TraceeElements in Leccinum scabrum mushrooms and topsoils from Kłodzka Dale in Sudety Mountains, Poland

In the current study, we determined concentrations and transfer rates of Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, P, Rb, Sr and Zn to Brown Birch Scaber Stalks (Leccinum scabrum) mushrooms emerged in the area of Sudety Mountains (Sudetes) in Poland. Fruiting bodies and topsoil samples beneath L. scabrum were collected form the K odzka Dale. The trace elements were determined using validated method and inductively coupled plasma - atomic emission spectroscopy (ICP-AES) for final measurement. Mushrooms contained Ag, Cr, Hg, Co, Ni and Sr at < 1.0 μg/g dry weight; Ba and Pb at ~1.0 μg/g dw; Cd at < 5 μg/g dw; Cu and Mn at > 10 μg/g dw; Al and Ca at ~100 μg/g dw; Fe, Na, Rb and Zn at 100 to 500 μg/g dw, Mg at ~1,000 μg/g dw; P at ~5,000 μg/g dw and K at ~30,000 μg/g dw. Ca, Mn and Ni were nearly equally distributed between stipes and caps; stipes compared to caps were enriched in Ba, Na and Sr, while caps were enriched in Ag, Al, Cd, Co, Cr, Cu, Fe, K, P, Pb, Rb and Zn. The values of bioconcentration factor (BCF) varied highly depending on chemical element and were >1 for Ag, Cd, Cu, K, Mg, Na, P, Rb and Zn, while <1 for Al, Ba, Ca, Co, Cr, Fe, Mn, Ni, Pb and Sr. Topsoil showed elevated content of lead and mean concentration was 99 ± 32 μg/g dw, while cadmium was at 0.41 ± 0.15 and those two highly toxic to human elements occurred in edible caps of L. scabrum at 4.5 ± 2.2 and 2.9 ± 2.0 μg/g dw, respectively.     

Environmental change,hydromorphological reference conditions and the restoration of Polish Carpathian rivers

In the twentieth century Polish Carpathian rivers were considerably modified by channelization and gravel mining, with significant detrimental effects to their ecological integrity, vertical stability of the streambeds and flood hazard to downstream river reaches. Restoration of the rivers is thus necessary to improve their ecological status and re‐establish geomorphic dynamic equilibrium conditions. Various approaches to defining hydromorphological reference conditions, proposed to date in river restoration literature, have serious deficiencies. In particular, environmental changes that took place in the catchments of Carpathian rivers during the twentieth century invalidate the historical state of the rivers as reference for their restoration. This is illustrated by a change from bar‐braided to island‐braided channel pattern that occurred in the past century in unmanaged sections of the Czarny Dunajec in response to a reduction in flow and sediment dynamics of the river. We indicate that reference conditions should be defined as those which exist or would exist under present environmental conditions in the catchment but without human influence on the channel, riparian zone and floodplain of the river which is to be restored. This assumption was tested through the evaluation of hydromorphological river quality of the Czarny Dunajec according to the European Standard EN‐14614. The evaluation confirmed a high‐status hydromorphological quality in an unmanaged channel section, which can thus be used as a reference for restoration of impacted river sections. Copyright © 2012 John Wiley & Sons, Ltd.     

Differences in the abiotic parameters of water in coastal lakes in the light of the EU water framework directive: An example of the Polish southern Baltic coast

Coastal lakes have a specific hydrological regime determined by the influence of sea and inland water and the local hydrographic conditions. There are several problems concerning the protection and assessment of water quality of these bodies. The most important features differentiating coastal lakes from other lakes are: high salinity, a wide range of seasonal and short-term water quality changes, and specific aquatic ecosystems adapted to these conditions. These matters have not been sufficiently taken into account in the existing classifications and typologies of lakes in Poland. The problem has not been solved by the establishment of the adequate reference conditions and new guidelines for the classification of water status (which are being prepared according to the Common Strategy for the Implementation of the Water Framework Directive) regarding inland surface waters (rivers and lakes) and marine waters (coastal and transitional). An important issue is to define criteria which would help to distinguish all those hydrographic objects and to establish water quality standards for them.     

Effect of Time on Dynamic Shear Modulus of Selected Cohesive Soil of One Section of Express Way No. S2 in Warsaw

Several researches published comprehensive reports on dynamic soil properties of cohesive soils, in which many of them outlined, i.e., key factors affecting the dynamic shear modulus. For cohesive soils, the modulus at small strains (g < 10^t-3 %) is, first of all, a function of void ratio and effective confining stress. For clays, however, secondary time effects and clay mineralogy (fabric and structure) also appear to be important. The influence of confinement of laboratory-prepared as well as naturally deposited clays consists in an increase of shear modulus logarithmically as a function of time. In this paper, the effect of duration of the various confining pressures on dynamic shear modulus (G) of selected cohesive soils from Warsaw area was evaluated. Shear modulus was determined on the basis of resonant column tests, at low and high shearing strain amplitudes. It is shown that the calculated shear modulus is time-dependent; during approximately first 1000 minutes of consolidation, the moduli increased by almost 50%. Moreover, it is characterized by two phases: an initial one results from primary consolidation and a second one, which occurs after the end of primary consolidation, herein about 16-17 hours, and is called “long-term time effect”. This effect was found also for modulus at higher shearing strains (γ > 10³%, e.g., 3 × 10³%, 5 × 10³%, 8 × 10³%, 2 × 10³%).     

