Two and Half Dimensional Simulation of Ridge Effects on the Ground Motion Characteristics

— Seismic responses of weathered and non-weathered ridge models were simulated to study the ridge effects on the ground motion characteristics. The range of ridge slope from 19.98° to 45° was considered to produce a possible set of generalized results. 2.5-D modeling based on parsimonious staggered grid approximation of elastodynamic wave equations was adopted in simulations. Computed results reveal an increase of amplitude of incoming waves with both elevation and the slope of the ridge. Further, the characteristics of surface waves are highly ridge slope dependent. The analysis of responses of weathered and non-weathered ridge models reveals that ridge has caused a strong generation of surface waves near its top. The surface waves are not dominating on the top of the ridge but at some lower elevation. The increase of weathering of ridge further intensified the ridge effect. Analysis in frequency domain, based on spectral ratio method, does not indicate any pattern in the spectral amplification factor and is very much sensitive to slope, source focal mechanism and location. However, on an average there is a continuous decrease of amplification with slope in the vertical component and increase in the transverse component, and it is increasing in the radial component up to slope =38.0° and thereafter decreasing.     

Tidal evolution in close binary systems,III

In this paper we shall investigate the energy of close binary systems of constant momentum takng into consideration the first-order effects of rotation and tidal attraction of the components of finite size. The equations for the momentum and the energy of the system will be set up in Section 2, making use of terms including the effects of finite size of the components of finite degree of central condensation. In Section 3 perturbation theory is applied to these equations using the results of Kopal (1972b) as our initial values. In Section 4 we shall compare our results with the initial values and then discuss variations in our constants and the application to various real systems.     

Calibrating the GOCE accelerations with star sensor data and a global gravity field model

A reliable and accurate gradiometer calibration is essential for the scientific return of the gravity field and steady-state ocean circulation explorer (GOCE) mission. This paper describes a new method for external calibration of the GOCE gradiometer accelerations. A global gravity field model in combination with star sensor quaternions is used to compute reference differential accelerations, which may be used to estimate various combinations of gradiometer scale factors, internal gradiometer misalignments and misalignments between star sensor and gradiometer. In many aspects, the new method is complementary to the GOCE in-flight calibration. In contrast to the in-flight calibration, which requires a satellite-shaking phase, the new method uses data from the nominal measurement phases. The results of a simulation study show that gradiometer scale factors can be estimated on a weekly basis with accuracies better than 2 × 10⁻³ for the ultrasensitive and 10⁻² for the less sensitive axes, which is compatible with the requirements of the gravity gradient error. Based on a 58-day data set, scale factors are found that can reduce the errors of the in-flight-calibrated measurements. The elements of the complete inverse calibration matrix, representing both the internal gradiometer misalignments and scale factors, can be estimated with accuracies in general better than 10⁻³.     

Decadal evolution of tidal flats and channels in the Outer Weser estuary,Germany

This study focuses on the medium scale morphodynamics of the tidal flat and channel system Fedderwarder Priel, located in the Outer Weser estuary (Wadden Sea, Germany). Tidal channels and adjacent flats are highly dynamic systems whose morphologic evolution are driven by tidal, wind, and wave forcings. These coastal environments are an important ecosystem and react to changes in hydrodynamic conditions in various spatial and temporal scales. Based on annual medium-resolution digital elevation models from 1998 to 2016, we describe changes in the surface area over depth with hypsometries and use vertical dynamic trends in order to analyze and visualize the morphologic evolution of the Fedderwarder Priel and adjacent tidal channels. It is shown that several intertidal flats rise in the order of 1.3 to 5.6 cm/year. The findings indicate that the Outer Weser estuary was not in an equilibrium state for the investigated period, and tidal flats accreted with a rate exceeding mean sea level rise.     

The diagenetic geochemistry and contamination assessment of iron,cadmium, and lead in the sediments from the Shuangtaizi estuary,China

