Das Vorland der Alpen und die Vorgeschichte der Alpenfaltung

Ohne Zusammenfassung     

A laboratory study of Equotip surface hardness measurements on a range of sandstones: What influences the values and what do they mean?

The Equotip rebound tester is a simple, non-destructive technique to measure the surface hardness of materials. Having a low impact energy gives the Equotip advantages over the commonly used Schmidt Hammer on weathered rock and stone. In this study we have investigated the influence of different parameters (sample size, moisture content and surface roughness) on the surface hardness values obtained from freshly cut blocks of four types of sandstone. In a series of laboratory experiments both Single Impacts (SIM) and Repeat Impacts (RIM) methods have been used with C and D probes (which have different impact energies). Our results show that whilst sample size is of great importance we find that smaller samples can be reliably evaluated than previously reported. Moisture contents are also found to exert a more important influence on both SIM and RIM results than previously thought, with up to 26% lower hardness values recorded on saturated vs dry sandstone. Conversely, we find that surface roughness (over Sz values of 100 to 800 microns) does not have a significant impact on SIM measurements collected using the D probe. Both SIM and RIM data are found to be good proxies for compressive strength and open porosity, with SIM data collected with the C probe showing the best fits. Data collected using 3D microscopy helps visualize and quantify the small impact marks created by the Equotip and confirms that these are much reduced when using the C vs D probe. The results highlight the benefits of the Equotip to studies of the nature and deterioration of sandstone, the need for careful evaluation of any confounding factors which might influence the values obtained, and illustrate the different advantages of C and D probes. © 2019 John Wiley & Sons, Ltd.     

Influence of soil properties on active layer thermal propagation along the western Antarctic Peninsula

The rate of energy transfer through soils is an important factor governing the active layer (seasonal thaw layer) in polar regions. Energy is transferred through conductive and convective means, which are primarily influenced by the bulk density and water content of soils. With global temperatures changing, it becomes important to understand how soil properties influence heat transfer and active layer depths in climatically sensitive regions, such as the Antarctic Peninsula. In this study we analyzed conductive energy transfer through several soil types on Amsler Island and Cierva Point in the central region of the western Antarctic Peninsula. Active layer temperatures on Amsler Island were monitored every three hours using iButton thermistors installed at regular depth intervals down to 2 m. Soil textures were loamy to sandy with water contents between 5 and 27%. Freezing and thawing transmission rates for all soils ranged from 1.4 to 6.9 cm/day. Thermal transmission rates were fastest in sandy soils with low water contents, indicating that the large, interconnected pores of the sandy soils facilitated the quick movement of heat with water flow through the soil profile. Snow accumulation differences also played a significant role on winter thermal propagation by providing a thermal barrier between the ground surface and atmosphere. Although there was a wide range in thermal transmission among the soils, active layer depths had little variation (7.8–9.7 m). This consistency derives from the greater dependence of very thick active layers on long‐term climatic conditions rather than on soil properties. The presence of thick moss significantly slowed thermal transmission and decreased active layer thicknesses. These effects primarily are due to the high heat capacity of water and air retained within the moss, slowing thermal transmission rates, acting as a thermal buffer between atmospheric conditions and the underlying soils. Copyright © 2016 John Wiley & Sons, Ltd.     

Loss of iron to the Pt-container in melting experiments with basalts and a method to reduce it

The loss of iron from basalts to Pt containers has been investigated as a function of temperature, hydrogen fugacity, run duration, and Fe content of the sample. The loss of iron is very significant even after a short time and increases with increasing temperature and run duration and increasing hydrogen fugacity.The absorbed iron is concentrated in the inner half of the Pt-wall. The iron-containing zone of the Pt broadens only slightly with increasing run duration. Based upon this uneven distribution of Fe in the Pt-wall, a method is developed to reduce iron loss from the sample. By electroplating, a thin film of metallic iron is coated onto the inner surface of the capsule wall in order to get a Fe-Pt alloy in the inner section of the Pt-tube.     

