Measuring tree stem diameters using intensity profiles from ground-based scanning lidar from a fixed viewpoint

This paper presents a method for using the intensity of returns from a scanning light detection and ranging (lidar) system from a single viewing point to identify the location and measure the diameter of tree stems within a forest. Such instruments are being used for rapid forest inventory and to provide consistent supporting information for airborne lidars. The intensity transect across a tree stem is found to be consistent with a simple model parameterised by the range and diameter of the trunk. The stem diameter is calculated by fitting the model to transect data. The angular span of the stem can also be estimated by using a simple threshold where intensity values are tested against the expected intensity for a stem of given diameter. This is useful when data are insufficient to fit the model or the stem is partially obscured. The process of identifying tree positions and trunk diameters is fully automated and is shown to be successful in identifying a high proportion of trees, including some that are partially obscured from view. The range and bearing to trees are in excellent agreement with field data. Trunk angular span and diameter estimations are well correlated with field measurements at the plot scale. The accuracy of diameter estimation is found to decrease with range from the scanning position and is also reduced for stems subtending small angles (less than twice the scanning resolution) to the instrument. A method for adjusting survey results to compensate for trees missed due to obscuration from the scanning point and the use of angle count methods is found to improve basal area estimates and achieve agreement within 4% of field measurements.     

Reviewers of the Journal of Geodesy for Volume 79

Acknowledgement for Referees

Reviewers of the Journal of Geodesy for Volume 79     

Effect of signal contamination in matched-filter detection of the signal on a cluttered background

To derive a matched filter for detecting a weak target signal in a hyperspectral image, an estimate of the band-to-band covariance of the target-free background scene is required. We investigate the effects of including some of the target signal in the background scene. Although the covariance is contaminated by the presence of a target signal (there is increased variance in the direction of the target signature), we find that the matched filter is not necessarily affected. In fact, if the variation in plume strength is strictly uncorrelated with the variation in background spectra, the matched filter and its signal-to-clutter ratio (SCR) performance will not be impaired. While there is little a priori reason to expect significant correlation between the plume and the background, there usually is some residual correlation, and this correlation leads to a suppressing effect that limits the SCR obtainable even for strong plumes. These effects are described and quantified analytically, and the crucial role of this correlation is illustrated with some numerical examples using simulated plumes superimposed on real hyperspectral imagery. In one example, we observe an order-of-magnitude loss in SCR for a matched filter based on the contaminated covariance.     

Application of S-SEBI model for crop evapotranspiration using Landsat-8 data over parts of North India

Estimation and monitoring of crop evapotranspiration (ET_c) or consumptive water use over large-area holds the key to irrigation management plans and regional drought preparedness. The objective of this study was to estimate ET_c by applying the simplified-surface energy balance index (S-SEBI) model to Landsat-8 data for the 2014–2015 period in parts of North India. An average ET_c was estimated 2.72 and 2.47 in mm day^?1 with 0.22, 0.18 standard deviation and 0.11, 0.07 standard error for Kharif and Rabi crops, respectively. On validation part, a close relationship was observed between S-SEBI derived and scintillometer observed evaporative fraction with 0.85 correlation coefficient and 0.86 agreement index. The statistical analysis also endorses the results accuracy and reliability with 0.026 and 0.602, relative root-mean square errors and model efficiency for wheat crop, respectively. The study showed that normalized difference vegetation index and LST are closely related and serve as a proxy for qualitative representation of ET_c.     

Geomasking sensitive health data and privacy protection: an evaluation using an E911 database

Geomasking is used to provide privacy protection for individual address information while maintaining spatial resolution for mapping purposes. Donut geomasking and other random perturbation geomasking algorithms rely on the assumption of a homogeneously distributed population to calculate displacement distances, leading to possible under-protection of individuals when this condition is not met. Using household data from 2007, we evaluated the performance of donut geomasking in Orange County, North Carolina. We calculated the estimated k-anonymity for every household based on the assumption of uniform household distribution. We then determined the actual k-anonymity by revealing household locations contained in the county E911 database. Census block groups in mixed-use areas with high population distribution heterogeneity were the most likely to have privacy protection below selected criteria. For heterogeneous populations, we suggest tripling the minimum displacement area in the donut to protect privacy with a less than 1% error rate.     

Variability analysis of groundwater levels — AGIS-based case study

The present study has analyzed the variability in depth to water level below ground level (bgl) vis-à-vis groundwater development and rainfall from 1987 to 2007 in agriculture dominated Kaithal district of Haryana state in India. Spatial distribution of groundwater depth was mapped and classified into different zones using ILWIS 3.6 GIS tools. Change detection maps were prepared for 1987–1997 and 1997–2007. Groundwater depletion rates during successive decades were compared and critical areas with substantial fall in groundwater levels were identified. Further, block wise trends of change in groundwater levels were also analyzed. The water table in fresh belt areas of the district (Gulha, Pundri and Kaithal blocks) was observed to decline by a magnitude ranging from 10 m to 23 m. In Kalayat and Rajaund blocks, the levels were found fluctuating in a relatively narrow range of 4–9 m. During 1997–2007, the depletion has been faster compared to the preceding decade. Excessive groundwater depletion in major part of the district may be attributed to indiscriminate abstraction for irrigation and decrease in rainfall experienced since 1998. Changes in cropping pattern and irrigation methods are needed in the study area for sustainable management of the resource.     

Interaction between a circular opening and fractures originating from its boundary in a piecewise homogeneous plane

The complex variables boundary element method (CVBEM) is used to study interaction between a circular opening and fractures originating from its boundary in a piecewise homogeneous plane. A new complex hypersingular equation for piecewise homogeneous media with a circular opening is obtained. The equation is solved using the CVBEM technique with circular and straight boundary elements and polynomial approximations (with square root asymptotics for crack tip elements) for the unknown functions. The algorithm is verified through comparison with known semi‐analytical and numerical solutions that involve interaction between a circular opening and specific systems of cracks or other openings. New numerical results concerning the interaction of the circular opening with the cracks and circular inclusions are presented. The method is applied to an important problem in the petroleum industry: modelling propagation of hydraulic fractures in the vicinity of a borehole. Copyright © 2000 John Wiley & Sons, Ltd.     

Estimation of Partial Pressure of Carbon Dioxide and Air-Sea Fluxes in Hooghly Estuary Based on In Situ and Satellite Observations

An empirical model is developed and used with remotely sensed predictors: sea surface temperature (SST) and chlorophyll-a concentration (Chl-a), to compute surface water partial pressure of carbon dioxide (pCO_2w) and air-sea fluxes of CO₂ in the Hooghly estuary and its adjacent coastal oceans. In situ observations used here were based on measurements carried out in this region during winter and summer periods in 2008. The estimated pCO_2w compares well with the in situ observations at root mean square error ±18 μatm. In winter, estimated pCO_2w ranges between 320 and 500 μatm with large values (>400 μatm) on the south-western and south-eastern flanks of the coastal domain and lower values (340–375 μatm) on the main-channel. In summer, it remained spatially uniform at 450 μatm. Extrapolation of the results over the study region based on the Moderate Imaging Specroradiometer (MODIS) measured SST and Chl-a suggests that the region is a strong source of atmospheric CO₂ during the summer with net release of 0.095 Tg C year^?1 (equivalent to mean flux of 90 molC m^?2 year^?1) and is a weak source during the winter with net release of 0.006 Tg C yr^?1 (0.5 molC m^?2 year^?1) from the geographical extent of 6000 Km² area.