Isotope Characteristics of Carbonates from Rocks of Greenstone Belts as an Indicator of a Possible Source of Fluids in Precambrian Granulite Complexes: An Example from the Giyani Greenstone Belt and the Limpopo Granulite Complex,South Africa

Doklady Earth Sciences - Data on the carbon and oxygen isotopic composition of carbonates from the rocks of the Giyani greenstone belt, Kaapvaal craton, South Africa are presented. This belt is...     

Faulting, fracturing and in situ stress prediction in the Ahnet Basin, Algeria — a finite element approach

Many low-efficiency hydrocarbon reservoirs are productive largely because effective reservoir permeability is controlled by faults and natural fractures. Accurate and low-cost information on basic fault and fracture properties, orientation in particular, is critical in reducing well costs and increasing well recoveries. This paper describes how we used an advanced numerical modelling technique, the finite element method (FEM), to compute site-specific in situ stresses and rock deformation and to predict fracture attributes as a function of material properties, structural position and tectonic stress. Presented are the numerical results of two-dimensional, plane-strain end-member FEM models of a hydrocarbon-bearing fault-propagation-fold structure. Interpretation of the modelling results remains qualitative because of the intrinsic limitations of numerical modelling; however, it still allows comparisons with (the little available) geological and geophysical data.

In all models, the weak mechanical strength and flow properties of a thick shale layer (the main seal) leads to a decoupling of the structural deformation of the shallower sediments from the underlying sediments and basement, and results in flexural slip across the shale layer. All models predict rock fracturing to initiate at the surface and to expand with depth under increasing horizontal tectonic compression. The stress regime for the formation of new fractures changes from compressional to shear with depth. If pre-existing fractures exist, only (sub)horizontal fractures are predicted to open, thus defining the principal orientation of effective reservoir permeability. In models that do not include a blind thrust fault in the basement, flexural amplification of the initial fold structure generates additional fracturing in the crest of the anticline controlled by the material properties of the rocks. The folding-induced fracturing expands laterally along the stratigraphic boundaries under enhanced tectonic loading. Models incorporating a blind thrust fault correctly predict the formation of secondary syn- and anti-thetic mesoscale faults in the basement and sediments of the hanging wall. Some of these faults cut reservoir and/or seal layers, and thus may influence effective reservoir permeability and affect seal integrity. The predicted faults divide the sediments across the anticline in several compartments with different stress levels and different rock failure (and proximity to failure). These numerical model outcomes can assist classic interpretation of seismic and well bore data in search of fractured and overpressured hydrocarbon reservoirs.     

Ein Beispiel für Sekundärtektogenese auf Java

Zusammenfassung Für die Analyse eines tektonischen Bewegungsbildes ist das Gebirge nördlich von Bandoeng ein geradezu ideales Objekt, weil die hier stattgehabten Bewegungen sehr jungen Alters sind. Wir dürfen annehmen, daß der ganze Prozeß sich im Holozän, zum Teil wahrscheinlich im Neolithicum abgespielt hat.Bei der geologischen Analyse ergibt sich, daß die Dehnung der Erdschichten infolge der Aufwölbung des vulkanischen Gebirges nördlich von Bandoeng 20–40 mal größer ist als eine Ausdehnung, die nur durch die Aufbiegung selbst hervorgerufen worden wäre.Weiterhin zeigt sich, daß gleichzeitig mit dem Auseinandergleiten des aufgewölbten Gebietes eine Zusammenpressung der Schichten am Nordfuß des Tumors stattgefunden hat.Die Parallelisierung der Aufwölbung und der Bruchbildungen einerseits mit dem Zusammenschub und der Faltung am Fuße der Aufwölbung andererseits beruht hier nicht auf paläontologischer Grundlage, mit deren Hilfe die Grenzen auch im günstigsten Falle nicht genauer als auf etwa 10000 Jahre zu ziehen sind. Das gleichzeitige Nebeneinanderauftreten von Auseinanderschieben und Zusammenpressen kann hier mit viel größerer Genauigkeit bewiesen werden, weil eine unmittelbare Parallelisierung der Bewegungen mit Hilfe der Eruptionsgeschichte des Prahoevulkans möglich ist.Außerdem kann ein unmittelbarer Zusammenhang der Bruchnischen (B II) im zentralen Gebirge mit den Blattverschiebungen am Fuß beobachtet werden.     

