Carbon balance in a salt marsh: Interactions of diffusive export, tidal deposition and rainfall-caused erosion

Studies of the concentrations of particulate and dissolved organic carbon in the Duplin River, of the tidal exchange of POC and DOC in the marsh, of the standing stock and movement of Spartina alterniflora wrack in the Duplin, and of the removal of carbon from the surface of the marsh by rain were conducted at Sapelo Island, Georgia in order to test three hypotheses about export of carbon from the Duplin River watershed. We found that the gradients in POC and DOC concentrations are such that carbon is being transported down the Duplin River throughout the year, although in smaller quantities than previously believed. In contrast, almost all tidal exchanges within the marsh result in deposition of carbon. Most of this deposited carbon is subsequently eroded as a result of rain falling on the exposed marsh surface, and is washed back into the tidal creeks. This cycle of deposition and erosion is a possible mechanism keeping POC in the thin aerobic surface layer of the marsh, thus increasing its availability to detritivores and aerobic microbes. The standing stock of wrack is only a fraction of the S. alterniflora produced each year, and its export is a negligible term in the carbon balance equation.     

Coral Recruitment and Regeneration on a Maldivian Reef 21 Months after the Coral Bleaching Event of 1998

Abstract. This paper describes the quantitative inventory of stony corals on a Maldivian reef after the bleaching event of 1998. The detailed data, collected in March 1999 and March 2000, comprise survival, new recruitment and regenerates. They were obtained in 6 transects laid out randomly on the reef flat, on 22 Acropora tables on 6 sites at the reef edge and on 39 Porites lobata blocks and 1 Diploastrea heliopora colony. The present cover of living zooxanthellate corals is reduced to ca. 2 – 5 % of its previous state. Acroporidae and Pocilloporidae were practically wiped out, while Poritidae survived partly and Agariciidae (esp. Pavona) are now the dominant group. New settlements on dead Acropora tables were mainly Agariciidae, followed by Acroporidae and Pocilloporidae. Regenerates on Porites were pronounced and the apparent yearly increase in mass was about threefold that of Diploastrea, which is 3 – 4 mm per year. The influence on reef ecology in terms of coral substrate and species, possible sources of larvae, change of guilds in reef builders, other species and the prospect for further development of the reef, with respect to growth versus erosion, is discussed.     

Chemical abundances from B-stars in the Magellanic Clouds

We observed near-Main-Sequence B-stars in the Magellanic Clouds with the 3.6 m telescope and CASPEC at La Silla. We obtained spectra of high resolution and high S/N-ratio. The stars are members of the blue globular clusters NGC 1818 (LMC) and NGC 330 (SMC). The spectra are used for differential abundance analyses using HER as galactic reference star. Apart from CNO the metals are underabundant by about a factor of three and four for the LMC and SMC star, respectively. The CNO pattern is interesting since in both stars oxygen is considerably more abundant than carbon.Based on observations collected at ESO, La Silla and on Calar Alto, Spain and on observations made with the International Ultraviolet Explorer.     

Application of X-ray computed tomography for analyzing cleat spacing and cleat aperture in coal samples

New techniques to determine distributions of cleat aperture, cleat orientation and cleat spacing from CT scans have been developed. For cleat orientation and spacing distributions, two different coal blocks were scanned. The CT scans have been analyzed for the three orthogonal directions. Histograms of the cleat orientations are bimodal, expressing the typical cleat texture of face and butt cleats and bedding perpendicular relaxation fractures. Deviations up to 20° from the peak values in the cleat orientation distributions were used as input for automated image analysis of cleat spacing. Distributions of the cleat spacing measurements are related to the face and butt cleat directions. The term “relevant cleat length” is introduced as a measure to extract the amount of cleat length involved with the cleat spacing measurements. The ratio ranges from 0.03 to 0.38 and expresses the difference in cleat texture in both samples. Cleat spacing versus relevant cleat length shows sample specific patterns for face cleat, butt cleat and bedding. To describe cleat aperture quantitatively, peak height and missing attenuation have been used. The image of a cleat was seen as a convolution of a rectangular fracture profile with a Gaussian point spread function.     

The geography of water conflict and cooperation: internal pressures and international manifestations

Studies on transboundary water conflict and cooperation generally consider interstate relations over shared water resources as distinct from intrastate relations. While connections have been made between international water relations and regional relationships in general, it is conceivable that international water conflict and cooperation may also be influenced by domestic water events and vice versa. This paper seeks to investigate the dynamics of water interactions across geographic scale and their relationship to broader international affairs. The research approach involves the creation of an analytical framework for assessing possible linkages between external and internal interactions over freshwater resources. The framework is applied to three case studies – the Middle East, South Asia and Southern Africa – utilizing 'event data'. To validate the findings from the quantitative analyses, the results are compared with conventional qualitative understandings of water and overall relations in the three regions. The comparison demonstrates not only the efficacy of the analytical framework in general, but also highlights, at least in terms of the specific case studies selected, the disparate water dynamics across geographic regions and the importance of considering water events, both national and international, within larger political and historical contexts.     

