphere of Europa is primarily determined by a balance between atmospheric sources from irradiation of the satellite's icy surface by the high-energy magnetospheric charged particles and atmospheric losses from collisional ejection by the low-energy plasma, photo- and electron-impact dissociation, and ionization and pick-up from the surface-bounded atmosphere. A range of sources rates for O₂ to H₂O are used with a larger oxygen-to-water ratio than suggested by laboratory measurements in order to account for differences in adsorption onto grains in the regolith. These calculations show that the atmospheric composition is determined by both the water and oxygen photochemistry in the near-surface region, escape of suprathermal oxygen and water into the jovian system, and the exchange of radiolytic water products with the porous regolith. For the electron impact ionization rates used, pick-up ionization is the dominant oxygen loss process, whereas photo-dissociation and atmospheric sputtering are the dominant sources of neutral oxygen for Europa's neutral torus. Including desorption and loss of water enhances the supply of oxygen species to the neutral torus, but hydrogen produced by radiolysis is the dominant source of neutrals for Europa's torus in these models.     

Wetland economic valuation approaches and prospects in China

Ecosystem services valuation seeks to increase the social relevance of ecosystem characteristics, the underlying biological mechanisms that support services, by making the contribution of ecosystems to human well-being explicit. Economic valuation can help management by clarifying the full range of benefits and costs of proposed management actions. In the past two decades, economic valuation of wetland ecosystem services has become one of the most significant scientific priorities for wetland protection. In this paper, we provide an overview of ecosystem services, and summarize the main interdisciplinary approaches to measure and value wetland ecosystem services. We identified four main methodological gaps preventing progress on wetland valuation of ecosystem services in China, which are: 1) confusion on terminology like intermediate and final ecosystem services, 2) lack of ecological production functions to link ecosystem characteristics to final ecosystem services, 3) static valuation making it difficult to evaluate the trade-offs and synergies among ecosystem services, and 4) lack of clear guidance on relating ecological compensation programs to conservation targets. Overcoming these gaps is important to inform wetland compensation mechanisms and conservation policies. We propose future research on wetland ecosystem services in China should be focused on: 1) defining final ecosystem services based on beneficiary preferences and underlying biophysical mechanisms, 2) establishing wetland monitoring programs at specific sites to collect data on final ecosystem service indicators and ecosystem characteristic metrics to create ecological production functions for economic valuation and rescaling techniques, and 3) incorporating wetland ecosystem service values into decision-making processes to inform wetland management.     

The inversion of anelastic coefficient,source parameters and site respond using genetic algorithm

It gradually becomes a common work using large seismic wave data to obtain source parameters, such as seismic moment, break radius, stress drop, with completingof digital seismic network in China (Hough, et al, 1999; Bindi, et al, 2001). These parameters are useful on earthquake prediction and seismic hazard analysis.Although the computation methods of source parameters are simple in principle and the many research works have been done, it is not easy to obtain the parameters accurately. There are two factors affecting the stability of computation results. The first one is the effect of spread path and site respond on signal. According to the research results, there are different geometrical spreading coefficients on different epicenter distance. The better method is to introduce trilinear geometrical spreading model (Atkinson, Mereu, 1992; Atkinson, Boore, 1995; WONG, et al, 2002). In addition, traditional site respond is estimated by comparing with rock station, such as linear inversion method (Andrews, 1982), but the comparative estimation will introduce some errors when selecting different stations. Some recent research results show that site respond is not flat for rock station (Moya, et al, 2000; ZHANG,. et al, 2001; JIN, et al, 2000; Dutta, et al, 2001). The second factor is to obtain low-frequency level and corner frequency fromdisplacement spectrum. Because the source spectrum model is nonlinear function,these values are obtained by eye. The subjectivity is strong. The small change of corner frequency will affect significantly the result of stress drop.     

PHYSICAL GEOGRAPHY IN SOUTHEAST ASIA: PAST THEMES, CURRENT STATUS AND FUTURE TRENDS

Our knowledge regarding the physical geography of Southeast Asia is incomplete to a surprising extent. This paper reviews the past research, describes the ongoing work, and attempts to identify the future trends. Coverage of such a large area, even for the last 25 years, requires study of publications in several languages and coping with literature which is not easily available. Therefore certain topics. which are prominent in current research and likely to remain so in the future were chosen and reviewed in detail. Such topics include studies related to active plate margin features; the Pleistocene in Southeast Asia; erosion and sedimentation rates; rainforest; river systems; karst in Southeast Asia; coastal geomorphology; and the urban environment. Environmental studies are rapidly gaining importance chiefly because of (a) the destruction of the natural vegetation and the associated loss of biodiversity and (b) the growing problems due to accelerated erosion and sedimentation This trend is likely to continue with accelerated destruction of forests, development of coastal areas, and urbanization of the landscape The direction of research in physical geography of Southeast Asia has been determined by a combination of individual research interest, governmental priorities, and international expectations     

