Rainfall interception in a lower montane forest in Ecuador: effects of canopy properties

Rainfall interception in forests is influenced by properties of the canopy that tend to vary over small distances. Our objectives were: (i) to determine the variables needed to model the interception loss of the canopy of a lower montane forest in south Ecuador, i.e. the storage capacity of the leaves S and of the trunks and branches S_t, and the fractions of direct throughfall p and stemflow p_t; (ii) to assess the influence of canopy density and epiphyte coverage of trees on the interception of rainfall and subsequent evaporation losses. The study site was located on the eastern slope of the eastern cordillera in the south Ecuadorian Andes at 1900–2000 m above sea level. We monitored incident rainfall, throughfall, and stemflow between April 1998 and April 2001. In 2001, the leaf area index (LAI), inferred from light transmission, and epiphyte coverage was determined. The mean annual incident rainfall at three gauging stations ranged between 2319 and 2561 mm. The mean annual interception loss at five study transects in the forest varied between 591 and 1321 mm, i.e. between 25 and 52% of the incident rainfall. Mean S was estimated at 1·91 mm for relatively dry weeks with a regression model and at 2·46 mm for all weeks with the analytical Gash model; the respective estimates of mean S_t were 0·04 mm and 0·09 mm, of mean p were 0·42 and 0·63, and of mean p_t were 0·003 and 0·012. The LAI ranged from 5·19 to 9·32. Epiphytes, mostly bryophytes, covered up to 80% of the trunk and branch surfaces. The fraction of direct throughfall p and the LAI correlated significantly with interception loss (Pearson's correlation coefficient r = −0·77 and 0·35 respectively, n = 40). Bryophyte and lichen coverage tended to decrease S_t and vascular epiphytes tended to increase it, although there was no significant correlation between epiphyte coverage and interception loss. Our results demonstrate that canopy density influences interception loss but only explains part of the total variation in interception loss. Copyright © 2004 John Wiley & Sons, Ltd.     

Third-order depositional sequences reflecting Milankovitch cyclicity

The origin of third-order depositional sequences remains debatable, and in many cases it is not clear whether they were controlled by tectonic activity and/or by eustatic sea-level changes. In Oxfordian and Berriasian–Valanginian carbonate-dominated sections of Switzerland, France, Germany and Spain, high-resolution sequence-stratigraphic and cyclostratigraphic analyses show that the sedimentary record reflects Milankovitch cyclicity. Orbitally induced insolation changes translated into sea-level fluctuations, which in turn controlled accommodation changes. Beds and bedsets formed in rhythm with the precession and 100-kyr eccentricity cycles, whereas the 400-kyr eccentricity cycle contributed to the creation of major depositional sequences. Biostratigraphical data allow the correlation of many of the 400-kyr sequence boundaries with third-order sequence boundaries recognized in European basins. This implies that climatically controlled sea-level changes contributed to the formation of third-order sequences. Furthermore, this cyclostratigraphical approach improves the relative dating of stratigraphic intervals.     

Proportional stress and strain paths in barodesy

Asymptotic behaviour of soil deserves particular attention: If soil is deformed with a proportional strain path, the resulting stress path approaches asymptotically a proportional stress path. In this arcticle, we review existing experimental evidence on this phenomenon and discuss it in the frame of barodesy. Here, the presented relation is a modification of a barodetic expression and includes Jáky's relation, inhibits tensile stress and is able to predict asymptotic stress ratios based on experimental findings. The proposed relation is compared with experimental data as well as with the so‐called stress‐dilatancy relations and other constitutive relations proposed so far. Copyright © 2015 John Wiley & Sons, Ltd.     

Validation of ERS scatterometer‐derived soil moisture data in the central part of the Duero Basin,Spain

The objective of this study was to validate the soil moisture data derived from coarse‐resolution active microwave data (50 km) from the ERS scatterometer. The retrieval technique is based on a change detection method coupled with a data‐based modelling approach to account for seasonal vegetation dynamics. The technique is able to derive information about the soil moisture content corresponding to the degree of saturation of the topmost soil layer (∼5 cm). To estimate profile soil moisture contents down to 100 cm depth from the scatterometer data, a simple two‐layer water balance model is used, which generates a red noise‐like soil moisture spectrum. The retrieval technique had been successfully applied in the Ukraine in a previous study. In this paper, the performance of the model in a semi‐arid Mediterranean environment characterized by low annual precipitation (400 mm), hot dry summers and sandy soils is investigated. To this end, field measurements from the REMEDHUS soil moisture station network in the semi‐arid parts of the Duero Basin (Spain) were used. The results reveal a significant coefficient of determination (R² = 0·75) for the averaged 0–100 cm soil moisture profile and a root mean square error (RMSE) of 2·2 vol%. The spatial arrangement of the REMEDHUS soil moisture stations also allowed us to study the influence of the small‐scale variability of soil moisture within the ERS scatterometer footprint. The results show that the small‐scale variability in the study area is modest and can be explained in terms of texture fraction distribution in the soil profiles. Copyright © 2004 John Wiley & Sons, Ltd.     