Development of large‐scale seismites in Upper Cretaceous fluvial sandstones in a fault‐proximal setting

Large‐scale soft‐sediment deformation structures occur within fluvial sandstone bodies of the Upper Cretaceous Wahweap Formation in the Kaiparowits basin, southern Utah, USA. These structures represent an exceptional example of metre‐scale fault‐proximal, seismogenic load structures in nearly homogenous sandstones. The load structures consist of two types: large‐scale load casts and wedge‐shaped load structures. Large‐scale load casts penetrate up to 4·5 m into the underlying sandstone bed. Wedge‐shaped load structures include metre‐scale, parallel, sub‐vertical features and decimetre‐scale features along the periphery of the large‐scale load casts or other wedge‐shaped load structures. Wedge‐shaped load structures contain well‐developed, medial cataclastic shear deformation bands. All load structures contain pervasive well‐defined millimetre‐thick to centimetre‐thick internal laminae, oriented parallel to the outside form of the load structures and asymptotic to deformation bands. Both types of load structures formed because of an inverted density profile, earthquake‐triggered liquefaction and growth of irregularities (a Rayleigh–Taylor instability) on the sandstone–sandstone erosional contact. The internal laminae and deformation bands formed during deformation and clearly demonstrate polyphase deformation, recording a transition from liquefied to hydroplastic to brittle modes of deformation. Decimetre‐scale wedge‐shaped load structures on the edge of the large‐scale load casts probably formed towards the end of a seismic event after the sediment dewatered and increased the frictional contact of grains enough to impart strength to the sands. Metre‐scale wedge‐shaped load structures were created as the tips of downward foundering sediments were driven into fractures, which widened incrementally with seismic pulsation. With each widening of the fracture, gravity and a suction effect would draw additional sediment into the fracture. Superimposed laminae indicate a secondary syndeformational origin for internal laminae, probably by flow‐generated shearing and vibrofluidization mechanisms. Large‐scale and wedge‐shaped load structures, polyphase deformation and secondary laminae may characterize soft‐sediment deformation in certain fault‐proximal settings.     

Can the ten-dimensional phase prior to Calabi-Yau splitting of the super-string phase generate the primordial entropy of the universe?

It is shown that the primordial entropy of the universe can be generated in the residual phase prior to Calabi-Yau splitting and following the passing to the field theory limit of the heterotic super-string in ten space-time dimensions, wherein matter is represented by either a radiative equation of state or the equation of state for stiff matter.     

Shock deformation confirms the impact origin for the Cerro do Jarau,Rio Grande do Sul,Brazil, structure

Cerro do Jarau is a conspicuous, circular morpho‐structural feature in Rio Grande do Sul State (Brazil), with a central elevated core in the otherwise flat “Pampas” terrain typical for the border regions between Brazil and Uruguay. The structure has a diameter of approximately 13.5 km. It is centered at 30^o12′S and 56^o32′W and was formed on basaltic flows of the Cretaceous Serra Geral Formation, which is part of the Paraná‐Etendeka Large Igneous Province (LIP), and in sandstones of the Botucatu and Guará formations. The structure was first spotted on aerial photographs in the 1960s. Ever since, its origin has been debated, sometimes in terms of an endogenous (igneous) origin, sometimes as the result of an exogenous (meteorite impact) event. In recent years, a number of studies have been conducted in order to investigate its nature and origin. Although the results have indicated a possible impact origin, no conclusive evidence could be produced. The interpretation of an impact origin was mostly based on the morphological characteristics of the structure; geophysical data; as well as the occurrence of different breccia types; extensive deformation/silicification of the rocks within the structure, in particular the sandstones; and also on the widespread occurrence of low‐pressure deformation features, including some planar fractures (PFs). A detailed optical microscopic analysis of samples collected during a number of field campaigns since 2007 resulted in the disclosure of a large number of quartz grains from sandstone and monomict arenite breccia from the central part of the structure with PFs and feather features (FFs), as well as a number of quartz grains exhibiting planar deformation features (PDFs). While most of these latter grains only carry a single set of PDFs, we have observed several with two sets, and one grain with three sets of PDFs. Consequently, we here propose Cerro do Jarau as the seventh confirmed impact structure in Brazil. Cerro do Jarau, together with Vargeão Dome (Santa Catalina state) and Vista Alegre (Paraná State), is one of very few impact structures on Earth formed in basaltic rocks.