Response of unconfined turbidity current to normal‐fault topography

Turbidity currents descending the slopes of deep‐water extensional basins or passive continental margins commonly encounter normal‐fault escarpments, but such large‐magnitude phenomena are hydraulically difficult to replicate at small scale in the laboratory. This study uses advanced computational fluid dynamics numerical simulations to monitor the response of large, natural‐scale unconfined turbidity currents (100 m thick and 2000 m wide at the inlet gate) to normal‐fault topography with a maximum relief of nearly 300 m. For comparative purposes, the turbidity current is first released on a non‐faulted pristine slope of 1·5° (simulation model 1). The expanding and waxing flow bypasses the slope without recognizable deposition within the visibility limit of 8 vol.% sand grain packing. Similar flow is then released towards the tip (model 2) and towards the centre (model 3) of a normal‐fault escarpment. In both of these latter models, the sand carried by flow tends to be entrapped in four distinct depozones: an upslope near‐gate zone of flow abrupt expansion and self‐regulation; a flow‐transverse zone at the fault footwall edge; a flow‐transverse zone at the immediate hangingwall; and a similar transverse zone near the crest of the hangingwall counter‐slope, where some of the deposited sand also tends to be reshuffled to the previous zone by a secondary reverse underflow. The near‐bottom reverse flow appears to be generated on a counter‐slope of 1·1°, increased to 2·0° by deposition. The Kelvin–Helmholtz interface instability plays an important role by causing three‐dimensional fluctuations in the flow velocity magnitude and sediment concentration. The thick deposits of large single‐surge flows may thus show hydraulic fluctuations resembling those widely ascribed to hyperpycnal flows. The study indicates further that the turbiditic slope fans formed on such fault topographies are likely to be patchy and hence may differ considerably from the existing slope‐fan conceptual models when it comes to the spatial prediction of main sand depozones.     

Oxfordian magnetostratigraphy of Poland and its correlation to Sub-Mediterranean ammonite zones and marine magnetic anomalies

A nearly continuous magnetostratigraphic polarity pattern was compiled from several ammonite-zoned carbonate successions of southern Poland and from a composite magnetostratigraphy from the Iberian Range of Spain. The array of sections spans the middle two-thirds of the Oxfordian within the Sub-Mediterranean Province (Cordatum through Bifurcatus ammonite zones). The average paleopole calculated from eight of these Polish sections is at 78.5°N, 184.9°E (δp = 2.6°, δm = 3.5°). The Sub-Mediterranean polarity pattern is consistent with an independent polarity pattern derived from the Boreal-realm sections of the British Isles, and improves the inter-correlation between these faunal realms. Cycle stratigraphy published for these ammonite subzones from southern France enabled temporal scaling of the polarity pattern, thereby facilitating correlation to marine magnetic anomalies M28 through M33 as modeled from deep-tow magnetometer surveys in the Western Pacific. The bases of the Middle and Upper Oxfordian substages as defined in the Sub-Mediterranean zonation in Poland correspond approximately to chrons M33 and M29 of that Pacific M-sequence model.     

Foraging strategy of little auks under divergent conditions on feeding grounds

A dual foraging strategy (long versus short trips) has been described for some species of seabirds, such as petrels, albatrosses (Procellariiformes) and penguins (Sphenisciphormes). Such a strategy has recently been reported for little auks ( Alle alle ) from the central coast of west Spitsbergen, Svalbard. This has been explained as a response to poor trophic conditions close to the breeding colony, and better conditions further away (150 km). In the present study, we investigated the foraging strategy of little auks in Hornsund, southern Spitsbergen, during two seasons with contrasting oceanographic conditions. During 2004, foraging conditions for little auks were good: cold Arctic waters rich in profitable high-energy food were dominant in their feeding grounds. Conversely, during 2006 there was a great influx of warm Atlantic water in the feeding area, inducing poor foraging conditions. In both seasons we examined the pattern of foraging trip lengths automatically with a video camera (both adults from four nests in each year), and by direct non-stop observation of 20–54 individually marked birds. Our results showed that the dual strategy and the ratio of short and long trips were consistent, regardless of the conditions in the feeding grounds. This suggests that the strategy is inherent and may be crucial for the self-maintenance of adults.     

New marine ΔR values for Arctic Canada

For more than four decades, the reporting of ¹⁴C dates on marine molluscs from Arctic Canada has been notable for the lack of consistently applied marine reservoir corrections. We propose that the common approach of reporting Canadian Arctic marine ¹⁴C dates using presumed time-invariant reservoir corrections be abandoned in favour of calibration of ¹⁴C dates, using the current standard protocol. This approach best facilitates inter- and intra-regional correlation, and correlation with other geochronometers. In order to enable the consistent calibration of marine ¹⁴C dates from Arctic Canada, we analysed a ¹⁴C database of 108 marine mollusc samples collected live between 1894 and 1956, and determined regional reservoir offset values (ΔR) for eight oceanographically distinct regions. The following new ΔR values should be used for ¹⁴C calibration: NW Canadian Arctic Archipelago, 335 ± 85 yrs; Foxe Basin, 310 ± 90 yrs; NE Baffin Island, 220 ± 20 yrs; SE Baffin Island, 150 ± 60 yrs; Hudson Strait, 65 ± 60 yrs; Ungava Bay, 145 ± 95 yrs; Hudson Bay, 110 ± 65 yrs; and James Bay, 365 ± 115 yrs.