碳酸盐风化碳汇与森林碳汇的对比——碳汇研究思路和方法变革的必要性

目前,全球碳循环研究主要集中在海洋碳汇以及陆地土壤和植被碳汇,而对岩石风化碳汇仅考虑地质长时间尺度的硅酸盐风化作用,而认为碳酸盐风化在长时间尺度上对碳汇无贡献。然而,碳酸盐相对于硅酸盐有快得多的溶解速度,且对全球变化(特别是气候和CO2变化)的响应迅速,同时由于生物作用和人为活动的影响,使得碳酸盐风化碳汇的能力需要重新评价。最新的研究发现,由碳酸盐溶解、全球水循环及水生生物光合利用溶解无机碳共同作用,即水-岩-气-生相互作用形成的大气碳汇,远远大于之前只估计了河流输运的无机碳汇,其量级与森林碳汇量相当,因此有必要对传统的碳汇研究思路和方法进行某些变革,这有可能为解决所谓的全球“碳失汇”问题找到一条出路。      

Meteorological causes of Harmattan dust in West Africa

We investigated the temporal dynamics of dust entrainment in the Bodélé Depression, Central Sahara, to better understand the intra-annual variability of aerosol emission in the world's largest dust source. The linkages between dust entrainment and large-scale meteorological factors were examined by correlating several meteorological variables in the Mediterranean and Africa north of the equator with the aerosol concentrations in the Bodélé Depression separately for winter and summer. The methodological tools applied are NCEP/NCAR reanalysis data and the aerosol index of the Total Ozone Mapping Spectrometer (TOMS-AI), available for 15 years from 1978 to 1993. We found that dust mobilisation during the Harmattan season is highly dependent on air pressure variability in the Mediterranean area. High pressure to the north of the Bodélé intensifies the NE trade winds, leading to an increased entrainment of dust in the Bodélé Depression. In summer, dust mobilization cannot be explained by the large scale meteorological conditions. This highlights the importance of local to regional wind systems linked to the northernmost position of the intertropical convection zone (ITCZ) during this time.     

Exploring the impact of diagenesis on (isotope) geochemical and microstructural alteration features in biogenic aragonite

For the Quaternary and Neogene, aragonitic biogenic and abiogenic carbonates are frequently exploited as archives of their environment. Conversely, pre‐Neogene aragonite is often diagenetically altered and calcite archives are studied instead. Nevertheless, the exact sequence of diagenetic processes and products is difficult to disclose from naturally altered material. Here, experiments were performed to understand biogenic aragonite alteration processes and products. Shell subsamples of the bivalve Arctica islandica were exposed to hydrothermal alteration. Thermal boundary conditions were set at 100°C, 175°C and 200°C. These comparably high temperatures were chosen to shorten experimental durations. Subsamples were exposed to different ¹⁸O‐depleted fluids for durations between two and twenty weeks. Alteration was documented using X‐ray diffraction, cathodoluminescence, fluorescence and scanning electron microscopy, as well as conventional and clumped isotope analyses. Experiments performed at 100°C show redistribution and darkening of organic matter, but lack evidence for diagenetic alteration, except in Δ₄₇ which show the effects of annealing processes. At 175°C, valves undergo significant aragonite to calcite transformation and neomorphism. The δ¹⁸O signature supports transformation via dissolution and reprecipitation, but isotopic exchange is limited by fluid migration through the subsamples. Individual growth increments in these subsamples exhibit bright orange luminescence. At 200°C, valves are fully transformed to calcite and exhibit purple‐blue luminescence with orange bands. The δ¹⁸O and Δ₄₇ signatures reveal exchange with the aqueous fluid, whereas δ¹³C remains unaltered in all experiments, indicating a carbonate‐buffered system. Clumped isotope temperatures in high‐temperature experiments show compositions in broad agreement with the measured temperature. Experimentally induced alteration patterns are comparable with individual features present in Pleistocene shells. This study represents a significant step towards sequential analysis of diagenetic features in biogenic aragonites and sheds light on reaction times and threshold limits. The limitations of a study restricted to a single test organism are acknowledged and call for refined follow‐up experiments.     

Preparing a seismic hazard model for Switzerland: the view from PEGASOS Expert Group 3 (EG1c)

The seismic hazard model used in the PEGASOS project for assessing earth-quake hazard at four NPP sites was a composite of four sub-models, each produced by a team of three experts. In this paper, one of these models is described in detail by the authors. A criticism sometimes levelled at probabilistic seismic hazard studies is that the process by which seismic source zones are arrived at is obscure, subjective and inconsistent. Here, we attempt to recount the stages by which the model evolved, and the decisions made along the way. In particular, a macro-to-micro approach was used, in which three main stages can be described. The first was the characterisation of the overall kinematic model, the “big picture” of regional seismogenesis. Secondly, this was refined to a more detailed seismotectonic model. Lastly, this was used as the basis of individual sources, for which parameters can be assessed. Some basic questions had also to be answered about aspects of the approach to modelling to be used: for instance, is spatial smoothing an appropriate tool to apply? Should individual fault sources be modelled in an intraplate environment? Also, the extent to which alternative modelling decisions should be expressed in a logic tree structure has to be considered.     

