A comparison of the early diagenetic environment in intertidal sands and muds of the Manukau Harbour,New Zealand

The early diagenetic environment of intertidal sandy sediments (sands) and muddy sediments (muds) is described and compared from two cores taken from an unpolluted part of the Manukau Harbour, New Zealand. Extraction techniques characterized the form of the trace elements (Fe, Mn, S, C, Pb, Zn, Cu) at different depths in the sediment. Dissolved forms of Fe, Mn, and S were measured in interstitial water. Nonresidual metal concentrations, humic acid, FeS, and FeS₂ are an order of magnitude higher in the muds than in the sands because of dilution by unreactive sand particles. Muds contain a larger proportion of metals in the mobile fractions; exchangeable (Mn), carbonate (Mn, Fe, Zn), and easily-reducible oxide (Fe, Mn, Zn, Pb). This is due to greater surface area (for Mn adsorption); the favorable conditions for MnCO₃, FeCO₃, and FeS precipitation; and higher concentrations of easily reducible iron oxide and humic acid. Therefore, compared to the sands, muds are more important as reservoirs for toxic metals, both in terms of quantity and availability. At either site there was very little difference between the forms of Zn, Pb or Cu identified by sequential extraction as sediments changed from oxic to anoxic conditions. One reason for this is that the amounts and proportions of some of the important components that bind metals, viz., amorphous iron hydrous oxides, humic acids, and FeS₂, do not change much. Other components that do change with redox conditions, for example, manganese phases and FeS, are only minor components of the sediment. Redox conditions, then, have relatively little effect on trace-metal partitioning in the sediment matrix of these unpolluted sediments.     

Identifying and removing structural biases in climate models with history matching

Climate Dynamics - We describe the method of history matching, a method currently used to help quantify parametric uncertainty in climate models, and argue for its use in identifying and removing...     

Linear MHD Wave Propagation in Time-Dependent Flux Tube

MHD waves and oscillations in sharply structured magnetic plasmas have been studied for static and steady systems in the thin tube approximation over many years. This work will generalize these studies by introducing a slowly varying background density in time, in order to determine the changes to the wave parameters introduced by this temporally varying equilibrium, i.e. to investigate the amplitude, frequency, and wavenumber for the kink and higher order propagating fast magnetohydrodynamic wave in the leading order approximation to the WKB approach in a zero-β plasma representing the upper solar atmosphere. To progress, the thin tube and over-dense loop approximations are used, restricting the results found here to the duration of a number of multiples of the characteristic density change timescale. Using such approximations it is shown that the amplitude of the kink wave is enhanced in a manner proportional to the square of the Alfvén speed, $V_{\mathrm{A}}^{2}$ . The frequency of the wave solution tends to the driving frequency of the system as time progresses; however, the wavenumber approaches zero after a large multiple of the characteristic density change timescale, indicating an ever increasing wavelength. For the higher order fluting modes the changes in amplitude are dependent upon the wave mode; for the m=2 mode the wave is amplified to a constant level; however, for all m≥3 the fast MHD wave is damped within a relatively small multiple of the characteristic density change timescale. Understanding MHD wave behavior in time-dependent plasmas is an important step towards a more complete model of the solar atmosphere and has a key role to play in solar magneto-seismological applications.     

The role of perched aquifers in hydrological connectivity and biogeochemical processes in vernal pool landscapes,Central Valley,California