Sediment and pore water samples have been collected from the coastal tidal flat in the Shuangtaizi estuary, China, in order to investigate the geochemical behavior of iron, cadmium, and lead during diagenesis and to assess the degree of contamination. The calculated enrichment factors and geoaccumulation indices for separate elements show that anthropogenic activities have had no significant influence on the distribution of Fe and Pb in the study area, whereas the distribution of Cd has been closely influenced in this way. The high percentage of exchangeable Cd (average of 56.34%) suggests that Cd represents a potential hazard to benthic organisms in the estuary. The calculated diffusive fluxes of metals show that the most mobilized metal is Fe (9.22 mg m^?2 a^?1), followed by Cd (0.54 mg m^?2 a^?1) and Pb (0.42 mg m^?2 a^?1). Low Fe²⁺ contents in surface pore water, alongside high chromium-reducible sulfur contents, and low acid-volatile sulfur, and elemental sulfur contents at 0–25 cm depth in sediments show that Fe²⁺ is formed by the reduction of Fe oxides and is transformed first to a solid phase of iron monosulfides (FeS) and eventually to pyrite (FeS₂). The release of adsorbed Pb due to reductive dissolution of Fe/Mn oxides during early diagenesis could be a source of Pb²⁺ in pore water. From the relatively low total organic carbon contents measured in sediments (0.46–1.28%, with an average of 0.94%) and the vertical variation of Cd²⁺ in pore water, sulfide or Fe/Mn oxides (instead of organic matter) are presumed to exert a significant influence on carrying or releasing Cd by the sediments.     

On the assessment of Argo float trajectory assimilation in the Mediterranean Forecasting System

The Mediterranean Forecasting System (MFS) has been operational for a decade, and is continuously providing forecasts and analyses for the region. These forecasts comprise local- and basin-scale information of the environmental state of the sea and can be useful for tracking oil spills and supporting search-and-rescue missions. Data assimilation is a widely used method to improve the forecast skill of operational models and, in this study, the three-dimensional variational (OceanVar) scheme has been extended to include Argo float trajectories, with the objective of constraining and ameliorating the numerical output primarily in terms of the intermediate velocity fields at 350 m depth. When adding new datasets, it is furthermore crucial to ensure that the extended OceanVar scheme does not decrease the performance of the assimilation of other observations, e.g., sea-level anomalies, temperature, and salinity. Numerical experiments were undertaken for a 3-year period (2005–2007), and it was concluded that the Argo float trajectory assimilation improves the quality of the forecasted trajectories with ~15%, thus, increasing the realism of the model. Furthermore, the MFS proved to maintain the forecast quality of the sea-surface height and mass fields after the extended assimilation scheme had been introduced. A comparison between the modeled velocity fields and independent surface drifter observations suggested that assimilating trajectories at intermediate depth could yield improved forecasts of the upper ocean currents.     

Transformation of Carbon and Nitrogen by Earthworms in the Decomposition Processes of Broad-leaved Litters

Earthworms are the important constituents in the decayed food web and the main ecological conditioners in the process of decomposition and nutrient mineralization. The transformation of organic carbon (C) and total nitrogen (N) in the broad-leaved litters ingested by earthworms was researched by means of a laboratory experiment. Experimental samples were collected from broad-leaved Korea Pine mixed forest in Liangshui National Natural Reserve (47°10′50″N, 128°53′20″E) in the northeastern Xiao Hinggan Mountains of Northeast China. The contents of organic C and total N in earthworms, leaf litters and earthworm faeces were analyzed. Results show that the organic C content was in the fol- lowing order: leaf litters>faeces>earthworms, while total N content was contrary to that of the organic C. The organic C contents in the different leaf litters were in the following order: Tilia amurensis>Betula costata>Acer mono, whereas the total N contents in the different leaf litters were: Betula costata>Tilia amurensis>Acer mono. The contents of organic C and total N in the faeces from the different leaf litters were almost consistent with the contents of the leaf litters. After the leaf litters were ingested by earthworms, the organic C, which was transformed to increase earthworms' weights, ac- counted for 3.90%-13.31% of the total ingestion by earthworms, while that in the earthworm faeces accounted for 6.14%-13.70%. The transformed organic C through the other metabolism (e.g., respiration) of earthworms accounted for 75.04%-89.92%. The ingested organic C by earthworms was mostly used for metabolic activities. The N ingested by earthworms was less than organic C. It is estimated that 37.08% of total N was transformed to increase the earthworm's weight, 19.97% into earthworm faeces and 47.86% for the consumption of the earthworm's activities. The earthworms not only increased the content of organic C and total N in the soil, but also decreased the values of C/N in the soil and leaf litters. Earthworms play a major role in the leaf litters' decomposition and transformation.     

