利用MATLAB实现图像处理与分析

本文通过对图像的均衡操作、二值图像的处理、小波去噪等实例，介绍了MATLAB进行图像处理和分析的实用方法与技巧，它对各种软钉包、进行图像处理和分析等，提供了高效便捷的方法。     

自适应GM(1,1)模型进行地表沉降预报

提出采用自适应GM( 1 ,1 )模型进行地表沉降预报 ,并用于兖州某矿形变控制点的沉降预报 ,效果令人满意。说明此模型具有实用价值。     

GPS RTK测量技术的应用与体会

GPS RTK测量技术以快捷、精准的特点广泛地被测量人员所接受，但是在到量中仍存在一些问题需要研究。本文介绍了几种经常遇到的棘手问题及其解决方法。     

苏州市轻轨精密工程控制网的建立

根据精密工程控制网的高精度要求，结合沉降地区的特点，进行GPS、精密水准作业中误差分析及精度控制分析，提出满足轻轨工程施工的控制方案。     

Analysis of the Chiufengershan landslide triggered by the 1999 Chi-Chi earthquake in Taiwan

A disastrous earthquake rocked Taiwan on September 21, 1999, with magnitude M_L=7.3 and an epicenter near the small town of Chi-Chi in central Taiwan. The Chi-Chi earthquake triggered landslide on the dip slope at the Chiufengershan. In this study, a review of the topography and geology of this area was followed by field investigations. Laboratory testing was applied to understand the geomaterial composing the slope. Then, based on a series of limit equilibrium analyses, the failure mechanism of this landslide and the risk of the residual slope were studied.

According to the stability analyses, the pre-quake slope is quite stable, with factor of safety of 1.77 (dry) to 1.35 (full groundwater level); explaining why there is no written record of a landslide here for the past 100 years. In contrast, a back analysis shows that the Chi-Chi earthquake-induced dynamic loading is far more than the dip slope can sustain, due in part to the short distance to the epicenter. A Monte Carlo type probability analysis suggests that the residual slope is more dangerous than the pre-quake slope and needs more attention.     

Caledonian Low-Temperature Granulite-Facies Metamorphism in the West Kunlun Orogenic Belt—SHRIMP Chronological Evidence from Zircon

The West Kunlun orogenic belt is located at the conjunction of the paleo-Asian tectonic system and the Tethys tectonic system. Petrological and mineralogical studies of the Early Cambrian metamorphic surface crust in this region have shown that in case the metamorphism reached low-temperature granulate facies, the typical mineral assemblage is biotite-garnet-silimanite-K feldspar-plagioclase-quartz. The peak metamorphic temperatures are within the range of 720–740°C and the pressure is 0.6 GPa ±. Three types of metamorphic zircon have been detected in the metamorphic rocks: the complex inclusion-bearing type ; the early relic zircon inclusion-bearing type; and the inclusion-free type. SHRIMP age determination of these three types of metamorphic zircon have revealed that these zircons were formed principally during 400–460 Ma, indicating that pre-Cambrian metamorphic surface crust rocks underwent low-temperature granulite facies metamorphism during the Caledonian. In combination with the geological characteristics of this region, it is considered that when the oceanic basin was closed, there occurred intense intracontinental subduction (type A), bringing part of the Early Cambrian metamorphic basement in this region downwards to the lower crust. Meanwhile, there were accompanied with tectonic deformation at deep levels and medium- to high-grade metamorphism. This study provided important chronological and mineralogical evidence for the exploration of the evolutionary mechanism and process of the West Kunlun Early Paleozoic. Part of the results from the research project “ Research on the West Kunlun pre-Cambrian tectonic events” under the program “ Research on the important geological problems of China’ s pre-Cambrian” (No. 200113900070) sponsored by the China National Geological Surveying Bureau.     

Geology and Genesis of the Ta'ergou Skarn - Quartz Vein Tungsten Deposit in the North Qilian Caledonian Orogenic Belt, Northwest China

Abstract. The Ta'ergou tungsten deposit in Gansu province, northwestern China, is located in the western part of the North Qilian Caledonian orogen, and consists of scheelite skarn bodies and wolframite quartz veins. The tungsten‐bearing skarn developed by the replacement of carbonate layers intercalated in the Precambrian schist and amphibolite whereas wolframite‐quartz ore veins developed along a group of fractures that cut through horizontal skarns. The Ta'ergou tungsten deposit is genetically related to the Caledonian Yeniutan granodiorite intrusion and occurs ca. 500 m wide in the exo‐contact zone 300 ～ 500 m apart from the intrusion. The granodiorite displays a lower grade of differentiation, low content of SiO₂ and high contents of mafic components. There are three types of fluid inclusions in the wolframite‐quartz vein systems, i. e. aqueous, CO₂‐H₂O and CO₂‐rich. The homogenization temperature of aqueous inclusion ranges from 140 to 380d?C and their salinities from 6.4 to 17.4 equivalent wt% NaCl. Laser Raman spectroscopy shows that the inclusions contain a relatively high content of CO₂. The δ³⁴S values of skarn type sulfides range from +8.1 to +12.7 per mil and those of quartz vein sulfides from +9.3 to +14.9 per mil, similar to sulfides of the granodiorite with from +6.0 to +11.7 per mil. The δ¹⁸O values of quartz are between +10.5 and +13.3 per mil and those of wolframite between +3.4 and +5.1 per mil. The δ¹⁸O water values of ore forming fluids range from +0.6 to +6.4 per mil and suggest the mixture of magmatic fluids with meteoric water formed the ore‐forming fluids. It has been proved that Precambrian strata in the west sector of North Qilian region are enriched in tungsten. We propose the strata were remelted to be tungsten‐granitoid during subduction. The polymetallic tungsten was gradually accumulated into the roof pendants of the granite intrusion by fractional crystallization and then was deposited by hydrothermal fluids during metasomatism and infilling along fractures. On the other hand, the granite intrusion also acted as “heating machine” to make hydrothermal fluids leach out the metals from Precambrian strata and these metals joined the ore‐forming hydrothermal system.     

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.     

Theory and Method of Mineral Resource Prediction Based on Synthetic Information

Metallogenic prognosis of synthetic information uses the geological body and the miaeral resource body as a statistical unit to interpret synthetically the information of geology, geophysics, geo-chemistry and remote sensing from the evolution of geology and puts all the information into one entire system by drawing up digitalized interpretation maps of the synthetic information. On such basis, differ-ent grades and types of mineral resource prospecting models and predictive models of synthetic informa-tion can be established. Hence, a new integrated prediction system will be formed of metallogenic prog-nosis (qualitative prediction), mineral resources statistic prediction (determining targets) and mlaeral resources prediction (determining resources amount).     

Spatial Database Management System of China Geological Survey Extent

The spatial database management system of China geological survey extent is a social service system. Its aim is to help the government and the whole social public to expediently use the spatial database, such as querying, indexing, mapping and product outputting. The management system has been developed based on MAPGIS6. x SDK and Visual C , considering the spatial database contents and structure and the requirements of users. This paper introduces the software structure, the data flow chart and some key techniques of software development.