Rock relationships in the Mogok metamorphic belt, Tatkon to Mandalay, central Myanmar

The Mogok metamorphic belt (MMB), over 1450 km long and up to 40 km wide, consists of regionally metamorphosed rocks including kyanite and sillimanite schists and granites lying along the Western margin of the Shan Plateau in central Myanmar and continuing northwards to the eastern Himalayan syntaxis. Exposures in quarries allow correlation of Palaeozoic meta-sedimentary, early Mesozoic meta-igneous and late Mesozoic intrusive rocks within a 230 km long northerly-trending segment of the MMB, from Tatkon to Kyanigan north of Mandalay, and with the Mogok gemstone district 100 km to the northeast. Relationships among the metamorphic and intrusive rocks, with sparse published radiometric age controls, indicate at least two metamorphic events, one before and one after the intrusion of Late Jurassic to early Cretaceous calc-alkaline rocks. These relationships can be explained by either of two possible tectonic histories. One, constrained by correlation of mid-Permian limestones across Myanmar, requires early Permian and early Jurassic regional metamorphic events, prior to an early Tertiary metamorphism, in the western part of but within a Shan-Thai – western Myanmar block. The second, not compatible with a single laterally continuous Permian limestone, requires pre-Upper Jurassic regional metamorphism and orogenic gold mineralization in the Mergui Group and western Myanmar, early Cretaceous collision of an east-facing Mergui-western Myanmar island arc with the Shan Plateau, and early Tertiary metamorphism in the MMB related to reversal in tectonic polarity following the arc-Plateau collision.     

A Robust Texture Analysis and Classification Approach for Urban Land‐Use and Land‐Cover Feature Discrimination

Abstract

Attempts to analyze urban features and to classify land use and land cover directly from high‐resolution satellite data with traditional computer classification techniques have proven to be inefficient for two primary reasons. First, urban landscapes are composed of complex features. Second, traditional classifiers employ spectral information based on single pixel value and ignore a great amount of spatial information. Texture plays an important role in image segmentation and object recognition, as well as in interpretation of images in a variety of applications. This study analyzes urban texture features in multi‐spectral image data. Recent developments in the very powerful mathematical theory of wavelet transforms have received overwhelming attention by image analysts. An evaluation of the ability of wavelet transform in urban feature extraction and classification was performed in this study, with six types of urban land cover features classified. The preliminary results of this research indicate that the accuracy of texture analysis in classifying urban features in fine resolution image data could be significantly improved with the use of wavelet transform approach.     

Climate change and groundwater resources in Myanmar

Myanmar is located in Southeast Asia within the Mekong River Basin. The estimated annual surface and groundwater potentials are 1 081 km3 and 494 km3, respectively. Based on geological conditions, 11 different types of aquifers have been classified in Myanmar. The recent alluvial formation, Irrawaddy formation, Upper Pegu Group and Plateau limestone formation are the major water-bearing geologic formations of the country. In Myanmar, 89% of the groundwater is used for agriculture, approximately 8% is used for domestic consumption, and 3% is used for industrial purposes. Climate change projections for Myanmar from 2001 to 2100 predict general increases in temperature, clear-sky days, rainfall variability and flooding risks and a greater occurrence and intensity of extreme weather events across the country. Additional technology and investments are required to achieve groundwater resource security in response to climate changes. In addition, methods of ensuring the sustainability of groundwater resources must be implemented via collaborations with other countries and international sources.     

