Analysis of mass concentration of atmospheric particulate matter in a sandstorm course and its affecting factors in the Taklimakan Desert

During the course of a major sandstorm from April 17 to April 23, 2008 in the Taklimakan Desert, data pertaining to the mass concentrations of different-sized atmospheric particulate matter were observed continuously with Grimm 1.108, Thermo RP 1400a, TSP, and CAWS-600 instruments. The results showed that: (1) during the entire sandstorm process there were some differences between the daily mean particle concentration peaks and the hourly mean particle concentration peaks because the actual sandstorm lasted for only about 4 hr, whereas more particles were accumulated in the floating dust days before and after the actual sandstorm; (2) the intensity of the sandstorm was enhanced with the increase of wind speed, and this was related to the peak mass concentrations of atmospheric particulate matter; the wind speed directly affected the concentration of atmospheric particulate matter: the higher the wind speed, the higher the mass concentration (>0.23 μm was 39,496.5 μg/m³, and >20.0 μm was 5,390.7 μg/m³); (3) the concentration changes of PM₁₀ and TSP were also related to the course and intensity of the sandstorm; and (4) the mass concentration of atmospheric particulate matter had the following sequence during the dust weather: clear day < floating dust < floating and blowing dust < sandstorm. Temperature, relative humidity, and barometric pressure are important factors affecting the strength of storms, which could also indirectly affect the concentration change of atmospheric particulate matter.     

离子液体调控溶剂热合成TiO2纳米颗粒及紫外-可见光催化降解性能

以钛酸四丁酯(TEOS)、去离子水为原料,离子液体1-丁基-3-甲基四氟硼酸咪唑盐([Bmim]BF4)为表面活性剂,通过溶剂热法制备了锐钛矿相TiO2纳米颗粒。用X-射线衍射仪(XRD)、扫描电镜(SEM)、紫外-可见吸收光谱仪(UV-Vis)对产物的晶相、形貌和光学性能进行表征。为了评估光催化活性,并以甲基橙水溶液为研究对象,在紫外光照射下分析不同照射时间下光降解效率。结果表明,离子液体、去离子水和钛酸四丁酯的体积比为1.3∶1∶1.3时,反应所得到的TiO2具有较高光催化活性,明显优于未添加离子液体的产品,这一结果可归因于其具有较大的比表面积。     

Geology and geochemistry of the Bingdaban ophiolitic mélange in the boundary fault zone on the northern Central Tianshan Belt,and its tectonic implications

The properties and tectonic significance of the fault bound zone on the northern margin of the Central Tianshan belt are key issues to understand the tectonic framework and evolutionary history of the Tianshan Orogenic Belt. Based on the geological and geochemical studies in the Tianshan orogenic belt, it is suggested that the ophiolitic slices found in the Bingdaban area represent the remaining oceanic crust of the Early Paleozoic ocean between the Hazakstan and Zhungaer blocks. Mainly composed of basalts, gabbros and diabases, the ophiolites were overthrust onto the boundary fault between the Northern Tianshan and Central Tianshan belts. The major element geochemistry is characterized by high TiO₂ (1.50%–2.25%) and MgO (6.64%–9.35%), low K₂O (0.06%–0.41%) and P₂O₅ (0.1%–0.2%), and Na₂O>K₂O as well. Low ΣREE and depletion in LREE indicate that the original magma was derived from a depleted mantle source. Compared with a primitive mantle, the geochemistry of the basalts from the Bingdaban area is featureded by depletion in Th, U, Nb, La, Ce and Pr, and unfractionated in HFS elements. The ratios of Zr/Nb, Nb/La, Hf/Ta, Th/Yb and Hf/Th are similar to those of the typical N-MORB. It can be interpreted that the basalts in the Bingdaban area were derived from a depleted mantle source, and formed in a matured mid-oceanic ridge setting during the matured evolutionary stage of the Northern Tianshan ocean. In comparison with the basalts, the diabases from the Bingdaban area show higher contents of Al₂O₃, ΣREE and HFS elements as well as unfractionated incompatible elements except Cs, Rb and Ba, and about 10 times the values of the primitive mantle. Thus, the diabases are thought to be derived from a primitive mantle and similar to the typical E-MORB. The diabases also have slight Nb depletion accompanying no apparent Th enrichment compared with N-MORB. From studies of the regional geology and all above evidence, it can be suggested that the diabases from the Bingdaban area were formed in the mid-oceanic ridge of the Northern Tianshan ocean during the initial spreading stage. Supported by the Major State Research Program of PRC (Grant No. 2001CB409801), the National Natural Science Foundation of China (Grant Nos. 40472115 and 40234041) and the State Research Program of China Geological Survey (Grant No. 2001130000-22)     

嘉山地震台大地电场资料真实性分析

分析嘉山地震台自2007年运行以来的大地电场观测资料,并对数据的变化特征进行研究,总结分析部分干扰引起的电场变化的曲线特征,给出不同影响因素导致的曲线异常变化情况,为大地电场干扰排除提供依据.     