The Astrakhan Arch of the Pricaspian basin: Geothermal analysis and modelling

The Astrakhan Arch (ASAR) region contains one of the largest sub‐salt carbonate structures of the Pricaspian salt basin (located to the northwest of the Caspian Sea), where prospects for hydrocarbon generation and accumulation in the Devonian to Carboniferous deposits are considered to be high. We evaluate the regional vertical temperature gradient within stratigraphic units based on the analysis of 34 boreholes drilled in the region. To show that the thermal gradient is altered in the vicinity of salt diapirs, we study measured temperatures in six deep boreholes. We develop a three‐dimensional geothermal model of the ASAR region constrained by temperature measurements, seismic stratigraphic and lithological data. The temperatures of the sub‐salt sediments predicted by the geothermal model range from about 100 °C to 200 °C and are consistent with the temperatures obtained from the analysis of vitrinite reflectivity and from previous two‐dimensional geothermal models. Temperature anomalies are positive in the uppermost portions of salt diapirs as well as within the salt‐withdrawal basins at the depth of 3.5 km depth and are negative beneath the diapirs. Two areas of positive temperature anomalies in the sub‐salt sediments are likely to be associated with the deep withdrawal basins above and with the general uplift of salt/sub‐salt interface in the southern part of the study region. This implies an enhancement of thermal maturity of any organically rich source rocks within these areas. The surface heat flux in the model varies laterally from about 40 to 55 mW m^?2. These variations in the heat flux are likely to be associated with structural heterogeneities of the sedimentary rocks and with the presence of salt diapirs. The results of our modelling support the hypothesis of oil and gas condensate generation in the Upper Carboniferous to Middle Devonian sediments of the ASAR region.     

Potential future changes in the characteristics of daily precipitation in Europe simulated by the HIRHAM regional climate model

In this study the potential future changes in various aspects of daily precipitation events over Europe as a consequence of the anticipated future increase in the atmospheric greenhouse gas concentrations are investigated. This is done by comparing two 3-member ensembles of simulations with the HIRHAM regional climate model for the period 1961–1990 and 2071–2100, respectively. Daily precipitation events are characterized by their frequency and intensity, and heavy precipitation events are described via 30-year return levels of daily precipitation. Further, extended periods with and without rainfall (wet and dry spells) are studied, considering their frequency and length as well as the average and extreme amounts of precipitation accumulated during wet spells, the latter again described via 30-year return levels. The simulations show marked changes in the characteristics of daily precipitation in Europe due to the anticipated greenhouse warming. In winter, for instance, the frequency of wet days is enhanced over most of the European continent except for the region on the Norwegian west coast and the Mediterranean region. The changes in the intensity and the 30-year return level of daily precipitation are characterized by a similar pattern except for central Europe with a tendency of decreased 30-year return levels and increased precipitation intensity. In summer, on the other hand, the frequency of wet days is decreased over most of Europe except for northern Scandinavia and the Baltic Sea region. In contrast, the precipitation intensity and the 30-year return level of daily precipitation are increased over entire Scandinavia, central and eastern Europe. The changes in the 30-year return level of daily precipitation are generally stronger than the corresponding changes in the precipitation intensity but can have opposite signs in some regions. Also the distribution of wet days is changed in the future. During summer, for instance, both the frequency and the length of dry spells are substantially increased over most of the European continent except for the Iberian Peninsula. The frequency and the length of wet spells, on the other hand, are generally reduced during summer and increased during winter, again, with the exception of the Iberian Peninsula. The future changes in the frequency of wet days in winter are related to a change in the large-scale flow over the North Atlantic and a corresponding shift of the North Atlantic storm track. The reduction in the frequency of wet days in summer is related to a northward extension of the dry subtropical region in the future, with a reduction of the convective activity because of the large-scale sinking motion in the downward branch of the Hadley cell. Because the atmosphere contains more moisture in the warmer future climate, the amount of precipitation associated with individual low-pressure systems or with individual convective events is increased, leading to a general increase in the intensity of individual precipitation events. Only in regions, where all the moisture evaporates from the ground already in spring, the intensity of precipitation events is reduced in summer.     

A procedure to identify natural arsenic sources,applied in an affected area in North Rhine-Westphalia,Germany

The aim of the study was to identify the geogenic source for elevated arsenic (As) concentrations recently discovered in soils of the Heubach plain, North Rhine-Westphalia, Germany. Therefore, a catalogue of conditions that an As source has to fulfil in order to be considered as geogenic was formulated, including the source’s linkage to the sink, its mineralogy, As total content, As mobilization potential, groundwater redox conditions and As output. Accordingly, mineralogical, geo- and hydrochemical investigations were carried out, including X-ray diffractometry, microscopy, ICP-OES and AAS analysis and a sequential extraction procedure. Paleo bog iron ores (PBIOs) of Tertiary age, occurring within unconsolidated sands (Haltern-layers, Santonian–Lower Campanian), and glauconitic marlstones (Dülmen-layers, Lower Campanian) were examined. Results indicate that output from the PBIOs is responsible for the elevated As levels. Accounting their diverse mineralogy, five types of PBIOs were defined. Type-dependent, they at least partly fulfil all of the formulated requirements. The relations and behaviour of As sources and sinks in space and time could be clarified for the area of interest. The approach presented in this paper may offer a tool for identifying natural As sources worldwide.     

