Assessment of proposed approaches for bathymetry calculations using multispectral satellite images in shallow coastal/lake areas: a comparison of five models

Bathymetric information for shallow coastal/lake areas is essential for hydrological engineering applications such as sedimentary processes and coastal studies. Remotely sensed imagery is considered a time-effective, low-cost, and wide-coverage solution for bathymetric measurements. This study assesses the performance of three proposed empirical models for bathymetry calculations in three different areas: Alexandria port, Egypt, as an example of a low-turbidity deep water area with silt-sand bottom cover and a depth range of 10.5 m; the Lake Nubia entrance zone, Sudan, which is a highly turbid, unstable, clay bottom area with water depths to 6 m; and Shiraho, Ishigaki Island, Japan, a coral reef area with varied depths ranging up to 14 m. The proposed models are the ensemble regression tree-fitting algorithm using bagging (BAG), ensemble regression tree-fitting algorithm of least squares boosting (LSB), and support vector regression algorithm (SVR). Data from Landsat 8 and Spot 6 satellite images were used to assess the performance of the proposed models. The three models were used to obtain bathymetric maps using the reflectance of green, red, blue/red, and green/red band ratios. The results were compared with corresponding results yielded by two conventional empirical methods, the neural network (NN) and the Lyzenga generalised linear model (GLM). Compared with echosounder data, BAG, LSB, and SVR results demonstrate higher accuracy ranges from 0.04 to 0.35 m more than Lyzenga GLM. The BAG algorithm, producing the most accurate results, proved to be the preferable algorithm for bathymetry calculation.     

Isotopic,mineralogical, and thermobarometric variations of Al-Wahbah crater (Maklaa Tameya), Kishb area,Saudi Arabia

The Cenozoic volcanism of western Saudi Arabia extends from southern Yemen to Jordan northward. They cover an area of nearly 180,000 km². The rocks are dominated by alkali olivine basalts and olivine basalts. Al-Wahbah crater, a part of Harrat Kishb, represents a model occurrence to study the gneisses of these rocks. New mineral chemistry and isotopic data are presented. It aims to follow the isotopic, mineralogical, and thermobarometry variations among these volcanics. Amphiboles of the studied volcanics belong to the monoclinic calcic group. The chemistry of the amphibole crystals shows two ranges of pressure. They are 3.6–5.6 and 0.38–0.78 kbar. The Al_iv values of the amphiboles are in the range of 1.202 and 1.407, indicating corresponding temperature condition of 820–920 and 620–720 °C, respectively. The feldspar of the studied samples has the composition of plagioclase, though some grains have sanidine composition. They are formed in temperature range of 975 and 400 °C. The coexisting amphiboles and plagioclases indicate two sets of pressure and temperature. They are 540–575 °C (3.5–4 kbar) and 510–525 °C (~2 kbar), respectively. Rb–Sr isochron of the whole rock yields an age of 0.867 ± 0.160 Ma with initial Sr⁸⁷/Sr⁸⁶ of 0.702 ± 0.00086. The low initial ratio of Sr⁸⁷/Sr⁸⁶ together with positive values of εNd today implies that the studied volcanics have mantle source. Meanwhile, the present isotopic data suggest extraction of juvenile magma from asthenosphere source. The present study shows that the Al-Wahbah crater rocks belong to Cenozoic basalts and indicate EM-I-like signature.     

Pore to pore validation of pore network modelling against micromodel experiment results

Pore network modelling (PNM) has been widely used to study the multiphase flow and transport in porous media. Although a number of recent papers discussed the PNM validation on core-scale parameters such as permeability, relative permeability and capillary pressure; quantitative predictive potential of PNM on pore by pore basis has rarely been studied. The aim of this paper is to present a direct comparison between PNM simulations and corresponding micro-model experiments at the same scale and the same geometry. A number of well-defined and constrained two-phase flow in porous medium experimental scenarios were utilized to validate the physics solving part in PNM (filling rules, capillary and viscous pressure). This work validates that a dynamic pore network flow solver can predict two-phase flow displacements for these experiments for drainage situations at both pore and plug scales. A glass-etched micro-model is used to quantify the accuracy of a dynamic PNM solver on pore and core levels. Two-phase drainage micro fluidic experiments at different flow conditions are performed on micro-models. PNM simulations are performed on the same pattern and flow conditions as used in micro-model experiments. The two-phase distribution extracted from experiment images is registered onto rsults of PNM simulations for direct pore to pore comparison. Pore-scale matching level is found at around 75 % for all three test cases. The matching level of core-scale parameters such as S _{w c} and oil-phase permeability varies from case to case; the relative error to micro-model experiment measurements varies from 15 to 60 %. Possible reasons leading to discrepancies on core-scale parameters are discussed: missing considerations during validation of the combination of uncertainty in both simulator input parameters and experiments are seen as the principal factors.     