中国西南及邻区上地幔P波三维速度结构/

利用ISC报告以及中国和NEIC基本测震台网报告中的80974条P波初至到时资料（地震数为7053，台站数为165，且地震和台站都分布在研究区内），对中国西南及邻区（北纬10～36、东经70～110）的深至400km的上地幔三维速度结构进行了研究，分辨率达22．初步结果表明:①研究区速度的横向不均匀性，虽随深度增加而减弱，但至400km深度时仍很明显；②在北纬16和24的纵剖面上，可以看到与印度板块向东和欧亚板块相碰撞挤压相对应的速度结构，以及印度板块与欧亚板块速度结构的差异．在东经90的纵剖面上，与印度板块向北俯冲到欧亚板块（青藏高原）之下相对应的速度结构也比较明显；③在90ｋｍ深度的横剖面上，由缅甸的密支那至越南的洞海的低速条带，可能与红河断裂带有关；④ 提出并使用了能够更为准确直观地描述分辨率好坏的图示方法．      

Electric Potential and Fréchet Derivatives for a Uniform Anisotropic Medium with a Tilted Axis of Symmetry

In this paper we develop analytic solutions for the electric potential, current density and Fréchet derivatives at any interior point within a 3-D transversely isotropic medium having a tilted axis of symmetry. The current electrode is assumed to be on the surface of the Earth and the plane of stratification given arbitrary strike and dip. Profiles can be computed for any azimuth. The equipotentials exhibit an elliptical pattern and are not orthogonal to the current density vectors, which are strongly angle dependent. Current density reaches its maximum value in a direction parallel to the longitudinal conductivity direction. Illustrative examples of the Fréchet derivatives are given for the 2.5-D problem, in which the profile is taken perpendicular to strike. All three derivatives of the Green’s function with respect to longitudinal conductivity, transverse resistivity and dip angle of the symmetry axis (dG/dσ_l, dG/dσ_t, dG/dθ₀) show a strongly asymmetric pattern compared to the isotropic case. The patterns are aligned in the direction of the tilt angle. Such sensitivity patterns are useful in real-time experimental design as well as in the fast inversion of resistivity data collected over an anisotropic earth.     

Estimation of statistical parameters for censored lognormal hydraulic conductivity measurements

Field tests of hydraulic conductivity (e.g., injection test, pumping test, etc.) in low permeability formations are subject to censoring due to the detection limit of the instruments used. An iterative method of estimating the mean and variance of hydraulic conductivity data with a presumed log-normal distribution function is presented. This method accounts for the data that are actually below the lower detection limit (called truncated data) and thus gives distribution parameters that are more representative for the underlying distribution. The proposed method is then tested on two simulated normally distributed random datasets having different variances. The results show that the means and variances estimated by the proposed method are very accurate. Finally, the method is used to estimate the mean and variance of hydraulic conductivity data from single hole water injection tests in a fractured geological formation.     

PMODTRAN: a parallel implementation based on MODTRAN for massive remote sensing data processing

MODerate resolution atmospheric TRANsmission (MODTRAN) is a commercial remote sensing (RS) software package that has been widely used to simulate radiative transfer of electromagnetic radiation through the Earth's atmosphere and the radiation observed by a remote sensor. However, when very large RS datasets must be processed in simulation applications at a global scale, it is extremely time-consuming to operate MODTRAN on a modern workstation. Under this circumstance, the use of parallel cluster computing to speed up the process becomes vital to this time-consuming task. This paper presents PMODTRAN, an implementation of a parallel task-scheduling algorithm based on MODTRAN. PMODTRAN was able to reduce the processing time of the test cases used here from over 4.4 months on a workstation to less than a week on a local computer cluster. In addition, PMODTRAN can distribute tasks with different levels of granularity and has some extra features, such as dynamic load balancing and parameter checking.     

直达波法测定整板基础砼强度

本文以某工程为例,介绍了直达波法测定整板基础砼强度的技术方法;其结果可避免以往回弹法测量结果离散度较大而引起的争议。     

2005年1月18日乳山ML4.3地震序列

对2005年1月18日乳山ML4.3地震序列特征及烈度分布进行了介绍, 认为乳山ML4.3地震序列是一次能量衰减较快、频度起伏衰减的主-余型地震序列, 序列本身不具有明显的前兆意义.