Decoupling of As and Fe release to Bangladesh groundwater under reducing conditions. Part I: Evidence from sediment profiles

This study reexamines the notion that extensive As mobilization in anoxic groundwater of Bangladesh is intimately linked to the dissolution of Fe oxyhydroxides on the basis of analyses performed on a suite of freshly collected samples of aquifer material. Detailed sediment profiles extending to 40 to 70 m depth below the surface were obtained at six sites where local groundwater As concentrations were known to span a wide range. The sediment properties that were measured include (1) the proportion of Fe(II) in the Fe fraction leached in hot 1.2 N HCl, (2) diffuse spectral reflectance, and (3) magnetic susceptibility.In parallel with local concentrations of dissolved As ranging from <5 to 600 μg/L, Fe(II)/Fe ratios in shallow (gray) Holocene sands tended to gradually increase with depth from values of 0.3 to 0.5 to up to 0.9. In deeper (orange) aquifers of presumed Pleistocene age that were separated from shallow sands by a clay layer and contained <5 μg/L dissolved As, leachable Fe(II)/Fe ratios averaged ∼0.2. There was no consistent relation between sediment Fe(II)/Fe and dissolved Fe concentrations in groundwater in nearby wells. The reflectance measurements indicate a systematic linear relation (R² of 0.66; n = 151) between the first derivative transform of the reflectance at 520 nm and Fe(II)/Fe. The magnetic susceptibility of the shallow aquifer sands ranged from 200 to 3600 (x 10⁻⁹ m³/kg SI) and was linearly related (R² of 0.75; n = 29) to the concentrations of minerals that could be magnetically separated (0.03 to 0.79% dry weight). No systematic depth trends in magnetic susceptibility were observed within the shallow sands, although the susceptibility of deeper low-As aquifers was low (up to ∼200 × 10⁻⁹ m³/kg SI).This set of observations, complemented by incubation results described in a companion paper by van Geen et al. (this volume), suggests that the release of As is linked to the transformation of predominantly Fe (III) oxyhydroxide coatings on sand particles to Fe(II) or mixed Fe(II/III) solid phases with a flatter reflectance spectrum such as siderite, vivianite, or magnetite, without necessarily resulting in the release of Fe to groundwater. The very low As/Fe ratio of magnetically separated minerals compared to the As/Fe of bulk acid leachate (2 vs. 40 10⁻⁶, respectively) suggests that such a transformation could be accompanied by a significant redistribution of As to a mobilizable phase on the surface of aquifer particles.     

Hydrogeological processes in seasonally frozen northern latitudes: understanding, gaps and challenges

The groundwater regime in seasonally frozen regions of the world exhibits distinct behavior. This paper presents an overview of flow and associated heat and solute transport processes in the subsurface, from the soil/vadose zone, through groundwater recharge to groundwater discharge processes in these areas. Theoretical developments, field studies and model development are considered. An illustrative conceptual model of the system is presented. From a groundwater perspective, the dominant effect is the extent of hydraulic isolation between the water above and that below the near-surface frozen zone. The spatial and temporal occurrences of this isolation are seasonally variable and may also be modified under a future changing climate. A good qualitative conceptual understanding of the system has been developed over numerous decades of study. A major gap is the inability to effectively monitor processes in the field, particularly unfrozen water content during freezing conditions. Modeling of field-scale behavior represents a major challenge, even while physically based models continue to improve. It is suggested that progress can be made by combining well-designed field experiments with modeling studies. A major motivation for improving quantification of these processes derives from the need to better predict the impacts of a future changing climate.     