Wrench structural deformation in Ras Al Hilal-Al Athrun area, NE Libya: a new contribution in Northern Al Jabal Al Akhdar Belt

Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D₁, D₂, and D₃) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D₁ deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D₂ deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D₂ led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D₃ deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.     

Tectonic evolution of the Southern Gulf of Suez, Egypt: a comparison between depocenter and near peripheral basins

The sedimentary pattern of the southern Gulf of Suez, Egypt, especially during the Cenozoic rift stage, was controlled mainly by tectonic activities (subsidence and uplift) and sea level change. The stratigraphic record of the southern Gulf of Suez can be divided into two megasequences: pre-rift and syn-rift. The pre-rift megasequence can be viewed as two distinctive depositional regimes, clastic rocks of continental to braided stream environment during Cambrian and open marine transgression extended from Upper Cretaceous till Eocene. The syn-rift deposits showed a distinctive contrast between the depocenter and peripheral basins. This difference can be shown clearly on the sedimentary sequence of Hilal and Shoab Ali oilfields. The syn-rift megasequence can be differentiated in relation to rift evolution into the following stages: initial rift stage with low subsidence rate, main rift stage with maximum subsidence rate, quiescence stage with the slowest subsidence rate throughout the rift evolution, evaporite stage with restriction conditions, and Pliocene–Recent stage with shallow marine condition.     

A hydrochemical study of the Hammam Righa geothermal waters in north-central Algeria

This study focuses on the hydrochemical characteristics of 47 water samples collected from thermal and cold springs that emerge from the Hammam Righa geothermal field, located in north-central Algeria. The aquifer that feeds these springs is mainly situated in the deeply fractured Jurassic limestone and dolomite of the Zaccar Mount. Measured discharge temperatures of the cold waters range from 16.0 to 26.5 °C and the hot waters from 32.1 to 68.2 °C. All waters exhibited a near-neutral pH of 6.0–7.6. The thermal waters had a high total dissolved solids (TDS) content of up to 2527 mg/l, while the TDS for cold waters was 659.0–852.0 mg/l. Chemical analyses suggest that two main types of water exist: hot waters in the upflow area of the Ca–Na–SO₄ type (Hammam Righa) and cold waters in the recharge zone of the Ca–Na–HCO₃ type (Zaccar Mount). Reservoir temperatures were estimated using silica geothermometers and fluid/mineral equilibria at 78, 92, and 95 °C for HR4, HR2, and HR1, respectively. Stable isotopic analyses of the δ¹⁸O and δD composition of the waters suggest that the thermal waters of Hammam Righa are of meteoric origin. We conclude that meteoric recharge infiltrates through the fractured dolomitic limestones of the Zaccar Mount and is conductively heated at a depth of 2.1–2.2 km. The hot waters then interact at depth with Triassic evaporites located in the hydrothermal conduit (fault), giving rise to the Ca–Na–SO₄ water type. As they ascend to the surface, the thermal waters mix with shallower Mg-rich groundwater, resulting in waters that plot in the immature water field in the Na–K–Mg diagram. The mixing trend between cold groundwaters from the recharge zone area (Zaccar Mount) and hot waters in the upflow area (Hammam Righa) is apparent via a chloride-enthalpy diagram that shows a mixing ratio of 22.6 < R < 29.2 %. We summarize these results with a geothermal conceptual model of the Hammam Righa geothermal field.     

A Miocene-restricted platform of the Zibane zone (Saharan Atlas,Algeria), depositional sequences and paleogeographic reconstruction

Depositional sequences and paleogeographic evolution of the Miocene deposits have been studied in the Zibane zone (Saharan Atlas, Algeria) located at the north of the African platform. During the Miocene, this region corresponded to a fault-bounded collapse area and filled by diversified deposits, showing important lateral facies and thicknesses variations. The studied deposits are divided into five depositional sequences separated by major unconformities. These depositional sequences are well developed in the whole basin and testify a paleogeographic differentiation from E–W, induced by a set of NW-SE-trending old faults inherited from the Atlasic orogeny. The organization and the development of those sequences make it possible to correlate them better to the basin scale, which is integrated in a model of restricted platform intersected by NW-SE faults where the tectonic-sedimentation duality is predominant. These new data point to a paleogeographic evolution different from the one usually admitted environment for this region during Miocene time and plead in favour of a reconsideration of the depositional environments of the post-Burdigalian formations in the Zibane zone of the Algerian Atlasic domain.     