A model for multiphase flow and transport in porous media including a phenomenological approach to account for deformation—a model concept and its validation within a code intercomparison study

Multiphase flow processes in unsaturated cohesive soils are often affected by deformation due to swelling and shrinking as a result of varying water contents. This paper presents a model concept which is denoted ‘phenomenological’ in terms of the processes responsible for soil deformation, since the effects of deformation on flow and transport are only considered by constitutive relations that allow an adaptation of the hydraulic properties. This new model is validated in a detailed intercomparison study with two state-of-the-art models that are capable of explicitly describing the processes relevant for the deformation. A ‘numerical experiment’ with a state-of-the-art reference model is used to produce ‘measurement data’ for an inverse-modelling-based estimation of the model input parameters for the phenomenological concept.     

Estimation of the temporal autocorrelation structure by the collocation technique with an emphasis on soil moisture studies

Abstract

The collocation technique has become a popular tool in oceanography and hydrology for estimating the error variances of different data sources such as in situ sensors, models and remote sensing products. It is also possible to determine calibration constants, for example to account for an off-set between the data sources. So far, the temporal autocorrelation structure of the errors has not been studied, although it is known that it has detrimental effects on the results of the collocation technique, in particular when calibration constants are also determined. This paper shows how the (triple) collocation estimators can be adapted to retrieve the autocovariance functions; the statistical properties as well as the structural deficencies are described. The coupling between the autocorrelation of the error and the estimation of calibration constants is studied in detail, due to its importance for analysing temporal changes. In soil moisture applications, such time variations can be induced, for example, by seasonal changes in the vegetation cover, which affect both models and remote sensing products. The limitations of the proposed technique associated with these considerations are analysed using remote sensing and in situ soil moisture data. The variability of the inter-sensor calibration and the autocovariance are shown to be closely related to temporal patterns of the data.

Editor D. Koutsoyiannis

Citation Zwieback, S., Dorigo, W., and Wagner, W., 2013. Estimation of the temporal autocorrelation structure by the collocation technique with an emphasis on soil moisture studies. Hydrological Sciences Journal, 58 (8), 1729–1747.     

In situ N and C labelling of indigenous and plantation tree species in a tropical mountain forest (Munessa, Ethiopia) for subsequent litter and soil organic matter turnover studies

We propose a novel pragmatic approach of in situ ¹⁵N and ¹³C isotope labelling of trees for subsequent litter decomposition and turnover studies under field conditions. Using this method the labelling of even large trees under natural conditions is possible and compared to tree labelling under artificial conditions in greenhouses the in situ approach is less expensive. ¹³C and ¹⁵N labelling were carried out simultaneously via photosynthesis by tree gassing with ¹³CO₂ and by stem injection of ¹⁵NH₄¹⁵NO₃. The aims of this study were: (i) to produce a sufficient quantity of labelled plant material for subsequent field incubation studies and (ii) to investigate the effectiveness and distribution of in situ ¹⁵N (¹⁵NH₄¹⁵NO₃) and ¹³C (¹³CO₂) labelling of Podocarpus falcatus, Croton macrostachys, Prunus africana and Cupressus lusitanica. The following targets need to be achieved: (i) Assuming almost natural litter fall conditions, enough labelled plant material must be produced in situ for the turnover experiment; (ii) intra-plant tracer enrichment shall be homogeneous; (iii) tracer enrichment should be comparable for different tree species; and (iv) tracer enrichment must be sufficient for subsequent litter turnover studies using the stable isotope approach. Our results clearly demonstrated that several kilograms of labelled plant material can be produced in situ. For many ecosystems, this amount is sufficient for a long term litter turnover experiment on a field scale under almost natural litter fall conditions. However, intra-plant label uptake of ¹³C and ¹⁵N was heterogeneous so that only leaves (litter) should be used for the turnover study. It could be shown that only a part of the labile C and N fraction in the leaves was labelled. Nevertheless, label uptake was sufficient for subsequent litter turnover studies.     