Relatively little is known about the role of perched aquifers in hydrological, biogeochemical, and biological processes of vernal pool landscapes. The objectives of this study are to introduce a perched aquifer concept for vernal pool formation and maintenance and to examine the resulting hydrological and biogeochemical phenomena in a representative catchment with three vernal pools connected to one another and to a seasonal stream by swales. A combined hydrometric and geochemical approach was used. Annual rainfall infiltrated but perched on a claypan/duripan, and this perched groundwater flowed downgradient toward the seasonal stream. The upper layer of soil above the claypan/duripan is ～0·6 m in thickness in the uplands and ～0·1 m in thickness in the vernal pools. Some groundwater flowed through the vernal pools when heads in the perched aquifer exceeded ～0·1 m above the claypan/duripan. Perched groundwater discharge accounted for 30–60% of the inflow to the vernal pools during and immediately following storm events. However, most perched groundwater flowed under or around the vernal pools or was recharged by annual rainfall downgradient of the vernal pools. Most of the perched groundwater was discharged to the outlet swale immediately upgradient of the seasonal stream, and most water discharging from the outlet swale to the seasonal stream was perched groundwater that had not flowed through the vernal pools. Therefore, nitrate‐nitrogen concentrations were lower (e.g. 0·17 to 0·39 mg l^?1) and dissolved organic carbon concentrations were higher (e.g. 5·97 to 3·24 mg l^?1) in vernal pool water than in outlet swale water discharging to the seasonal stream. Though the uplands, vernal pools, and seasonal stream are part of a single surface‐water and perched groundwater system, the vernal pools apparently play a limited role in controlling landscape‐scale water quality. Copyright © 2005 John Wiley & Sons, Ltd.     

Error analyses of resonant orbits for geodesy

An error analysis of resonant orbits for geodesy indicates that attempts to use resonance to recover high order geopotential coefficients may be seriously hampered by errors in the geopotential. This effect, plus the very high correlations (up to .99) of the resonant coefficients with each other and the orbital period in single satellite solutions, makesindividual resonant orbits of limited value for geodesy. Multiple-satellite, single-plane solutions are only a slight improvement over the single satellite case. Accurate determination of high order coefficients from low altitude resonant satellites requires multiple orbit planes and small drift-periods to reduce correlations and effects of errors of non-resonant geopotential terms. Also, the effects of gravity model errors on low-altitude resonant satellites make the use of tracking arcs exceeding two to three weeks of doubtful validity. Because high-altitude resonant orbits are less affected by non-resonant terms in the geopotential, much longer tracking arcs can be used for them.     

Groundwater biofilm dynamics grown in situ along a nutrient gradient

This paper describes the in situ response of groundwater biofilms in an alluvial gravel aquifer system on the Canterbury Plains, New Zealand. Biofilms were developed on aquifer gravel, encased in fine mesh bags and suspended in protective columns in monitoring wells for at least 20 weeks. Four sites were selected in the same groundwater system where previous analyses indicated a gradient of increasing nitrate down the hydraulic gradient from Sites 1 to 4. Measurements during the current study classified the groundwater as oligotrophic. Biofilm responses to the nutrient gradients were assessed using bioassays, with biomass determined using protein and cellular and nucleic acid staining and biofilm activity using enzyme assays for lipid, carbohydrate, phosphate metabolism, and cell viability. In general, biofilm activity decreased as nitrate levels increased from Sites 1 to 4, with the opposite relationship for carbon and phosphorus concentrations. These results showed that the groundwater system supported biofilm growth and that the upper catchment supported efficient and productive biofilms (high ratio of activity per unit biomass).     

Urban stormwater quality I. Hillcrest,Hamilton, New Zealand

Water quality parameters associated with siltation (non‐volatile and volatile suspended solids), oxygen depletion (chemical and biochemical oxygen demand), nutrient enrichment (N, P), toxicity (Pb, Zn, Cu, Cr, Ni, Cd), and human pathogenic micro‐organisms (coliforms, faecal coliforms, faecal streptococci) were measured in baseflow and stormflow from a residential catchment in Hamilton, New Zealand, from November 1979 to December 1981. A macro‐invertebrate survey was conducted. All parameters, except nitrogen, were predominantly associated with particulate material, and closely followed suspended solids behaviour during storm runoff. The concentrations of these particulate parameters are linearly related to suspended solid concentrations, which implies a reasonable consistency in the particulate source material, probably attributable to the uniform stable land use. The runoff was enriched with nitrate (from septic tank seepage) and the particles by Zn, Pb, and Cu. There was little or no enrichment of the particulates with phosphorus, nitrogen, organic matter, Cr, or Ni relative to catchment soils. Ni, Cr, and Cd were generally below detection limits. Dissolved reactive phosphorus and NH₄ ⁺‐N levels were low and unimportant in total P or N leaving the catchment. Most organic matter was particulate and only slowly degraded, and consequently the biological oxygen demand was only a small fraction (c. 13%) of chemical oxygen demand. Interpretation of the water quality data allows some tentative predictions to be made of potential receiving water impacts. It is doubtful that urban runoff will cause significant oxygen depletion, although the high level of organic‐rich particulate material could lead to a deterioration of receiving water sediments and affect benthic invertebrates. Urban runoff may be an important source of nutrients, but (apart from nitrate) its importance depends on the amount of suspended material in the runoff rather than increased input of nutrients from urban‐related activities. Bacterial counts indicate a poor water quality. The impact of metals will depend largely on the bioavailability of the particulate‐bound fraction. The key to the understanding of transport, treatment, and impact of most potential pollutants in urban runoff is probably their association with particulate materials.     