Geochemistry and petrogenesis of Sikait leucogranite, Egypt: an example of S-type granite in a metapelitic sequence

 The Sikait leucogranite (SLG) is a body of porphyritic garnet granite intruded a metapelitic sequence and interlayered orthogneisses. Multiple deformation and low- to medium-grade metamorphism of the sequence was closely associated with pluton emplacement. Textural features of the SLG indicate that subsolidus plastic deformation was induced during the extensive thrusting. The granite is strongly peraluminous, alkali-rich and HFS (high field-strength) elements-depleted with low contents of REE, all facts that substantiate the geochemical characteristics of S-type granites. The geologic and geochemical features are consistent with a dehydration melting model of the hosted metapelites to generate the peraluminous SLG. However, geochemical modelling of trace elements and REEs suggest that the anatectic partial melt was subsequently affected by fractional crystallization of feldspars. This could explain much of the chemical attributes of SLG. Received: 20 September 1994 / Accepted: 2 August 1996     

Pan-African adakitic rocks of the north Arabian–Nubian Shield: petrological and geochemical constraints on the evolution of the Dokhan volcanics in the north Eastern Desert of Egypt

The Precambrian basement of Egypt is part of the Red Sea Mountains and represents the north-western part of the Arabian–Nubian Shield (ANS). Five volcanic sections are exposed in the Egyptian basement complex, namely El Kharaza, Monqul, Abu Had, Mellaha and Abu Marwa. They are located in the north Eastern Desert (ED) of Egypt and were selected for petrological and geochemical studies as they represent the Dokhan volcanics. The volcanics divide into two main pulses, and each pulse was frequently accompanied by deposition of immature molasse type sediments, which represent a thick sequence of the Hammamat group in the north ED. Compositionally, the rocks form a continuum from basaltic andesite, andesite, dacite (lower succession) to rhyodacite and rhyolite (upper succession), with no apparent compositional gaps. These high-K calc-alkaline rocks have strong affinities to subduction-related rocks with enriched LILEs (Rb, Ba, K, Th, Ce) relative to high field strength elements (Nb, Zr, P, Ti) and negative Nb anomalies relative to NMORB. The lower succession displays geochemical characteristics of adakitic rocks with SiO₂ >53 wt%, Al₂O₃ >15 wt%, MgO >2.5 wt%, Mg# >49, Sr >650 ppm, Y <17 ppm, Yb <2 ppm, Ni >25 ppm, Cr >50 ppm and Sr/Y >42.4. They also have low Nb, Rb and Zr compared to the coexisting calc-alkaline rhyodacites and rhyolites. The highly fractionated rhyolitic rocks have strong negative Eu anomalies and possess the geochemical characteristics of A-type suites. Trace element geochemical signatures indicate a magma source consistent with post-collisional suites that retain destructive plate signatures associated with subduction zones. The adakitic rocks in the northern ANS are generated through partial melting of delaminated mafic lower crust interacting with overlying mantle-derived magma. The Dokhan volcanics were likely generated by a combination of processes, including partial melting, crystal fractionation and assimilation.     

Geomorphology and sedimentary/biosedimentary structures of the intertidal environment along the coast of Kuwait,north-western Arabian Gulf

The coast of Kuwait can be divided into nine intertidal geomorphological subunits, of which four are found along the northern muddy shoreline and five along the southern sandy shoreline. In the north the coast is characterized by wide intertidal mudflats, bounded landward by an extensive coastal sabkha which is partly covered by sand drifts. The upper part of the intertidal environment is covered with a mixture of aeolian sands and muddy sediments of marine origin. A number of shallow tidal channels dissect the intertidal flats and small sand bars occur near the low water line. In contrast, the southern shore is characterized by relatively steep sandy beaches fronted by narrow to moderately wide rocky intertidal platforms which are partly covered by sand, bioherms, skeletal debris and algal mats. In some areas the rocky surface is dissected by numerous small gulleys and shallow channels. Multiple sand bars lying either parallel or diagonal to the shoreline are developed near the low water line. This southern intertidal environment is bounded landward by a sandy berm and a wave-cut cliff.Ripple marks are developed almost parallel to the shoreline, showing different flow directions. Energy levels are moderate to high along the southern shore, but low along the northern shore. In the south, waves induced by winds blowing mostly from the north-east and south-east form the dominant energy source, whereas tidal and wind-driven currents are the only tangible process acting along the northern shore.