Health impact assessment of marine emissions in Pearl River Delta region

Global marine vessels emissions are adversely affecting human health particularly in southeast Asia. But health burdens from both ocean- and river-going vessels in Pearl River Delta (PRD) regions are not quantified. We estimated the potential health impacts using pooled relative risks of mortality and hospital admissions in China, and the model derived concentrations of sulfur dioxide (SO₂), particulate matter (PM₁₀), nitrogen dioxide (NO₂) and ozone (O₃) due to vessels emissions. SO₂ concentrations due to marine emissions in Hong Kong were 13.6 μgm^?3 compared with 0.7 μgm^?3 in PRD regions that were far from the marine vessels. In PRD regions, the estimated annual numbers (per million people) of excess deaths from all natural causes and hospital admissions from cardiorespiratory causes attributable to SO₂, NO₂, O₃ and PM₁₀ combined from marine emissions were 45 and 265 respectively. Marine emission control measures could contribute a large reduction in mortality and hospital admissions in PRD regions especially in Hong Kong.     

Failure Mode and Spatial Distribution of Damage in Rothbach Sandstone in the Brittle-ductile Transition

— To elucidate the spatial complexity of damage and evolution of localized failure in the transitional regime from brittle faulting to cataclastic ductile flow in a porous sandstone, we performed a series of triaxial compression experiments on Rothbach sandstone (20% porosity). Quantitative microstructural analysis and X-ray computed tomography (CT) imaging were conducted on deformed samples. Localized failure was observed in samples at effective pressures ranging from 5 MPa to 130 MPa. In the brittle faulting regime, dilating shear bands were observed. The CT images and stereological measurements reveal the geometric complexity and spatial heterogeneity of damage in the failed samples. In the transitional regime (at effective pressures between 45 MPa and 130 MPa), compacting shear bands at high angles and compaction bands perpendicular to the maximum compression direction were observed. The laboratory results suggest that these complex localized features can be pervasive in sandstone formations, not just limited to the very porous aeolian sandstone in which they were first documented. The microstructural observations are in qualitative agreement with theoretical predictions of bifurcation analyses, except for the occurrence of compaction bands in the sample deformed at effective pressure of 130 MPa. The bifurcation analysis with the constitutive model used in this paper is nonadequate to predict compaction band formation, may be due to the neglect of bedding anisotropy of the rock and multiple yield mechanisms in the constitutive model.     

Cosmological and astrophysical neutrino mass measurements

Cosmological and astrophysical measurements provide powerful constraints on neutrino masses complementary to those from accelerators and reactors. Here we provide a guide to these different probes, for each explaining its physical basis, underlying assumptions, current and future reach.     

Dynamic Study on Fracture Problems in Viscoelastic Sedimentary Rocks Using the Numerical Manifold Method

The viscoelastic deformation behavior of a sedimentary rock under different loading rates is numerically modeled and investigated by the numerical manifold method (NMM). By incorporating a modified 3-element viscoelastic constitutive mode in the NMM, crack initiation and propagation criteria, and crack identification and evolution techniques, the effects of the loading rates on the cracking behavior of a sedimentary rock, such as crack open displacement, crack sliding displacement, crack initiation, crack propagation and final failure mode, are successfully modeled. The numerical results reveal that under a high loading rate (>1,000 MPa/s), due to the viscoelastic property of the sedimentary rock, not only the structural behavior deviates from that of elastic model, but also different cracking processes and final failure modes are obtained.     

Soil column infiltration tests on biomediated capillary barrier systems for mitigating rainfall-induced landslides

Rainfall-induced landslide is a common geohazard in tropical and humid regions. Capillary barrier system (CBS) is a popular and widely studied mitigating measure for rainfall-induced landslides. However, several previous studies have shown that the performance of the conventional CBS under intense rainfalls has not been particularly convincing. This paper aims to explore the feasibility and effectiveness of a newly proposed system, known as “biomediated capillary barrier system” (B-CBS) in minimizing water infiltration into soil. A one-dimensional soil column was used to investigate the infiltration characteristics of the proposed system. The results showed that the B-CBS of biomediated residual soil overlying original residual soil (Test IV) could effectively control the infiltration into soil by taking advantage of the less-permeable biomediated soil cover. The B-CBS of biomediated residual soil overlying gravelly sand (Test V) and the three-layered B-CBS of fine sand overlying gravelly sand and biomediated residual soil (Test VI) showed the best performance in terms of minimizing the water infiltration. A suction of about 5 kPa still remained in the soil column after 60 min of infiltration from the ponded water on the soil surface.