Spatial differences in persistent organochlorine pollutant concentrations between the Bering and Chukchi Seas (1993)

During August-September 1993, a joint Russian-United States expedition to the Bering and Chukchi Seas took place. Surface water samples were collected from 21 sites and separated into dissolved (duplicates) and suspended solids; 19 sediment and 6 air samples were also collected. These samples were analysed for 19 organochlorine pesticides, 11 chlorobenzenes and 113 PCB congeners. The report provides data on selected compounds which occured in > or = 75% of the water samples. Highest water concentrations were observed for HCH in open waters north and south of the Bering Strait, both regions being similar (alpha-HCH; 2.2 ng/L and lindane: 0.35 ng/L). Air levels observed were also constant (alpha-HCH; 0.041 ng/m3, lindane: 0.0093 ng/m3). Suspended solids and air particulares contributed little to the concentrations in their respective media, an observation common to all analytes except for the PCBs and the DDT residues. The sum of PCB concentrations in water were higher in the Bering Sea area compared to the Chukchi Sea (1.0 vrs 0.67 ng/L) and lower for air (0.46 vrs 0.23 ng/m3). Sum of DDT in water was higher in the Bering Sea than in the Chukchi Sea (0.23 vrs 0.15 ng/L) while in sediments and air, the Bering Sea concentrations were lower (0.95 vrs 1.6 ng/g and 36 vrs 56 pg/m3, respectively). Other organochlorine compounds for which data are presented include: pp'-DDE, pp'-DDT, dieldrin, HCB, 3 chlorobenzenes and 3 PCB congeners. Fluxes of all these chemicals through the Berin Strait are estimated; they ranged from 57 t/a (alpha-HCH) through 26 t/a (for sum of PCBs) to 0.2 t/a (pp'-DDE, dieldrin and 1,2,3-trichlorobenzene). Fugacity ratios for the HCHs and PCBs indicate the alpha-HCH is degassing in both the Bering and Chukchi Seas and that the gamma-isomer is degassing in the Bering Sea and is close to equilibrium (weakly absorbing) in the Chuchi Sea; the sum of PCBs are strongly absorbing in both areas.     

Regional modelling of permafrost thicknesses over the past 130 ka: implications for permafrost development in Great Britain

The greatest thicknesses of permafrost in Great Britain most likely occurred during the last glacial–interglacial cycle, as this is when some of the coldest conditions occurred during the last 1 000 000 years. The regional development of permafrost across Great Britain during the last glacial–interglacial cycle was modelled from a ground surface temperature history based on mean annual temperatures and the presence of glacier ice. To quantify the growth and decay of permafrost, modelling was undertaken at six locations across Great Britain that represent upland glaciated, lowland glaciated, upland unglaciated and lowland unglaciated conditions. Maximum predicted permafrost depths derived in this academic study range between several tens of metres to over 100 m depending upon various factors including elevation, glacier ice cover, geothermal heat flux and air temperature. In general, the greatest maximum permafrost thicknesses occur at upland glaciated locations, with minimum thickness at lowland sites. Current direct geological evidence for permafrost is from surface or shallow processes, mainly associated with the active layer. Further research is recommended to identify the imprint of freeze/thaw conditions in permanently frozen porous rocks from beneath the active layer.