Modern modes of provenance and dispersal of terrigenous sediments in the North Pacific and Bering Sea: implications and perspectives for palaeoenvironmental reconstructions

During expedition 202 aboard the RV Sonne in 2009, 39 seafloor surface sediment sites were sampled over a wide sector of the North Pacific and adjoining Bering Sea. The data served to infer land–ocean linkages of terrigenous sediment supply in terms of major sources and modes of sediment transport within an over-regional context. This is based on an integrated approach dealing with grain-size analysis, bulk mineralogy and clay mineralogy in combination with statistical data evaluation (end-member modelling of grain-size data, fuzzy cluster analysis of mineralogical data). The findings on clay mineralogy served to update those of earlier work extracted from the literature. Today, two processes of terrigenous sediment supply prevail in the study area: far-distance aeolian sediment supply to the pelagic North Pacific, and hemipelagic sediment dispersal from nearby land sources via ocean currents along the continental margins and island arcs. Aeolian particles show the finest grain sizes (clay and fine silt), whereas hemipelagic sediments have high abundances of coarse silt. Exposed sites on seamounts and the continental slope are partly swept by strong currents, leading to residual enrichment of fine sand. Four sediment sources can be distinguished on the basis of distinct index minerals revealed by statistical data analysis: dust plumes from central Asia (quartz, illite), altered materials from the volcanic regions of Kamchatka and the Aleutian Arc (smectite), detritus from the Alaskan Cordillera (chlorite, hornblende), and fluvial detritus from far-eastern Siberia and the Alaska mainland (quartz, feldspar, illite). These findings confirm those of former studies but considerably expand the geographic range of this suite of proxies as far south as 39°N in the open North Pacific. The present integrated methodological approach proved useful in identifying the major modern processes of terrigenous sediment supply to the study region. This aspect deserves attention in the selection of sediment core sites for future palaeoenvironmental reconstructions related to aeolian and glacial dynamics, as well as the recognition of palaeo-ocean circulation patterns in general.     

Combining pixel and object based image analysis of ultra-high resolution multibeam bathymetry and backscatter for habitat mapping in shallow marine waters

Habitat mapping data are increasingly being recognised for their importance in underpinning marine spatial planning. The ability to collect ultra-high resolution (cm) multibeam echosounder (MBES) data in shallow waters has facilitated understanding of the fine-scale distribution of benthic habitats in these areas that are often prone to human disturbance. Developing quantitative and objective approaches to integrate MBES data with ground observations for predictive modelling is essential for ensuring repeatability and providing confidence measures for habitat mapping products. Whilst supervised classification approaches are becoming more common, users are often faced with a decision whether to implement a pixel based (PB) or an object based (OB) image analysis approach, with often limited understanding of the potential influence of that decision on final map products and relative importance of data inputs to patterns observed. In this study, we apply an ensemble learning approach capable of integrating PB and OB Image Analysis from ultra-high resolution MBES bathymetry and backscatter data for mapping benthic habitats in Refuge Cove, a temperate coastal embayment in south-east Australia. We demonstrate the relative importance of PB and OB seafloor derivatives for the five broad benthic habitats that dominate the site. We found that OB and PB approaches performed well with differences in classification accuracy but not discernible statistically. However, a model incorporating elements of both approaches proved to be significantly more accurate than OB or PB methods alone and demonstrate the benefits of using MBES bathymetry and backscatter combined for class discrimination.     

Erratum to: Assessment of coastal communities’ vulnerability to floods using indicator-based approach: a case study of Greater Accra Metropolitan Area,Ghana

In this paper, the extent to which the potentially transit-dependent portion of the population is vulnerable to the effects of a hurricane is estimated. The vulnerability of an area is defined as a composite measure of the proportion of disadvantaged persons, distance to transit, and flooding potential of people within an area. Unlike past studies which have focused on the vulnerability of the population in relatively large geographic areas, this study estimates the vulnerability of the population in 30 m × 30 m areas as defined in the National Land Cover Database. Population estimates from the national census at block level are disaggregated to the 30 m × 30 m units using a modified dasymetric mapping method in ArcGIS. The modified mapping method assigns population to each small areal unit using weights estimated by regressing the area of each land use in a census block against the population in that block. The coefficients in the regression analysis are “weights” associating population with each land use, and are used to distribute the population in each census block to the small geographic units based on their land use. In a case study of New Orleans, the results show that some areas are not well served by the existing transit pickup locations, as evidenced by their high vulnerability scores. Reassignment of pickup point locations to cover higher vulnerability score areas was investigated using integer linear programming. The results show that the optimally located pickup points serve areas with a larger average vulnerability score than the current pickup points in the study area. The method appears to be helpful in identifying vulnerable areas that, subsequently, could receive improved hurricane evacuation service in the future.