Geology of the High Sulfidation Copper Deposits,Monywa Mine,Myanmar

The 50 km² Monywa copper district lies near the Chindwin River within the northward continuation of the Sunda‐Andaman magmatic arc through western Myanmar. There are four deposits; Sabetaung, Sabetaung South, Kyisintaung, and the much larger Letpadaung 7 km to the southeast. Following exploration drilling which began in 1959, production of copper concentrates from a small open pit started at Sabetaung in 1983. Since 1997, when resources totaled 7 million tonnes contained copper in 2 billion tonnes ore, a heap leach–electro‐winning operation has produced over 400,000 t copper cathode from Sabetaung and Sabetaung South. Ore is hosted by mid‐Miocene andesite or dacite porphyry intrusions, and by early mid‐Miocene sandstone and overlying volcaniclastics including eruptive diatreme facies which the porphyries intrude. District‐wide rhyolite dykes and domes with marginal breccias probably post‐date andesite porphyries in the mine area and lack ore‐grade copper. Host rocks to mineralization are altered to phyllic and advanced argillic hydrothermal assemblages within an outer chlorite zone; hypogene alunite is most abundant at Letpadaung and Kyisintaung. Most mineralization is structurally‐controlled with digenite‐chalcocite in breccia dykes, in steeply dipping NE‐trending sheeted veins, and in stockwork and low‐angle sulfide veins. A high‐grade pipe at Sabetaung grades up to 30% Cu, and much of the ore at Sabetaung South is in a NE‐trending zone of mega‐breccia and stockworked sandstone. The hydrothermal alteration, together with replacement quartz, alunite and barite in breccia dykes and veins, the virtual absence of vein quartz, and the presence of chalcopyrite and bornite only as rare veins and as inclusions within the abundant pyrite, indicate that the deposits are high sulfidation. Regional uplift, resistance to erosion and leaching of the altered and mineralized rocks have resulted in porous limonite‐stained leached caps over 200 m thick forming the Letpadaung and Kyisintaung hills. The barren caps pass abruptly downwards at the water table into the highest grade ore at the top of the supergene enrichment zone, within which copper grade, supergene kaolinite and cubic alunite decrease, and pyrite increases with depth; in contrast, marcasite is mostly shallow. Much of the copper to depths exceeding 200 m below the water table occurs as supergene digenite‐chalcocite and minor covellite. Disseminated chalcocite is mostly near‐surface and hence almost certainly supergene. We infer that during prolonged uplift at all four deposits, oxidation of residual pyrite at the water table generated enough acid to leach all the copper from earlier supergene‐enriched ore; below the water table the resulting acid sulfate solutions partly replaced enargite, covellite, chalcopyrite, bornite and pyrite with supergene chalcocite. Undeformed upward‐fining cross‐bedded conglomerates and sands of the ancestral Chindwin River floodplain overlie the margins of the Sabetaung deposits, form a major aquifer up to 40 m thick, and are a potential host for exotic copper mineralization. A mid‐Miocene pluton is inferred to underlie the Monywa deposits, but the possibility of porphyry‐type mineralization within the district is at best highly speculative.     

Laboratory investigation on the compressibility of Singapore marine clays

The compressibility characteristics of Singapore marine clay in reconstituted and undisturbed states were studied using oedometer, constant rate of strain, Rowe cell, and isotropic consolidation tests. The intrinsic compression curve of the reconstituted clay was found to be similar to that proposed earlier with some minor deviations at low vertical stresses of less than 100?kPa. The field and laboratory compression behaviors were found to be similar, hence the laboratory curve could be used as a reference for interpreting the field behavior. Factors affecting the measurements of compression index and yield stress were discussed. As the coefficient of lateral earth pressure at the top upper clay was close to 1, the compression curves of vertically and horizontally trimmed samples were almost similar. The yield stress was mainly controlled by the strain rate; i.e., the higher strain rate resulted in the higher yield stress. Constrained modulus as derived from cone penetration tests and flat dilatometer tests were also examined and compared with laboratory test results. The in situ tests showed the decrease in constrained modulus with depth and generally the dilatometer test was found to register a higher modulus value.     

Geology and Skarn Cu–Bi–Au Mineralization at Shwe Min Bon Area,Kalaw Township,Southern Shan State,Myanmar