Sediment yield in South Africa — A preliminary geographical analysis

The study examines the spatial relationships between sediment yield and 15 independent environmental variables in 54 catchments in South Africa. Rooseboom's (1978) data on the sediment yield from the catchments were standardized for a single time period. Bivariate regression analyses reveal no simple relationships. Multivariate regression analyses conducted for the whole and various sub-areas of South Africa indicate that latitude and longitude are the primary variables affecting spatial variations in sediment yield. This may be as a result of latitude and longitude being surrogate variables reflecting variation in other environmental variables (e. g. geology, vegetation). Within the sub-areas, 43.4% to 97.8% of the variation in sediment yield is explained by the combined variation in a number of different environmental variables. This study highlights a need for the collection and analysis of more sediment yield data, which would allow the analyses to be refined, to predict sediment yields from ungauged catchments in South Africa.     

Geochemical and electron paramagnetic characteristics of quartz from a multi-stage vein environment, Cowarra gold deposit, New South Wales

The characterisation of quartz using trace element geochemistry and electron paramagnetic resonance measurements has been tested for different generations of quartz veining in the multi-stage hydrothermal vein system at Cowarra. Quartz closely associated with gold mineralisation can be distinguished from earlier and later quartz generations in the mineralised environment, and both types can be distinguished from regional, barren quartz veins. These separate stages of quartz veins are also recognised from their fluid inclusion characteristics. Geochemical differences in the quartz partly reflect the presence of minor mineral inclusions, particularly sulfides and arsenopyrite.The study highlights the importance of understanding the paragenetic sequence of quartz vein development in a mineralised environment and the need for careful, thorough sampling before attempting geochemical and EPR characterisation of quartz as an exploration technique.     

Pyrolysis-high resolution gas chromatography and pyrolysis gas chromatography-mass spectrometry of kerogens and kerogen precursors

A series of kerogens and kerogen precursors isolated from DSDP samples, oil shales and Recent algal mats have been examined by Curie point pyrolysis-high resolution gas chromatography and gas chromatography-mass spectrometry. This study has shown that the three main types of kerogens (marine, terrestrial and mixtures of both) can be characterized using these techniques. The marine (algal) kerogens yield principally aliphatic products and the terrestrial kerogens yield more aromatic and phenolic products with some n-alkanes and n-alkenes. The yields of n-alkanes and n-alkenes increase and phenols decrease with increasing geologic age, however, pyrolysis-GC cannot be used to characterize the influence of short term diagenesis on the kerogen structure.     

Microbially induced calcite precipitation along a circular flow channel under a constant flow condition

Biogrouting is a new ground improvement method that has been studied in recent years. This method involves mainly the use of a microbially induced calcite precipitation process to bind soil particles to increase the strength or to fill in the pores of soil or joints of rock for seepage control. There are two major challenges in the use of biogrout for seepage control through rock joints. The first is how to inject the biogrout solutions, and the second is to understand the mechanisms for the formation of calcite under seepage flow. In this paper, a study on the injection of biogrout solution and the formation of precipitates along a circular 1D flow channel is presented. To minimize the influence of flow, a new one-phase injection method to inject bacterial solution and cementation agents simultaneously was adopted in this study. Factors affecting the formation and distribution of precipitates along the flow channel such as flow velocity, flow rate, and aperture of flow channel were investigated. The experimental results indicated that less calcite was precipitated at locations further away from the injection point due to depletion of the reactants’ concentrations along the flow path. Using the one-phase injection method, the bacterial activity had a major effect on the accumulation of the calcite on the inner surface of the flow channel. The total calcite precipitated on the surface of the flow channel increased slightly with increasing bacterial activity or flow rate. An equation to predict the distance travelled by the biosolution has been derived based on the testing results.