Geochemically induced shifts in catabolic energy yields explain past ecological changes of diffuse vents in the East Pacific Rise 9°50'N area

The East Pacific Rise (EPR) at 9°50'N hosts a hydrothermal vent field (Bio9) where the change in fluid chemistry is believed to have caused the demise of a tubeworm colony. We test this hypothesis and expand on it by providing a thermodynamic perspective in calculating free energies for a range of catabolic reactions from published compositional data. The energy calculations show that there was excess H₂S in the fluids and that oxygen was the limiting reactant from 1991 to 1997. Energy levels are generally high, although they declined in that time span. In 1997, sulfide availability decreased substantially and H₂S was the limiting reactant. Energy availability dropped by a factor of 10 to 20 from what it had been between 1991 and 1995. The perishing of the tubeworm colonies began in 1995 and coincided with the timing of energy decrease for sulfide oxidizers. In the same time interval, energy availability for iron oxidizers increased by a factor of 6 to 8, and, in 1997, there was 25 times more energy per transferred electron in iron oxidation than in sulfide oxidation. This change coincides with a massive spread of red staining (putative colonization by Fe-oxidizing bacteria) between 1995 and 1997. For a different cluster of vents from the EPR 9°50'N area (Tube Worm Pillar), thermodynamic modeling is used to examine changes in subseafloor catabolic metabolism between 1992 and 2000. These reactions are deduced from deviations in diffuse fluid compositions from conservative behavior of redox-sensitive species. We show that hydrogen is significantly reduced relative to values expected from conservative mixing. While H₂ concentrations of the hydrothermal endmember fluids were constant between 1992 and 1995, the affinities for hydrogenotrophic reactions in the diffuse fluids decreased by a factor of 15 and then remained constant between 1995 and 2000. Previously, these fluids have been shown to support subseafloor methanogenesis. Our calculation results corroborate these findings and indicate that the 1992-1995 period was one of active growth of hydrogenotrophic communities, while the system was more or less at steady state between 1995 and 2000.     

Zircon response to high-grade metamorphism as revealed by U–Pb and cathodoluminescence studies

Correct interpretation of zircon ages from high-grade metamorphic terrains poses a major challenge because of the differential response of the U–Pb system to metamorphism, and many aspects like pressure–temperature conditions, metamorphic mineral transformations and textural properties of the zircon crystals have to be explored. A large (c. 450?km²) coherent migmatite complex was recently discovered in the Bohemian Massif, Central European Variscides. Rocks from this complex are characterized by granulite- and amphibolite-facies mineral assemblages and, based on compositional and isotopic trends, are identified as the remnants of a magma body derived from mixing between tonalite and supracrustal rocks. Zircon crystals from the migmatites are exclusively large (200–400?μm) and yield ²⁰⁷Pb/²⁰⁶Pb evaporation ages between 342–328?Ma and single-grain zircon fractions analysed by U–Pb ID-TIMS method plot along the concordia curve between 342 and 325?Ma. High-resolution U–Pb SHRIMP analyses substantiate the existence of a resolvable age variability and yield older ²⁰⁶Pb/²³⁸U ages (342–330?Ma, weighted mean age?=?333.6?±?3.1?Ma) for inner zone domains without relict cores and younger ²⁰⁶Pb/²³⁸U ages (333–320?Ma, weighted mean age?=?326.0?±?2.8?Ma) for rim domains. Pre-metamorphic cores were identified only in one sample (²⁰⁶Pb/²³⁸U ages at 375.0?±?3.9, 420.3?±?4.4 and 426.2?±?4.4?Ma). Most zircon ages bracket the time span between granulite-facies metamorphism in the Bohemian Massif (~345?Ma) and the late-Variscan anatectic overprint (Bavarian phase, ~325?Ma). It is argued that pre-existing zircon was variously affected by these metamorphic events and that primary magmatic growth zones were replaced by secondary textures as a result of diffusion reaction processes and replacement of zircon by dissolution and recrystallization followed by new zircon rim growth. Collectively, the results show that the zircons equilibrated during high-grade metamorphism and record partial loss of radiogenic Pb during post-peak granulite events and new growth under subsequent anatectic conditions.     

Drinking water production from surface water sources in the tropics: Brasília DF,Brazil

Drinking water production at three waterworks was evaluated with respect to variable weather conditions in the Brasília Distrito Federal. Results of the investigation revealed that seasonal variations in rainfall play an important role in influencing the quality of the surface water sources used for drinking water production in the district. In most surface sources, particles and apparent colour are likely to originate from erosion during rain events. This represents the primary challenge facing waterworks, notably when the raw water qualities of the sources to be treated at one facility differ by one order of magnitude, as well significantly varying from one season to the next. Treatment efficiencies in terms of turbidity, apparent colour and dissolved organic carbon (DOC) removal were evaluated. Drinking water quality was found to be significantly influenced by raw water quality at all considered treatment plants. With regard to DOC removal, treatment was most efficient in waterworks which treated raw water with high percentages of biopolymers and humics. Most dissolved organics were removed by coagulation. Finally, conclusions are drawn on how to better cope with challenges facing drinking water production in a tropical climate. The first of these recommendations is the introduction of online turbidity and dissolved organic matter monitoring in order to optimise the coagulation process for the removal of these two parameters. A combination of different coagulants could also be considered for this process. Additional more sophisticated improvements to process stability, such as determination of floc characteristics, introduction of artificial neural networks or the eventual upgrade of the treatment train using membrane filtration, are also suggested.