The Shwe Min Bon Cu–Au skarn deposit lies within one of the largest Au–Cu belts in Myanmar. The deposit is situated along the Shan scarp zone, which marks the boundary between the Myanmar central basin to the west and the Shan plateau to the east. The Shwe Min Bon deposit comprises skarn‐type metasomatic alteration, and the Cu–Au mineralization occurs along the contact face between the Nwabangyi Dolomite and Shweminbon Formation and the Cretaceous dioritic rocks. The metasomatic process resulted in pro‐ and retrograde mineral assemblages in exoskarn. Hydrothermal activities in the Shwe Min Bon deposit are classified into prograde, retrograde stage I, and retrograde stage II. The prograde skarn is classified into a proximal garnet skarn with minor clinopyroxene and a distal wollastonite skarn. Chlorite, epidote, and tremolite–actinolite were formed during the retrograde stage I. Cu–Au mineralization mainly occurred in retrograde stage I, which was characterized by moderate temperatures (260–320 °C) and fluid with a moderate salinity (5.0–6.0% NaCl equiv.). Low temperature (180–200 °C) and low salinity (2.0–3.0% NaCl equiv.) were responsible for retrograde stage II. Au mineralization is mainly associated with chalcopyrite and tennantite in retrograde stage I and with tellurobismuthite in retrograde stage II.     

Chloritoid and barroisite-bearing pelitic schists from the eclogite unit in the Besshi district, Sanbagawa metamorphic belt

The Sanbagawa metamorphic rocks in the Besshi district, central Shikoku, are grouped into eclogite and noneclogite units. Chloritoid and barroisite-bearing pelitic schists occur as interlayers within basic schist in an eclogite unit of the Seba area in the Sanbagawa metamorphic belt, central Shikoku, Japan. Major matrix phases of the schists are garnet, chlorite, barroisite, paragonite, phengite, and quartz. Eclogite facies phases including chloritoid and talc are preserved only as inclusions in garnet. P–T conditions for the eclogite facies stage estimated using equilibria among chloritoid, barroisite, chlorite, interlayered chlorite–talc, paragonite, and garnet are 1.8 GPa/520–550 °C. Zonal structures of garnet and matrix amphibole show discontinuous growth of minerals between their core and mantle parts, implying the following metamorphic stages: prograde eclogite facies stage→hydration reaction stage→prograde epidote–amphibolite stage. This metamorphic history suggests that the Seba eclogite lithologies were (1) juxtaposed with subducting noneclogite lithologies during exhumation and then (2) progressively recrystallized under the epidote–amphibolite facies together with the surrounding noneclogite lithologies.

The pelitic schists in the Seba eclogite unit contain paragonite of two generations: prograde phase of the eclogite facies included in garnet and matrix phase produced by local reequilibration of sodic pyroxene-bearing eclogite facies assemblages during exhumation. Paragonite is absent in the common Sanbagawa basic and pelitic schists, and is, however, reported from restricted schists from several localities near the proposed eclogite unit in the Besshi district. These paragonite-bearing schists could be lower-pressure equivalents of the former eclogite facies rocks and are also members of the eclogite unit. This idea implies that the eclogite unit is more widely distributed in the Besshi district than previously thought.     

Porphyry-Type Mineralization at Selogiri Area, Wonogiri Regency, Central Java, Indonesia

The Selogiri area, situated in Wonogiri regency, Central Java, is one of several gold prospecting areas in the Southern areas Mountain Range in Java, Indonesia. Three types of dioritic–andesitic intrusive rocks occur in the Selogiri area, namely, hornblende andesite porphyry, hornblende diorite porphyry and hornblende diorite, exposed in a half‐circular depression where volcanic breccia and tuff are widely distributed. The occurrence of stockwork quartz veinlets and associated with magnetite and malachite coating along the cracks in the diorite porphyry suggests porphyry type mineralization. This is also supported by the occurrence of polyphase hypersaline fluid inclusions in the stockwork veinlet quartz. Small‐scale miners are mining NS‐trending quartz veins for gold associated with base metal sulfides. These veins are probably epithermal‐type mineralization that overprinted porphyry‐type mineralization. The Neogene intermediate to silicic hydrous magmatism in Java could have formed the porphyry‐type mineralization in Selogiri, as in the rest of the Sunda–Banda arc.     

Observed characteristics of flow,water mass,and turbulent mixing in the Preparis Channel

Preparis Channel is the very important exchange path of energy and materials between the northern Bay of Bengal and Andaman Sea(AS). A set of hydrographic measurements, a microstructure profiler, and a deep mooring were used to determine the characteristics of water masses, turbulent mixing, and flows in the Preparis Channel. The unprecedented short-term mooring data reveal that a deep current in the deep narrow passage(below 400 m) of the Preparis Channel flows toward the Bay of Bengal(BoB) wit...