On the applicability of viscosity-based capillary bundle concepts to predict the penetration behaviour of polymer solutions into sand

Acta Geotechnica - The increasing use of polymer solutions as support fluids in pile drilling, diaphragm walling or tunnelling applications demands a more detailed discussion of their penetration...     

Global Calibration of SARAL/AltiKa Using Multi-Mission Sea Surface Height Crossovers

SARAL/AltiKa completed its first year in orbit in March 2014. The 1 Hz GDR-T data of the first 10 cycles of the mission are used to perform a comprehensive quality assessment by means of a global multi-mission crossover analysis. Within this approach, SARAL sea surface heights are compared with data from other current missions, mainly Jason-2 and Cryosat-2, to reveal its accuracy and consistency with the other altimeter systems. Alongside with global mean range bias and instrumental drifts, investigations on geographically correlated errors as well as on the realization of the systems origin are performed. The study proves the high quality and reliability of SARAL. The mission shows only a small range bias of about ?5 cm with respect to Jason-2 and neither significant time-tag bias nor instrumental drifts. With 1.3 cm the scatter of radial errors is in the same order of magnitude as for Cryosat-2 and Jason-1 GM and will probably further improve using an enhanced sea state bias (SSB) model. However, the wet tropospheric corrections from SARAL radiometer still show some systematic effects influencing the range bias as well as geographically correlated error patterns and the z-component of the origin. Improved inflight calibration will be necessary to overcome these effects.     

Evidence for Amazonian acidic liquid water on Mars—A reinterpretation of MER mission results

The Mars Exploration Rover (MER) missions have confirmed aqueous activity on Mars. Here we review the analyses of the field-based MER data, and conclude that some weathering processes in Meridiani Planum and Gusev crater are better explained by late diagenetic water-rock interactions than by early diagenesis only. At Meridiani, the discovery of jarosite by MER-1 Opportunity indicates acidic aqueous activity, evaporation, and desiccation of rock materials. MER-based information, placed into the context of published data, point to local and limited aqueous activity during geologically recent times in Meridiani. Pre-Amazonian environmental changes (including important variations in the near-surface groundwater reservoirs, impact cratering, and global dust storms and other pervasive wind-related erosion) are too extreme for pulverulent jarosite to survive over extended time periods, and therefore we argue instead that jarosite deposits must have formed in a climatically more stable period. Any deposits of pre-existent concretionary jarosite surviving up to the Amazonian would not have reached completion in the highly saline and acidic brines occurring at Meridiani. MER-2 Spirit has also revealed evidence for local and limited Amazonian aqueous environmental conditions in Gusev crater, including chemical weathering leading to goethite and hematite precipitation, rock layering, and chemical enhancement of Cl, S, Br, and oxidized iron in rocks and soils. The estimated relative age of the impact crater materials in Gusev indicates that these processes have taken place during the last 2 billion years. We conclude that minor amounts of shallow acidic liquid water have been present on the surface of Mars at local scales during the Amazonian Period.     

Major and trace elements in German bottled water,their regional distribution,and accordance with national and international standards

The market for mineral water has been growing steadily over the last few years. Germany is the country with the highest number of bottled mineral water brands (908 bottled water samples from 502 wells/brands were analyzed). The per capita consumption of mineral water in Germany in 2003 was 129 L. A wide range of values of one to seven orders of magnitude was determined for 71 elements in the bottled water samples analyzed by ICP-QMS, ICP-AES, IC, titration, photometric, conductometric and potentiometric methods. A comparison of the element concentrations and the legal limits for both bottled and tap water (EU, Germany, US EPA, WHO) shows that only 70% of the 908 mineral water samples fulfill the German and EU drinking water (i.e., tap water) regulations for all parameters (not including pH) for which action levels are defined. Nearly 5% of the bottled water samples not fulfill the German and EU regulations for mineral and table water. Comparison of our results with the current German and European action levels for mineral and table water shows that only 42 of the bottled water samples exceed the limits for one or more of the following elements: arsenic, nitrate, nitrite, manganese, nickel and barium concentrations. Ten of the bottled water samples contain uranium concentrations above the 10 μg/L recommended limit.