Mulching as a means of exploiting dew for arid agriculture?

A traditional mulching technique used in Lanzarote, Canary Islands, allows dry farming as well as pronounced water savings in irrigation. It is known to reduce evaporational losses, but is also supposed to enhance the nocturnal condensation of water vapour from the atmosphere. The mulch layer consists of porous volcanic rock fragments abundantly available on the island. The mulched surface is believed to cool rapidly and to be more hygroscopic than a bare soil surface. This was investigated during a field experiment conducted over 68 nights during different seasons in 2001 and 2002, as well as some simple laboratory measurements. It was found that nocturnal condensation on the mulch surface (max 0.33 mm) was lower than on the bare soil surface (max 0.57 mm) or any one of three alternative mulch substrates. However, a slightly stronger nocturnal cooling of the mulched as compared to the bare surface was present. It is shown that these contrary findings can be explained by the higher hygroscopicity of the dry loam soil, resulting in condensation gains beyond the strict definition of dew. Differences in plant-availability of non-hygroscopic dew water and hygroscopic water uptakes are discussed, and conditions under which mulching would show positive condensation effects are defined. This includes a theoretical section demonstrating that non-hygroscopic mulch layers of a proper thickness can provide small amounts of dew to plant roots at the mulch–soil interface. This condensation could also happen during the day and would be favoured by a high amplitude of the diurnal atmospheric moisture cycle.     

Climatic changes associated with a global “2°C-stabilization” scenario simulated by the ECHAM5/MPI-OM coupled climate model

In this study, concentrations of the well-mixed greenhouse gases as well as the anthropogenic sulphate aerosol load and stratospheric ozone concentrations are prescribed to the ECHAM5/MPI-OM coupled climate model so that the simulated global warming does not exceed 2°C relative to pre-industrial times. The climatic changes associated with this so-called “2°C-stabilization” scenario are assessed in further detail, considering a variety of meteorological and oceanic variables. The climatic changes associated with such a relatively weak climate forcing supplement the recently published fourth assessment report by the IPCC in that such a stabilization scenario can only be achieved by mitigation initiatives. Also, the impact of the anthropogenic sulphate aerosol load and stratospheric ozone concentrations on the simulated climatic changes is investigated. For this particular climate model, the 2°C-stabilization scenario is characterized by the following atmospheric concentrations of the well-mixed greenhouse gases: 418 ppm (CO₂), 2,026 ppb (CH₄), and 331 ppb (N₂O), 786 ppt (CFC-11) and 486 ppt (CFC-12), respectively. These greenhouse gas concentrations correspond to those for 2020 according to the SRES A1B scenario. At the same time, the anthropogenic sulphate aerosol load and stratospheric ozone concentrations are changed to the level in 2100 (again, according to the SRES A1B scenario), with a global anthropogenic sulphur dioxide emission of 28 TgS/year leading to a global anthropogenic sulphate aerosol load of 0.23 TgS. The future changes in climate associated with the 2°C-stabilization scenario show many of the typical features of other climate change scenarios, including those associated with stronger climatic forcings. That are a pronounced warming, particularly at high latitudes accompanied by a marked reduction of the sea-ice cover, a substantial increase in precipitation in the tropics as well as at mid- and high latitudes in both hemispheres but a marked reduction in the subtropics, a significant strengthening of the meridional temperature gradient between the tropical upper troposphere and the lower stratosphere in the extratropics accompanied by a pronounced intensification of the westerly winds in the lower stratosphere, and a strengthening of the westerly winds in the Southern Hemisphere extratropics throughout the troposphere. The magnitudes of these changes, however, are somewhat weaker than for the scenarios associated with stronger global warming due to stronger climatic forcings, such as the SRES A1B scenario. Some of the climatic changes associated with the 2°C-stabilization are relatively strong with respect to the magnitude of the simulated global warming, i.e., the pronounced warming and sea-ice reduction in the Arctic region, the strengthening of the meridional temperature gradient at the northern high latitudes and the general increase in precipitation. Other climatic changes, i.e., the El Niño like warming pattern in the tropical Pacific Ocean and the corresponding changes in the distribution of precipitation in the tropics and in the Southern Oscillation, are not as markedly pronounced as for the scenarios with a stronger global warming. A higher anthropogenic sulphate aerosol load (for 2030 as compared to the level in 2100 according to the SRES A1B scenario) generally weakens the future changes in climate, particularly for precipitation. The most pronounced effects occur in the Northern Hemisphere and in the tropics, where also the main sources of anthropogenic sulphate aerosols are located.