地下导线随盾构推进逐段接测中的可靠性检验

盾构法施工的要点是需要在井下布设高精度的控制支导线，当我们根据盾构推进进度对导线接测时，由于观测条件、观测方法、观测仪器基本相同，但观测、的成果往往会存在一定的差异，有时我们无法直接判断成果的正确与否，此时，采用测量平差中的统计检验的方法来分析这些观测数据，可以取得比较满意的结果。     

2004年夏季哈尔滨 5次短时强降水天气过程的对比分析

2004年夏季, 哈尔滨在 40d中发生了 5次短时强降水灾害,城市内涝严重,部分交通干线瘫痪.短时强降水天气多发生于中小尺度天气系统,空间尺度小,生命史短,预报难度大.虽然前人在此方面已做过大量工作,但在干旱的气候背景下,为什么频繁发生短时强降水天气,它们的共同特征是什么？本文从环流条件、卫星云图、多普勒雷达回波以及物理量场进行分析,对上述问题进行了探讨.     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

隔震及超高层建筑的地震反应观测

2001年5月24日和6月20日分别发生了宜良4.2级和呈南3.6级两次地震，架设在云南省抗震培训中心隔震大楼和昆明佳华广场的结构强震观测台阵记录了这两栋建筑物对这两次地震反应。本介绍了获取的记录，并分析了两栋建筑物的地震反应情况。     

西北地区煤炭、水资源、环境可持续发展研究

西北地区煤炭资源具有质量优良及资源相对集中的特点、研究西部煤炭资源的合理开发对建立我国合理的能源结构具有十分重要的意义，根据西北水资源和煤矿供水的一些特点，在分析了煤矿开发对水资源的需求与现状的基础上，提出了西北地区煤炭开发的水资源对策及建议。     

测井资料交会图法在火山岩岩性识别中的应用

在火山岩储层研究中，岩性识别显得越来越重要。在评述目前常用的岩性识别方法后，重点以测井资料交会图法为例，以松辽盆地徐家围子断陷升平气田深层白垩系营城组火山岩为对象，优选出密度测井、自然伽玛测井、声波测井、电阻率、钍铀等测井项目的数据进行交会，编制出测井曲线交会图版，并以此为依据识别出该区的火山岩主要岩性有：安山岩、玄武岩、流纹岩和凝灰岩等。识别结果与实际情况相吻合。     

城市群地震灾害特点与防震减灾对策

城市群是我国经济迅速发展的产物。我国东部地区已经涌现了大量的城市群。城市群地震灾害比单个城市的地震灾害更为复杂、严重。地震对社会经济的影响更大。本文首次对城市群的地震灾害特点、防震减灾对策进行了系统的讨论，并着重指出了城市群防震减灾研究的重点领域。     

岩石受压破裂的ULF和LF电磁前兆信号

实验观测到了4类岩性、18块样品在单轴压力下直至破裂发生全过程中的ULF和LF电磁前兆信号。这些不同频率的信号是零散出现的，其形态为一组组脉冲，宽度为4ms～16ms，幅度为0．1mV～1．4mV。实验发现具同一谐振频率的天线收到的信号频次与其相对于裂缝的位置和方位有关。结果还表明，电磁前兆信号的频度与岩样强度有关，抗压强度高的岩样电磁前兆信号多。微破裂可能产生了偶电层，在破裂过程中向外辐射，产生了LF频段的磁信号，ULF磁信号则主要由压磁效应产生。     

Temporal variations of shear-wave splitting in field and laboratory studies in China

Observations of shear-wave splitting at seismic stations above a swarm of small earthquakes on Hainan Island, China, and other examples world-wide, suggest that the time-delays of split shear-waves monitor the build up of stress before earthquakes and the stress release as earthquakes occur. Rock physics experiments on marble specimens also show variations of shear-wave time-delays with uniaxial pressure analogous to the field observations. The rock experiments show an abrupt decrease in time-delays immediately before fracturing occurs. Similar precursory behaviour has been observed before earthquakes elsewhere, and is believed to be important for two reasons. Precursory changes in shear-wave splitting could be used for short-term forecasting, but of greater importance may be the information such behaviour provides about the source processes in earthquake preparation zones.     

Copper-Polymetal Metallogenic Series and Prospecting Perspective of Eastern Section of Gangdise

Geological, geophysical, geochemical and remote sensing comprehensive studies show that big ore-prospecting potentiality is contained in the eastern section of the Gangdise Mountains, Tibet.There are various mineralization types with dominant types of porphyry and exhalation. According to their relations with tectonic evolution, they are divided into four kinds of metallogenic series as follows:magnmtic type (Cr, Pt, Cu, Ni) and exhalation type (Cu, Pb, Zn, Ag) ore deposit series related to Neo-Tethys oceanic crust subduction action (125-96 Ma); epithermai type (Au, Ag, Pb, Zn, Sb), altered fractured rock type (Cu, Mo) and skarn rock type (Cu) ore deposit series related to arc-continental collision; porphyry type (Cu, Mo), cryptoexplosion breccia type (Cu, Au, Pb, Zn), shear zone type (Au, Ag, Sb) and skarn rock type (Cu, Fe) ore deposit series with relation to post-orogenic extensional strike-slip. From subductive complex to the north, zoning appears to be crystallization differentiation type (segregation type)-shear zone type (altered rock type)-skarn rock type, epithermai type-porphyry type-porphyry type and exhalation type-exhalation type-hydrothermai filling-replacement type.The ore deposit is characterized by multi-places from the same source, parity and multi-stage, hypabyssal rock from the deep source and poly genetic compound as a whole.